Quick answer
The 2000 Isuzu Rodeo typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 2000 Isuzu Rodeo keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2000 Isuzu Rodeo
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2000 Isuzu Rodeo use?
- How we make a 2000 Isuzu Rodeo key
- How Isuzu key and immobilizer systems work
- Common Isuzu key and lock problems
- All keys lost or just need a spare?
- Stranded with your Isuzu right now?
- Getting a 2000 Isuzu Rodeo key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Isuzu key?
- What affects the cost of a 2000 Isuzu Rodeo key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Isuzu key
- Choosing a car locksmith you can trust
- Other Isuzu Rodeo years
- Other Isuzu models
- Related automotive locksmith services
- Where we make 2000 Isuzu Rodeo keys
- 2000 Isuzu Rodeo key replacement: frequently asked questions
What kind of key does a 2000 Isuzu Rodeo use?
The 2000 Isuzu Rodeo typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 2000 Isuzu Rodeo key
For the 2000 Isuzu Rodeo we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 2000 model year. For other years, see the Isuzu Rodeo key replacement overview, or browse all Isuzu models.
How Isuzu key and immobilizer systems work
Most Isuzu passenger vehicles sold in the United States use mechanical keys without a transponder, and the General Motors-built Ascender and i-Series trucks use GM’s Passlock system. Isuzu N-Series commercial trucks use simple keys that are cut by code, which makes fleet spares straightforward.
Isuzu passenger vehicles sold in the U.S. mostly used straightforward mechanical keys, and the later Ascender and i-Series shared GM’s Passlock system. Isuzu commercial trucks remain common on local roads and use simple keys cut by code.
Common Isuzu key and lock problems
These are the issues we see most often on Isuzu vehicles:
- Worn keys and ignitions on high-mileage Rodeo and Trooper models
- Passlock faults on GM-built models
- Missing spares for commercial N-Series trucks
- Door locks seized from lack of use
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Isuzu right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Getting a 2000 Isuzu Rodeo key made, step by step
Call with the year, make and model
Tell us you need a key for a 2000 Isuzu Rodeo, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Isuzu key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2000 Isuzu Rodeo key
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- The dash reads "key not detected" and the start button does nothing.
- A hardware-store copy opens the door but the engine will not start.
- A used car was sold with one worn key and no spare.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers choose Big Daddy
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your Isuzu key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
Choosing a car locksmith you can trust
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
Other Isuzu Rodeo years
- 2004 Rodeo
- 2003 Rodeo
- 2002 Rodeo
- 2001 Rodeo
- 1999 Rodeo
- 1998 Rodeo
- 1997 Rodeo
- 1996 Rodeo
- 1995 Rodeo
- 1994 Rodeo
- 1993 Rodeo
- 1992 Rodeo
- 1991 Rodeo
Other Isuzu models
- Isuzu NPR keys
- Isuzu Trooper keys
- Isuzu Amigo keys
- Isuzu Ascender keys
- Isuzu Axiom keys
- Isuzu i-Series keys
Related automotive locksmith services
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Spare Car Key
Creating duplicate or backup keys.
Where we make 2000 Isuzu Rodeo keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 2000 Isuzu Rodeo keys in Cudahy
- 2000 Isuzu Rodeo keys in Avalon
- 2000 Isuzu Rodeo keys in Covina
- 2000 Isuzu Rodeo keys in Vernon
- 2000 Isuzu Rodeo keys in Athens
- 2000 Isuzu Rodeo keys in Santa Clarita
- 2000 Isuzu Rodeo keys in Downey
- 2000 Isuzu Rodeo keys in Hawthorne
- 2000 Isuzu Rodeo keys in Culver City
- 2000 Isuzu Rodeo keys in Mission Hills
- 2000 Isuzu Rodeo keys in Encino
- 2000 Isuzu Rodeo keys in Van Nuys
- 2000 Isuzu Rodeo keys in Monterey Park
- 2000 Isuzu Rodeo keys in Norwalk
- 2000 Isuzu Rodeo keys in Hacienda Heights
- 2000 Isuzu Rodeo keys in La Mirada
- 2000 Isuzu Rodeo keys in Ladera Heights
- 2000 Isuzu Rodeo keys in Hawaiian Gardens
- 2000 Isuzu Rodeo keys in Anaheim
- 2000 Isuzu Rodeo keys in Compton
- 2000 Isuzu Rodeo keys in Bell Gardens
- 2000 Isuzu Rodeo keys in Glendale
- 2000 Isuzu Rodeo keys in Toluca Lake
- 2000 Isuzu Rodeo keys in La Cañada Flintridge
2000 Isuzu Rodeo key replacement: frequently asked questions
Does a 2000 Isuzu Rodeo key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 2000 Isuzu Rodeo key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Isuzu key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Does an Isuzu key need programming?
Usually not. Most use a mechanical key that only needs to be cut correctly. GM-built models may need a Passlock relearn after ignition work.
Can you make keys for Isuzu commercial trucks?
Yes. N-Series truck keys are cut by code on site, and we can produce a set of spares for a fleet in one visit.
Can you program a key I bought online for my 2000 Isuzu Rodeo?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Is a locksmith-made Isuzu key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make a key for a 2000 Isuzu Rodeo if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
How much does a 2000 Isuzu Rodeo key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
How many keys should I have for my 2000 Isuzu Rodeo?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
