Quick answer
The 2013 Mazda 5 typically uses a remote head key, which combines a edge-cut blade, a transponder chip and lock and unlock buttons in one unit. Big Daddy Car Key Replacement makes 2013 Mazda 5 keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2013 Mazda 5
- Typical key
- Remote head key
- Transponder chip
- Yes
- Blade
- Edge-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2013 Mazda 5 use?
- How we make a 2013 Mazda 5 key
- How Mazda key and immobilizer systems work
- Common Mazda key and lock problems
- All keys lost or just need a spare?
- Stranded with your Mazda right now?
- Getting a 2013 Mazda 5 key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Mazda key?
- What affects the cost of a 2013 Mazda 5 key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Mazda key
- Choosing a car locksmith you can trust
- Other Mazda 5 years
- Other Mazda models
- Related automotive locksmith services
- Where we make 2013 Mazda 5 keys
- 2013 Mazda 5 key replacement: frequently asked questions
What kind of key does a 2013 Mazda 5 use?
The 2013 Mazda 5 typically uses a remote head key, which combines a edge-cut blade, a transponder chip and lock and unlock buttons in one unit.
Remote head key
A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps.

How we make a 2013 Mazda 5 key
For the 2013 Mazda 5 we match the remote by its frequency and part number, cut the blade to code, program the transponder so the engine starts, and then pair the remote buttons. If your old key’s electronics still work and only the shell or blade is broken, moving them into a new case is a cheaper repair. Expect 20 to 40 minutes for most remote head keys with the vehicle present, and somewhat longer when all keys are lost.
This page covers the 2013 model year. For other years, see the Mazda 5 key replacement overview, or browse all Mazda models.
How Mazda key and immobilizer systems work
Mazda’s immobilizer registers each transponder in the powertrain control module or instrument cluster. Models with two working keys often allow a third to be added by an ignition sequence; otherwise a diagnostic tool is used. Advanced Keyless and push-button systems are programmed through the diagnostic port, and all keys are usually registered together.
Mazda added immobilizers around 2000 and Advanced Keyless Entry in the mid-2000s. Since 2013 most Mazdas have push-button start, even where the fob still looks like a conventional remote.
Common Mazda key and lock problems
These are the issues we see most often on Mazda vehicles:
- Flip keys that crack at the hinge
- Push-button models that do not detect a fob with a weak battery
- Ford-era Mazda trucks and SUVs that follow Ford’s two-key rule
- Card-style advanced keys with worn buttons
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Mazda right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a 2013 Mazda 5 key made, step by step
Call with the year, make and model
Tell us you need a key for a 2013 Mazda 5, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Mazda key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2013 Mazda 5 key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
The remote itself is the main cost, followed by programming. OEM remotes cost more than quality aftermarket ones; we explain the difference and let you choose where both are available. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Situations we are called to most often
- The key fob went through the washing machine.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- A used car was sold with one worn key and no spare.
- The key is locked in the trunk and the trunk release is disabled.
- A hardware-store copy opens the door but the engine will not start.
Why drivers choose Big Daddy
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County and Ventura County.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Looking after your Mazda key
Buttons fail before anything else. A silicone cover and a light keychain extend the life of the key, and a worn rubber pad can be replaced before the circuit board is damaged.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
Choosing a car locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Other Mazda 5 years
Other Mazda models
- Mazda Miata keys
- Mazda 3 keys
- Mazda 6 keys
- Mazda CX-9 keys
- Mazda MPV keys
- Mazda B-Series keys
- Mazda CX-5 keys
- Mazda Protege keys
- Mazda 626 keys
- Mazda Tribute keys
- Mazda Millenia keys
- Mazda RX-8 keys
- Mazda CX-30 keys
Related automotive locksmith services
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Motorcycle Key Replacement
Replacing lost or broken motorcycle keys.
Where we make 2013 Mazda 5 keys
Big Daddy Car Key Replacement is a mobile service covering 140 communities across Los Angeles County and Ventura County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 2013 Mazda 5 keys in Palos Verdes Estates
- 2013 Mazda 5 keys in Camarillo
- 2013 Mazda 5 keys in Claremont
- 2013 Mazda 5 keys in West Covina
- 2013 Mazda 5 keys in Pacoima
- 2013 Mazda 5 keys in Rolling Hills Estates
- 2013 Mazda 5 keys in Moorpark
- 2013 Mazda 5 keys in Rowland Heights
- 2013 Mazda 5 keys in Santa Paula
- 2013 Mazda 5 keys in Rolling Hills
- 2013 Mazda 5 keys in Stevenson Ranch
- 2013 Mazda 5 keys in Santa Monica
- 2013 Mazda 5 keys in Malibu
- 2013 Mazda 5 keys in Cerritos
- 2013 Mazda 5 keys in West Hollywood
- 2013 Mazda 5 keys in South Pasadena
- 2013 Mazda 5 keys in Encino
- 2013 Mazda 5 keys in Westlake Village
- 2013 Mazda 5 keys in Manhattan Beach
- 2013 Mazda 5 keys in Mission Hills
- 2013 Mazda 5 keys in Downey
- 2013 Mazda 5 keys in La Mirada
- 2013 Mazda 5 keys in Bell
- 2013 Mazda 5 keys in Norwalk
2013 Mazda 5 key replacement: frequently asked questions
The buttons on my 2013 Mazda 5 key stopped working but it still starts the car. What is wrong?
The remote transmitter has failed or its battery is dead, while the separate transponder chip is fine. Try a new battery first. If that does not help, the remote portion needs repair or replacement.
Can you replace only the shell of my Mazda key?
Yes. If the circuit board and chip work, we transfer them into a new shell and cut a new blade, which costs much less than a complete key.
Will an aftermarket remote key work on my 2013 Mazda 5?
A quality aftermarket key with the correct chip and frequency works the same as the original. Very cheap online keys are a gamble; many cannot be programmed at all.
Can I add a Mazda key myself?
On some models, if you already have two programmed keys. With one key or none, a diagnostic tool is required.
How do I start my Mazda with a dead fob battery?
Hold the fob against the start button so the car can read its chip at close range, then press the button with the brake applied.
Can you make a 2013 Mazda 5 key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Can you make a key for a 2013 Mazda 5 if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Is a locksmith-made Mazda key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
How many keys should I have for my 2013 Mazda 5?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
What do you need from me to make a 2013 Mazda 5 key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
