Quick answer
The 1998 Chrysler LHS typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1998 Chrysler LHS keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1998 Chrysler LHS
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1998 Chrysler LHS use?
- How we make a 1998 Chrysler LHS key
- How Chrysler key and immobilizer systems work
- Common Chrysler key and lock problems
- All keys lost or just need a spare?
- Stranded with your Chrysler right now?
- Getting a 1998 Chrysler LHS key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Chrysler key?
- What affects the cost of a 1998 Chrysler LHS key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Chrysler key
- Choosing a car locksmith you can trust
- Other Chrysler LHS years
- Other Chrysler models
- Related automotive locksmith services
- Where we make 1998 Chrysler LHS keys
- 1998 Chrysler LHS key replacement: frequently asked questions
What kind of key does a 1998 Chrysler LHS use?
The 1998 Chrysler LHS typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1998 Chrysler LHS key
For the 1998 Chrysler LHS we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1998 model year. For other years, see the Chrysler LHS key replacement overview, or browse all Chrysler models.
How Chrysler key and immobilizer systems work
Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.
Chrysler introduced the Sentry Key immobilizer in the late 1990s and the Fobik pod key in 2008, followed by Keyless Enter-N-Go proximity fobs. Vehicles from 2018 onward have a secure gateway that needs authorized access for programming.
Common Chrysler key and lock problems
These are the issues we see most often on Chrysler vehicles:
- Fobik keys that are not recognized because of a worn wireless ignition node
- "Key not detected" messages on push-button models with a weak fob battery
- Lost keys on vehicles protected by the secure gateway, which defeats generic tools
- Worn door and ignition wafers on older Wranglers and Cherokees
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Chrysler right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a 1998 Chrysler LHS key made, step by step
Call with the year, make and model
Tell us you need a key for a 1998 Chrysler LHS, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Chrysler key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1998 Chrysler LHS key
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Situations we are called to most often
- The key fob went through the washing machine.
- A used car was sold with one worn key and no spare.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- A hardware-store copy opens the door but the engine will not start.
- The dash reads "key not detected" and the start button does nothing.
Why drivers choose Big Daddy
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.

Looking after your Chrysler key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
Choosing a car locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
Other Chrysler LHS years
Other Chrysler models
- Chrysler Town & Country keys
- Chrysler 300 keys
- Chrysler Sebring keys
- Chrysler Pacifica keys
- Chrysler Concorde keys
- Chrysler PT Cruiser keys
- Chrysler Voyager keys
- Chrysler 200 keys
- Chrysler 300M keys
- Chrysler Cirrus keys
- Chrysler Crossfire keys
- Chrysler Aspen keys
Related automotive locksmith services
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
Where we make 1998 Chrysler LHS keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 1998 Chrysler LHS keys in Azusa
- 1998 Chrysler LHS keys in West Hollywood
- 1998 Chrysler LHS keys in Lomita
- 1998 Chrysler LHS keys in Canoga Park
- 1998 Chrysler LHS keys in La Puente
- 1998 Chrysler LHS keys in Garden Grove
- 1998 Chrysler LHS keys in Encino
- 1998 Chrysler LHS keys in Bradbury
- 1998 Chrysler LHS keys in Port Hueneme
- 1998 Chrysler LHS keys in Gardena
- 1998 Chrysler LHS keys in Hawthorne
- 1998 Chrysler LHS keys in Norwalk
- 1998 Chrysler LHS keys in Hawaiian Gardens
- 1998 Chrysler LHS keys in Lynwood
- 1998 Chrysler LHS keys in Tarzana
- 1998 Chrysler LHS keys in Glendora
- 1998 Chrysler LHS keys in Ventura
- 1998 Chrysler LHS keys in Simi Valley
- 1998 Chrysler LHS keys in Rolling Hills Estates
- 1998 Chrysler LHS keys in Toluca Lake
- 1998 Chrysler LHS keys in Covina
- 1998 Chrysler LHS keys in Ladera Heights
- 1998 Chrysler LHS keys in Bell Gardens
- 1998 Chrysler LHS keys in Topanga
1998 Chrysler LHS key replacement: frequently asked questions
Does a 1998 Chrysler LHS key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1998 Chrysler LHS key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Chrysler key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Do I need a PIN code to program a Chrysler key?
Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.
Can you program keys for a 2018 or newer Chrysler with the secure gateway?
Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.
How many keys should I have for my 1998 Chrysler LHS?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Is a locksmith-made Chrysler key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make a key for a 1998 Chrysler LHS if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Can you unlock my 1998 Chrysler LHS if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Can you program a key I bought online for my 1998 Chrysler LHS?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
