Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Chevrolet SSR Key Replacement

Lost or broken Chevrolet SSR key? Big Daddy Car Key Replacement cuts and programs a new one at your vehicle, 24 hours a day. No tow and no dealer appointment.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Chevrolet SSR Key Replacement by Big Daddy Car Key Replacement

Quick answer

Big Daddy Car Key Replacement cuts and programs Chevrolet SSR keys on site across Los Angeles County, Ventura County and the Anaheim area of Orange County, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.

Last updated

Vehicle
Chevrolet SSR
Model years covered
2003–2006
Service area
Los Angeles, Ventura & Orange County
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your vehicle
Phone
(562) 550-7206
On this page

Chevrolet SSR keys made and programmed on site

The Chevrolet SSR was sold in the United States for model years 2003–2006, and its key technology changed along the way. We make keys for every one of those years: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Chevrolet key technology varies widely by model: full-size trucks and SUVs used Passlock without a chip until 2007, while cars like the Impala had transponders from 2000. Since 2010 most Chevrolets use laser-cut flip keys or proximity fobs.

Chevrolet SSR key replacement
Chevrolet SSR keys are cut and programmed at the vehicle.

Chevrolet SSR key types by model year

The table shows the key most Chevrolet SSR models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.

Typical factory key equipment for the Chevrolet SSR.
Model yearsTypical keyTransponder chipBlade
2003–2006Traditional metal keyNoEdge-cut

Choose your Chevrolet SSR year

Select a model year for the exact key type, programming method and what to expect.

Types of Chevrolet SSR keys

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Chevrolet SSR we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.

How Chevrolet key and immobilizer systems work

General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.

Common Chevrolet key and lock problems

These are the issues we see most often on Chevrolet vehicles:

  • Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
  • Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
  • Flip-key blades that loosen or snap at the hinge
  • Proximity fobs that stop being detected after a battery or module replacement

All keys lost or just need a spare?

There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.

Stranded with your Chevrolet right now?

If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.

Getting a Chevrolet SSR key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a Chevrolet SSR, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a Chevrolet SSR key
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Chevrolet key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a Chevrolet SSR key

Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.

Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.

Situations we are called to most often

  • A used car was sold with one worn key and no spare.
  • The ignition will not turn and the key will not come out.
  • A hardware-store copy opens the door but the engine will not start.
  • The key fob went through the washing machine.
  • The dash reads "key not detected" and the start button does nothing.

Why drivers choose Big Daddy

A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Chevrolet car key service
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Chevrolet key

  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.

Choosing a car locksmith you can trust

  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.

Other Chevrolet models

Where we make Chevrolet SSR keys

Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.

Chevrolet SSR key replacement: frequently asked questions

Why is the security light flashing on my Chevrolet and the engine will not start?

The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.

Can a Chevrolet key be programmed without going to the dealer?

Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.

Do you also repair the ignition on a Chevrolet SSR?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Can you unlock my Chevrolet SSR if the keys are inside?

Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.

Can you make a Chevrolet SSR key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

Is a locksmith-made Chevrolet key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

Will my lost Chevrolet SSR key still start the car?

For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.

Can you make a key for a Chevrolet SSR if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

How many keys should I have for my Chevrolet SSR?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

How do I get a price?

Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.

Call Now (562) 550-7206Open 24 hours · mobile locksmith