Quick answer
Depending on trim, the 2020 Chrysler 300 uses either a smart proximity key with push-button start or a remote head key with a conventional ignition. We confirm which one your vehicle has before cutting anything. Big Daddy Car Key Replacement makes 2020 Chrysler 300 keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2020 Chrysler 300
- Typical key
- Smart proximity key or remote head key, depending on trim
- Transponder chip
- Yes on most; varies by trim
- Blade
- Laser-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2020 Chrysler 300 use?
- How we make a 2020 Chrysler 300 key
- How Chrysler key and immobilizer systems work
- Common Chrysler key and lock problems
- All keys lost or just need a spare?
- Stranded with your Chrysler right now?
- Getting a 2020 Chrysler 300 key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Chrysler key?
- What affects the cost of a 2020 Chrysler 300 key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Chrysler key
- Choosing a car locksmith you can trust
- Other Chrysler 300 years
- Other Chrysler models
- Related automotive locksmith services
- Where we make 2020 Chrysler 300 keys
- 2020 Chrysler 300 key replacement: frequently asked questions
What kind of key does a 2020 Chrysler 300 use?
Depending on trim, the 2020 Chrysler 300 uses either a smart proximity key with push-button start or a remote head key with a conventional ignition. We confirm which one your vehicle has before cutting anything.
Smart proximity key
A smart key never needs to leave your pocket. Antennas in the doors and cabin detect it, the doors unlock when you touch the handle, and the engine starts with a button once the car confirms the key is inside. The key and car exchange encrypted, constantly changing codes. A small metal emergency blade hides inside the fob for the door lock when the fob battery is flat.
Remote head key
A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps.

How we make a 2020 Chrysler 300 key
For the 2020 Chrysler 300 we supply a fob with the exact part number and frequency for the car’s system generation, cut the emergency blade, and program the fob through the diagnostic port using the security access the manufacturer requires. On many vehicles all keys are registered in one session, so bring every key you want to keep. Most smart keys take 30 to 60 minutes including programming. Vehicles that need server authorization or have all keys lost can take longer.
This page covers the 2020 model year. For other years, see the Chrysler 300 key replacement overview, or browse all Chrysler models.
How Chrysler key and immobilizer systems work
Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.
Chrysler introduced the Sentry Key immobilizer in the late 1990s and the Fobik pod key in 2008, followed by Keyless Enter-N-Go proximity fobs. Vehicles from 2018 onward have a secure gateway that needs authorized access for programming.
Common Chrysler key and lock problems
These are the issues we see most often on Chrysler vehicles:
- Fobik keys that are not recognized because of a worn wireless ignition node
- "Key not detected" messages on push-button models with a weak fob battery
- Lost keys on vehicles protected by the secure gateway, which defeats generic tools
- Worn door and ignition wafers on older Wranglers and Cherokees
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Chrysler right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Getting a 2020 Chrysler 300 key made, step by step
Call with the year, make and model
Tell us you need a key for a 2020 Chrysler 300, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Chrysler key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2020 Chrysler 300 key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Smart keys are the most expensive type because of the fob itself and the secured programming. The model year, the system generation, and whether any working key remains all affect the price. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Situations we are called to most often
- The key is locked in the trunk and the trunk release is disabled.
- The dash reads "key not detected" and the start button does nothing.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- A used car was sold with one worn key and no spare.
- The ignition will not turn and the key will not come out.
Why drivers choose Big Daddy
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Looking after your Chrysler key
When the dash warns that the key battery is low, replace the coin cell promptly. If it dies, hold the fob against the start button or in the marked backup spot to start the car.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
Choosing a car locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Other Chrysler 300 years
- 2023 300
- 2022 300
- 2021 300
- 2019 300
- 2018 300
- 2017 300
- 2016 300
- 2015 300
- 2014 300
- 2013 300
- 2012 300
- 2011 300
- 2010 300
- 2009 300
- 2008 300
- 2007 300
- 2006 300
- 2005 300
Other Chrysler models
- Chrysler Town & Country keys
- Chrysler Sebring keys
- Chrysler Pacifica keys
- Chrysler Concorde keys
- Chrysler PT Cruiser keys
- Chrysler Voyager keys
- Chrysler LHS keys
- Chrysler 200 keys
- Chrysler 300M keys
- Chrysler Cirrus keys
- Chrysler Crossfire keys
- Chrysler Aspen keys
Related automotive locksmith services
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Key Fob Programming
Programming new or replacement key fobs.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
Where we make 2020 Chrysler 300 keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 2020 Chrysler 300 keys in Pomona
- 2020 Chrysler 300 keys in Ladera Heights
- 2020 Chrysler 300 keys in Rolling Hills Estates
- 2020 Chrysler 300 keys in View Park–Windsor Hills
- 2020 Chrysler 300 keys in Studio City
- 2020 Chrysler 300 keys in Lynwood
- 2020 Chrysler 300 keys in Garden Grove
- 2020 Chrysler 300 keys in Rowland Heights
- 2020 Chrysler 300 keys in Gardena
- 2020 Chrysler 300 keys in Granada Hills
- 2020 Chrysler 300 keys in Stevenson Ranch
- 2020 Chrysler 300 keys in Baldwin Park
- 2020 Chrysler 300 keys in Calabasas
- 2020 Chrysler 300 keys in Maywood
- 2020 Chrysler 300 keys in Norwalk
- 2020 Chrysler 300 keys in North Hollywood
- 2020 Chrysler 300 keys in Reseda
- 2020 Chrysler 300 keys in Malibu
- 2020 Chrysler 300 keys in Paramount
- 2020 Chrysler 300 keys in Toluca Lake
- 2020 Chrysler 300 keys in Buena Park
- 2020 Chrysler 300 keys in Claremont
- 2020 Chrysler 300 keys in Rancho Palos Verdes
- 2020 Chrysler 300 keys in Walnut
2020 Chrysler 300 key replacement: frequently asked questions
How do I start my 2020 Chrysler 300 if the smart key battery is dead?
Use the emergency blade to open the door, then hold the fob directly against the start button, or place it in the backup slot if your model has one, and press the button. The car reads the chip at close range without battery power.
Can a locksmith program a smart key for a 2020 Chrysler 300?
In most cases, yes, at your location. A small number of late-model systems are restricted to dealer-supplied keys. Call (562) 550-7206 with your VIN and we will tell you which applies.
Can a used smart key from another Chrysler be programmed to my car?
Often not directly. Many smart keys lock to the first vehicle they are programmed to. Some can be reset with special equipment and some cannot be reused at all, so we check before you pay for programming.
Do I need a PIN code to program a Chrysler key?
Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.
Can you program keys for a 2018 or newer Chrysler with the secure gateway?
Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.
Does car insurance cover a replacement Chrysler key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
How many keys should I have for my 2020 Chrysler 300?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Do you also repair the ignition on a 2020 Chrysler 300?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
What do you need from me to make a 2020 Chrysler 300 key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Do I have to tow my 2020 Chrysler 300 to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
