Quick answer
The 2000 Dodge Durango typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 2000 Dodge Durango keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2000 Dodge Durango
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2000 Dodge Durango use?
- How we make a 2000 Dodge Durango key
- How Dodge key and immobilizer systems work
- Common Dodge key and lock problems
- All keys lost or just need a spare?
- Stranded with your Dodge right now?
- Getting a 2000 Dodge Durango key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Dodge key?
- What affects the cost of a 2000 Dodge Durango key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Dodge key
- Choosing a car locksmith you can trust
- Other Dodge Durango years
- Other Dodge models
- Related automotive locksmith services
- Where we make 2000 Dodge Durango keys
- 2000 Dodge Durango key replacement: frequently asked questions
What kind of key does a 2000 Dodge Durango use?
The 2000 Dodge Durango typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 2000 Dodge Durango key
For the 2000 Dodge Durango we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 2000 model year. For other years, see the Dodge Durango key replacement overview, or browse all Dodge models.
How Dodge key and immobilizer systems work
Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.
Dodge keys progressed from plain metal keys to Sentry Key transponders, then Fobik pod keys in 2008, and proximity fobs on performance and family models from 2011. Charger and Challenger theft has made correct, secure programming especially important.
Common Dodge key and lock problems
These are the issues we see most often on Dodge vehicles:
- Fobik keys that are not recognized because of a worn wireless ignition node
- "Key not detected" messages on push-button models with a weak fob battery
- Lost keys on vehicles protected by the secure gateway, which defeats generic tools
- Worn door and ignition wafers on older Wranglers and Cherokees
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Dodge right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Getting a 2000 Dodge Durango key made, step by step
Call with the year, make and model
Tell us you need a key for a 2000 Dodge Durango, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Dodge key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2000 Dodge Durango key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Situations we are called to most often
- The dash reads "key not detected" and the start button does nothing.
- The ignition will not turn and the key will not come out.
- The key fob went through the washing machine.
- The key is locked in the trunk and the trunk release is disabled.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Looking after your Dodge key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
Choosing a car locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Other Dodge Durango years
- 2026 Durango
- 2025 Durango
- 2024 Durango
- 2023 Durango
- 2022 Durango
- 2021 Durango
- 2020 Durango
- 2019 Durango
- 2018 Durango
- 2017 Durango
- 2016 Durango
- 2015 Durango
- 2014 Durango
- 2013 Durango
- 2012 Durango
- 2011 Durango
- 2010 Durango
- 2009 Durango
- 2008 Durango
- 2007 Durango
- 2006 Durango
- 2005 Durango
- 2004 Durango
- 2003 Durango
- 2002 Durango
- 2001 Durango
- 1999 Durango
- 1998 Durango
Other Dodge models
- Dodge Grand Caravan keys
- Dodge Viper keys
- Dodge Dakota keys
- Dodge Charger keys
- Dodge Caravan keys
- Dodge Ram 1500 keys
- Dodge Ram 2500 keys
- Dodge Challenger keys
- Dodge Avenger keys
- Dodge Intrepid keys
- Dodge Journey keys
- Dodge Stratus keys
- Dodge Neon keys
Related automotive locksmith services
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Key Fob Programming
Programming new or replacement key fobs.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
Where we make 2000 Dodge Durango keys
Big Daddy Car Key Replacement is a mobile service covering 140 communities across Los Angeles County and Ventura County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 2000 Dodge Durango keys in Valley Village
- 2000 Dodge Durango keys in Altadena
- 2000 Dodge Durango keys in Pacoima
- 2000 Dodge Durango keys in Bradbury
- 2000 Dodge Durango keys in Santa Clarita
- 2000 Dodge Durango keys in Vernon
- 2000 Dodge Durango keys in Redondo Beach
- 2000 Dodge Durango keys in Covina
- 2000 Dodge Durango keys in Arcadia
- 2000 Dodge Durango keys in Rancho Palos Verdes
- 2000 Dodge Durango keys in Culver City
- 2000 Dodge Durango keys in Ventura
- 2000 Dodge Durango keys in Encino
- 2000 Dodge Durango keys in Rowland Heights
- 2000 Dodge Durango keys in East Los Angeles
- 2000 Dodge Durango keys in Rolling Hills
- 2000 Dodge Durango keys in West Hills
- 2000 Dodge Durango keys in Diamond Bar
- 2000 Dodge Durango keys in Duarte
- 2000 Dodge Durango keys in Inglewood
- 2000 Dodge Durango keys in Studio City
- 2000 Dodge Durango keys in Agua Dulce
- 2000 Dodge Durango keys in Ojai
- 2000 Dodge Durango keys in Malibu
2000 Dodge Durango key replacement: frequently asked questions
Does a 2000 Dodge Durango key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 2000 Dodge Durango key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Dodge key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Do I need a PIN code to program a Dodge key?
Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.
Can you program keys for a 2018 or newer Dodge with the secure gateway?
Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.
How much does a 2000 Dodge Durango key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
How many keys should I have for my 2000 Dodge Durango?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Will my lost 2000 Dodge Durango key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Can you make a key for a 2000 Dodge Durango if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Can you program a key I bought online for my 2000 Dodge Durango?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
