Quick answer
The 2007 Ford E-150 typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 2007 Ford E-150 keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2007 Ford E-150
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2007 Ford E-150 use?
- How we make a 2007 Ford E-150 key
- How Ford key and immobilizer systems work
- Common Ford key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ford right now?
- Getting a 2007 Ford E-150 key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ford key?
- What affects the cost of a 2007 Ford E-150 key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Ford key
- Choosing a car locksmith you can trust
- Other Ford E-150 years
- Other Ford models
- Related automotive locksmith services
- Where we make 2007 Ford E-150 keys
- 2007 Ford E-150 key replacement: frequently asked questions
What kind of key does a 2007 Ford E-150 use?
The 2007 Ford E-150 typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 2007 Ford E-150 key
For the 2007 Ford E-150 we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 2007 model year. For other years, see the Ford E-150 key replacement overview, or browse all Ford models.
How Ford key and immobilizer systems work
Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.
Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.
Common Ford key and lock problems
These are the issues we see most often on Ford vehicles:
- A rapidly flashing theft light and no start after using an unprogrammed copy
- Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
- Remote-head keys whose buttons wear through
- Door keypad codes that owners have forgotten or never learned
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Ford right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a 2007 Ford E-150 key made, step by step
Call with the year, make and model
Tell us you need a key for a 2007 Ford E-150, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ford key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2007 Ford E-150 key
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Situations we are called to most often
- The key fob went through the washing machine.
- A hardware-store copy opens the door but the engine will not start.
- The dash reads "key not detected" and the start button does nothing.
- The ignition will not turn and the key will not come out.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Looking after your Ford key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
Choosing a car locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
Other Ford E-150 years
- 2014 E-150
- 2013 E-150
- 2012 E-150
- 2011 E-150
- 2010 E-150
- 2009 E-150
- 2008 E-150
- 2006 E-150
- 2005 E-150
- 2004 E-150
- 2003 E-150
- 2002 E-150
- 2001 E-150
- 2000 E-150
- 1999 E-150
- 1998 E-150
- 1997 E-150
- 1996 E-150
- 1995 E-150
- 1994 E-150
- 1993 E-150
- 1992 E-150
- 1991 E-150
- 1990 E-150
Other Ford models
- Ford E-350 keys
- Ford F-150 keys
- Ford Mustang keys
- Ford Explorer keys
- Ford Expedition keys
- Ford Ranger keys
- Ford Taurus keys
- Ford F-250 Super Duty keys
- Ford F-350 Super Duty keys
- Ford Escape keys
- Ford E-250 keys
- Ford Crown Victoria keys
- Ford Focus keys
Related automotive locksmith services
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
Where we make 2007 Ford E-150 keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 2007 Ford E-150 keys in Culver City
- 2007 Ford E-150 keys in Santa Fe Springs
- 2007 Ford E-150 keys in Monrovia
- 2007 Ford E-150 keys in Pico Rivera
- 2007 Ford E-150 keys in Buena Park
- 2007 Ford E-150 keys in Rolling Hills
- 2007 Ford E-150 keys in Burbank
- 2007 Ford E-150 keys in Hawaiian Gardens
- 2007 Ford E-150 keys in Port Hueneme
- 2007 Ford E-150 keys in Baldwin Park
- 2007 Ford E-150 keys in North Hills
- 2007 Ford E-150 keys in Whittier
- 2007 Ford E-150 keys in La Cañada Flintridge
- 2007 Ford E-150 keys in Lawndale
- 2007 Ford E-150 keys in Valley Village
- 2007 Ford E-150 keys in North Hollywood
- 2007 Ford E-150 keys in Yorba Linda
- 2007 Ford E-150 keys in Santa Ana
- 2007 Ford E-150 keys in Hidden Hills
- 2007 Ford E-150 keys in Simi Valley
- 2007 Ford E-150 keys in Azusa
- 2007 Ford E-150 keys in La Verne
- 2007 Ford E-150 keys in Camarillo
- 2007 Ford E-150 keys in Porter Ranch
2007 Ford E-150 key replacement: frequently asked questions
Does a 2007 Ford E-150 key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 2007 Ford E-150 key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Ford key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
I have only one Ford key. Can I program a second one myself?
No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.
Why does programming a Ford key take ten minutes of waiting?
PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.
Is a locksmith-made Ford key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Do you also repair the ignition on a 2007 Ford E-150?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Can you make a 2007 Ford E-150 key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Can you program a key I bought online for my 2007 Ford E-150?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Can you unlock my 2007 Ford E-150 if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
