Quick answer
The 1998 Chrysler Sebring typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1998 Chrysler Sebring keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1998 Chrysler Sebring
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1998 Chrysler Sebring use?
- How we make a 1998 Chrysler Sebring key
- How Chrysler key and immobilizer systems work
- Common Chrysler key and lock problems
- All keys lost or just need a spare?
- Stranded with your Chrysler right now?
- Getting a 1998 Chrysler Sebring key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Chrysler key?
- What affects the cost of a 1998 Chrysler Sebring key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Chrysler key
- Choosing a car locksmith you can trust
- Other Chrysler Sebring years
- Other Chrysler models
- Related automotive locksmith services
- Where we make 1998 Chrysler Sebring keys
- 1998 Chrysler Sebring key replacement: frequently asked questions
What kind of key does a 1998 Chrysler Sebring use?
The 1998 Chrysler Sebring typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1998 Chrysler Sebring key
For the 1998 Chrysler Sebring we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1998 model year. For other years, see the Chrysler Sebring key replacement overview, or browse all Chrysler models.
How Chrysler key and immobilizer systems work
Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.
Chrysler introduced the Sentry Key immobilizer in the late 1990s and the Fobik pod key in 2008, followed by Keyless Enter-N-Go proximity fobs. Vehicles from 2018 onward have a secure gateway that needs authorized access for programming.
Common Chrysler key and lock problems
These are the issues we see most often on Chrysler vehicles:
- Fobik keys that are not recognized because of a worn wireless ignition node
- "Key not detected" messages on push-button models with a weak fob battery
- Lost keys on vehicles protected by the secure gateway, which defeats generic tools
- Worn door and ignition wafers on older Wranglers and Cherokees
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Chrysler right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Getting a 1998 Chrysler Sebring key made, step by step
Call with the year, make and model
Tell us you need a key for a 1998 Chrysler Sebring, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Chrysler key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1998 Chrysler Sebring key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- A used car was sold with one worn key and no spare.
- A hardware-store copy opens the door but the engine will not start.
- The dash reads "key not detected" and the start button does nothing.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers choose Big Daddy
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Looking after your Chrysler key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
Choosing a car locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Other Chrysler Sebring years
- 2010 Sebring
- 2009 Sebring
- 2008 Sebring
- 2007 Sebring
- 2006 Sebring
- 2005 Sebring
- 2004 Sebring
- 2003 Sebring
- 2002 Sebring
- 2001 Sebring
- 2000 Sebring
- 1999 Sebring
- 1997 Sebring
- 1996 Sebring
- 1995 Sebring
Other Chrysler models
- Chrysler Town & Country keys
- Chrysler 300 keys
- Chrysler Pacifica keys
- Chrysler Concorde keys
- Chrysler PT Cruiser keys
- Chrysler Voyager keys
- Chrysler LHS keys
- Chrysler 200 keys
- Chrysler 300M keys
- Chrysler Cirrus keys
- Chrysler Crossfire keys
- Chrysler Aspen keys
Related automotive locksmith services
- Motorcycle Key Replacement
Replacing lost or broken motorcycle keys.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
Where we make 1998 Chrysler Sebring keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 1998 Chrysler Sebring keys in Paramount
- 1998 Chrysler Sebring keys in Lake View Terrace
- 1998 Chrysler Sebring keys in Redondo Beach
- 1998 Chrysler Sebring keys in La Verne
- 1998 Chrysler Sebring keys in Pomona
- 1998 Chrysler Sebring keys in Lomita
- 1998 Chrysler Sebring keys in Rosemead
- 1998 Chrysler Sebring keys in Buena Park
- 1998 Chrysler Sebring keys in Westmont
- 1998 Chrysler Sebring keys in Hidden Hills
- 1998 Chrysler Sebring keys in View Park–Windsor Hills
- 1998 Chrysler Sebring keys in Whittier
- 1998 Chrysler Sebring keys in Glendale
- 1998 Chrysler Sebring keys in Pico Rivera
- 1998 Chrysler Sebring keys in West Carson
- 1998 Chrysler Sebring keys in North Hills
- 1998 Chrysler Sebring keys in Rolling Hills
- 1998 Chrysler Sebring keys in Fullerton
- 1998 Chrysler Sebring keys in West Hollywood
- 1998 Chrysler Sebring keys in South Pasadena
- 1998 Chrysler Sebring keys in City of Industry
- 1998 Chrysler Sebring keys in Anaheim
- 1998 Chrysler Sebring keys in Studio City
- 1998 Chrysler Sebring keys in South Gate
1998 Chrysler Sebring key replacement: frequently asked questions
Does a 1998 Chrysler Sebring key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1998 Chrysler Sebring key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Chrysler key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Do I need a PIN code to program a Chrysler key?
Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.
Can you program keys for a 2018 or newer Chrysler with the secure gateway?
Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.
Do I have to tow my 1998 Chrysler Sebring to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Do you also repair the ignition on a 1998 Chrysler Sebring?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Can you make a 1998 Chrysler Sebring key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Is a locksmith-made Chrysler key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make a key for a 1998 Chrysler Sebring if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
