Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

1999 GMC Envoy Key Replacement

Big Daddy Car Key Replacement makes 1999 GMC Envoy keys on site. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
1999 GMC Envoy Key Replacement by Big Daddy Car Key Replacement

Quick answer

The 1999 GMC Envoy typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1999 GMC Envoy keys on site, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
1999 GMC Envoy
Typical key
Traditional metal key
Transponder chip
No
Blade
Edge-cut
Programming
Not normally required
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 1999 GMC Envoy use?

The 1999 GMC Envoy typically uses a traditional edge-cut metal key with no transponder chip.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

1999 GMC Envoy key replacement
Traditional metal key for a 1999 GMC Envoy, made on site.

How we make a 1999 GMC Envoy key

For the 1999 GMC Envoy we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.

This page covers the 1999 model year. For other years, see the GMC Envoy key replacement overview, or browse all GMC models.

How GMC key and immobilizer systems work

General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.

GMC trucks and SUVs used Passlock, with no chip in the key, until the 2007 redesign brought transponder keys. Laser-cut flip keys followed around 2010 on crossovers, and push-button start reached the pickups later.

Common GMC key and lock problems

These are the issues we see most often on GMC vehicles:

  • Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
  • Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
  • Flip-key blades that loosen or snap at the hinge
  • Proximity fobs that stop being detected after a battery or module replacement

All keys lost or just need a spare?

There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.

Stranded with your GMC right now?

If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.

Getting a 1999 GMC Envoy key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 1999 GMC Envoy, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 1999 GMC Envoy key
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a GMC key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 1999 GMC Envoy key

Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.

Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.

Situations we are called to most often

  • The ignition will not turn and the key will not come out.
  • A used car was sold with one worn key and no spare.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • The dash reads "key not detected" and the start button does nothing.
  • A hardware-store copy opens the door but the engine will not start.

Why drivers choose Big Daddy

Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.
GMC car key service
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your GMC key

Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.

  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.

Choosing a car locksmith you can trust

  • Get an itemized receipt showing labor, parts and the business details.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.

Other GMC Envoy years

Other GMC models

Where we make 1999 GMC Envoy keys

Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.

1999 GMC Envoy key replacement: frequently asked questions

Does a 1999 GMC Envoy key need programming?

A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.

Can any hardware store copy my 1999 GMC Envoy key?

If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.

My GMC key turns in the door but not the ignition. Why?

The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.

Why is the security light flashing on my GMC and the engine will not start?

The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.

Can a GMC key be programmed without going to the dealer?

Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.

Can you program a key I bought online for my 1999 GMC Envoy?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

What do you need from me to make a 1999 GMC Envoy key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

Will my lost 1999 GMC Envoy key still start the car?

For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.

Do you also repair the ignition on a 1999 GMC Envoy?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Can you make a key for a 1999 GMC Envoy if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

Which areas do you cover?

We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

Call Now (562) 550-7206Open 24 hours · mobile locksmith