Quick answer
Big Daddy Car Key Replacement cuts and programs Chevrolet Tracker keys on site across Los Angeles County and Ventura County, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- Chevrolet Tracker
- Model years covered
- 1998–2004
- Service area
- Los Angeles & Ventura County
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your vehicle
- Phone
- (562) 550-7206
On this page
- Chevrolet Tracker keys made and programmed on site
- Chevrolet Tracker key types by model year
- Choose your Chevrolet Tracker year
- Types of Chevrolet Tracker keys
- How Chevrolet key and immobilizer systems work
- Common Chevrolet key and lock problems
- All keys lost or just need a spare?
- Stranded with your Chevrolet right now?
- Getting a Chevrolet Tracker key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Chevrolet key?
- What affects the cost of a Chevrolet Tracker key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Chevrolet key
- Choosing a car locksmith you can trust
- Other Chevrolet models
- Related automotive locksmith services
- Where we make Chevrolet Tracker keys
- Chevrolet Tracker key replacement: frequently asked questions
Chevrolet Tracker keys made and programmed on site
The Chevrolet Tracker was sold in the United States for model years 1998–2004, and its key technology changed along the way. We make keys for every one of those years: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Chevrolet key technology varies widely by model: full-size trucks and SUVs used Passlock without a chip until 2007, while cars like the Impala had transponders from 2000. Since 2010 most Chevrolets use laser-cut flip keys or proximity fobs.

Chevrolet Tracker key types by model year
The table shows the key most Chevrolet Tracker models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.
| Model years | Typical key | Transponder chip | Blade |
|---|---|---|---|
| 1998–2004 | Traditional metal key | No | Edge-cut |
Choose your Chevrolet Tracker year
Select a model year for the exact key type, programming method and what to expect.
- 2004 Chevrolet Tracker
- 2003 Chevrolet Tracker
- 2002 Chevrolet Tracker
- 2001 Chevrolet Tracker
- 2000 Chevrolet Tracker
- 1999 Chevrolet Tracker
- 1998 Chevrolet Tracker
Types of Chevrolet Tracker keys
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Chevrolet Tracker we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.
How Chevrolet key and immobilizer systems work
General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.
Common Chevrolet key and lock problems
These are the issues we see most often on Chevrolet vehicles:
- Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
- Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
- Flip-key blades that loosen or snap at the hinge
- Proximity fobs that stop being detected after a battery or module replacement
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Chevrolet right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a Chevrolet Tracker key made, step by step
Call with the year, make and model
Tell us you need a key for a Chevrolet Tracker, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Chevrolet key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a Chevrolet Tracker key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- The key fob went through the washing machine.
- The key is locked in the trunk and the trunk release is disabled.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- A hardware-store copy opens the door but the engine will not start.
Why drivers choose Big Daddy
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County and Ventura County.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Looking after your Chevrolet key
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
Choosing a car locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Other Chevrolet models
- Chevrolet Corvette keys
- Chevrolet Suburban keys
- Chevrolet Tahoe keys
- Chevrolet Express keys
- Chevrolet Malibu keys
- Chevrolet Camaro keys
- Chevrolet Silverado 1500 keys
- Chevrolet Silverado 2500HD keys
- Chevrolet Blazer keys
- Chevrolet Impala keys
- Chevrolet Equinox keys
- Chevrolet Colorado keys
- Chevrolet Traverse keys
- Chevrolet Astro keys
Related automotive locksmith services
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Spare Car Key
Creating duplicate or backup keys.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
Where we make Chevrolet Tracker keys
Big Daddy Car Key Replacement is a mobile service covering 140 communities across Los Angeles County and Ventura County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- Chevrolet Tracker keys in Simi Valley
- Chevrolet Tracker keys in Vernon
- Chevrolet Tracker keys in Hacienda Heights
- Chevrolet Tracker keys in San Marino
- Chevrolet Tracker keys in Baldwin Park
- Chevrolet Tracker keys in Thousand Oaks
- Chevrolet Tracker keys in Inglewood
- Chevrolet Tracker keys in View Park–Windsor Hills
- Chevrolet Tracker keys in Artesia
- Chevrolet Tracker keys in Signal Hill
- Chevrolet Tracker keys in Sun Valley
- Chevrolet Tracker keys in Calabasas
- Chevrolet Tracker keys in South Pasadena
- Chevrolet Tracker keys in Hidden Hills
- Chevrolet Tracker keys in Winnetka
- Chevrolet Tracker keys in Long Beach
- Chevrolet Tracker keys in Hermosa Beach
- Chevrolet Tracker keys in Tarzana
- Chevrolet Tracker keys in Commerce
- Chevrolet Tracker keys in Avalon
- Chevrolet Tracker keys in Altadena
- Chevrolet Tracker keys in Hawaiian Gardens
- Chevrolet Tracker keys in Ventura
- Chevrolet Tracker keys in Westmont
Chevrolet Tracker key replacement: frequently asked questions
Why is the security light flashing on my Chevrolet and the engine will not start?
The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.
Can a Chevrolet key be programmed without going to the dealer?
Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.
What do you need from me to make a Chevrolet Tracker key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Will my lost Chevrolet Tracker key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
How many keys should I have for my Chevrolet Tracker?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Can you program a key I bought online for my Chevrolet Tracker?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
How much does a Chevrolet Tracker key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Can you unlock my Chevrolet Tracker if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Is a locksmith-made Chevrolet key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
