Quick answer
Big Daddy Car Key Replacement cuts and programs Chevrolet Venture keys on site across Los Angeles County, Ventura County and the Anaheim area of Orange County, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- Chevrolet Venture
- Model years covered
- 1997–2005
- Service area
- Los Angeles, Ventura & Orange County
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your vehicle
- Phone
- (562) 550-7206
On this page
- Chevrolet Venture keys made and programmed on site
- Chevrolet Venture key types by model year
- Choose your Chevrolet Venture year
- Types of Chevrolet Venture keys
- How Chevrolet key and immobilizer systems work
- Common Chevrolet key and lock problems
- All keys lost or just need a spare?
- Stranded with your Chevrolet right now?
- Getting a Chevrolet Venture key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Chevrolet key?
- What affects the cost of a Chevrolet Venture key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Chevrolet key
- Choosing a car locksmith you can trust
- Other Chevrolet models
- Related automotive locksmith services
- Where we make Chevrolet Venture keys
- Chevrolet Venture key replacement: frequently asked questions
Chevrolet Venture keys made and programmed on site
The Chevrolet Venture was sold in the United States for model years 1997–2005, and its key technology changed along the way. We make keys for every one of those years: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Chevrolet key technology varies widely by model: full-size trucks and SUVs used Passlock without a chip until 2007, while cars like the Impala had transponders from 2000. Since 2010 most Chevrolets use laser-cut flip keys or proximity fobs.

Chevrolet Venture key types by model year
The table shows the key most Chevrolet Venture models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.
| Model years | Typical key | Transponder chip | Blade |
|---|---|---|---|
| 1997–2005 | Traditional metal key | No | Edge-cut |
Choose your Chevrolet Venture year
Select a model year for the exact key type, programming method and what to expect.
- 2005 Chevrolet Venture
- 2004 Chevrolet Venture
- 2003 Chevrolet Venture
- 2002 Chevrolet Venture
- 2001 Chevrolet Venture
- 2000 Chevrolet Venture
- 1999 Chevrolet Venture
- 1998 Chevrolet Venture
- 1997 Chevrolet Venture
Types of Chevrolet Venture keys
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Chevrolet Venture we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.
How Chevrolet key and immobilizer systems work
General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.
Common Chevrolet key and lock problems
These are the issues we see most often on Chevrolet vehicles:
- Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
- Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
- Flip-key blades that loosen or snap at the hinge
- Proximity fobs that stop being detected after a battery or module replacement
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Chevrolet right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Getting a Chevrolet Venture key made, step by step
Call with the year, make and model
Tell us you need a key for a Chevrolet Venture, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Chevrolet key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a Chevrolet Venture key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Situations we are called to most often
- The key fob went through the washing machine.
- The ignition will not turn and the key will not come out.
- The key is locked in the trunk and the trunk release is disabled.
- The dash reads "key not detected" and the start button does nothing.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers choose Big Daddy
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Looking after your Chevrolet key
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
Choosing a car locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
Other Chevrolet models
- Chevrolet Corvette keys
- Chevrolet Suburban keys
- Chevrolet Tahoe keys
- Chevrolet Express keys
- Chevrolet Malibu keys
- Chevrolet Camaro keys
- Chevrolet Silverado 1500 keys
- Chevrolet Silverado 2500HD keys
- Chevrolet Blazer keys
- Chevrolet Impala keys
- Chevrolet Equinox keys
- Chevrolet Colorado keys
- Chevrolet Traverse keys
- Chevrolet Astro keys
Related automotive locksmith services
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
Where we make Chevrolet Venture keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- Chevrolet Venture keys in Fillmore
- Chevrolet Venture keys in Studio City
- Chevrolet Venture keys in Cypress
- Chevrolet Venture keys in Hidden Hills
- Chevrolet Venture keys in Montebello
- Chevrolet Venture keys in Lakewood
- Chevrolet Venture keys in Bell
- Chevrolet Venture keys in Lake View Terrace
- Chevrolet Venture keys in Lawndale
- Chevrolet Venture keys in Downey
- Chevrolet Venture keys in Encino
- Chevrolet Venture keys in El Monte
- Chevrolet Venture keys in Rowland Heights
- Chevrolet Venture keys in Glendale
- Chevrolet Venture keys in East Los Angeles
- Chevrolet Venture keys in Vernon
- Chevrolet Venture keys in Artesia
- Chevrolet Venture keys in North Hollywood
- Chevrolet Venture keys in Whittier
- Chevrolet Venture keys in Stanton
- Chevrolet Venture keys in Bradbury
- Chevrolet Venture keys in Moorpark
- Chevrolet Venture keys in Carson
- Chevrolet Venture keys in Van Nuys
Chevrolet Venture key replacement: frequently asked questions
Why is the security light flashing on my Chevrolet and the engine will not start?
The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.
Can a Chevrolet key be programmed without going to the dealer?
Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.
Can you make a key for a Chevrolet Venture if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Can you program a key I bought online for my Chevrolet Venture?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
How much does a Chevrolet Venture key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Can you unlock my Chevrolet Venture if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
What do you need from me to make a Chevrolet Venture key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
How many keys should I have for my Chevrolet Venture?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Do I have to tow my Chevrolet Venture to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
