Quick answer
The 1998 Mazda Miata typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1998 Mazda Miata keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1998 Mazda Miata
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1998 Mazda Miata use?
- How we make a 1998 Mazda Miata key
- How Mazda key and immobilizer systems work
- Common Mazda key and lock problems
- All keys lost or just need a spare?
- Stranded with your Mazda right now?
- Getting a 1998 Mazda Miata key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Mazda key?
- What affects the cost of a 1998 Mazda Miata key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Mazda key
- Choosing a car locksmith you can trust
- Other Mazda Miata years
- Other Mazda models
- Related automotive locksmith services
- Where we make 1998 Mazda Miata keys
- 1998 Mazda Miata key replacement: frequently asked questions
What kind of key does a 1998 Mazda Miata use?
The 1998 Mazda Miata typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1998 Mazda Miata key
For the 1998 Mazda Miata we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1998 model year. For other years, see the Mazda Miata key replacement overview, or browse all Mazda models.
How Mazda key and immobilizer systems work
Mazda’s immobilizer registers each transponder in the powertrain control module or instrument cluster. Models with two working keys often allow a third to be added by an ignition sequence; otherwise a diagnostic tool is used. Advanced Keyless and push-button systems are programmed through the diagnostic port, and all keys are usually registered together.
Mazda added immobilizers around 2000 and Advanced Keyless Entry in the mid-2000s. Since 2013 most Mazdas have push-button start, even where the fob still looks like a conventional remote.
Common Mazda key and lock problems
These are the issues we see most often on Mazda vehicles:
- Flip keys that crack at the hinge
- Push-button models that do not detect a fob with a weak battery
- Ford-era Mazda trucks and SUVs that follow Ford’s two-key rule
- Card-style advanced keys with worn buttons
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Mazda right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a 1998 Mazda Miata key made, step by step
Call with the year, make and model
Tell us you need a key for a 1998 Mazda Miata, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Mazda key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1998 Mazda Miata key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Situations we are called to most often
- A hardware-store copy opens the door but the engine will not start.
- The ignition will not turn and the key will not come out.
- The key fob went through the washing machine.
- A used car was sold with one worn key and no spare.
- The dash reads "key not detected" and the start button does nothing.
Why drivers choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Looking after your Mazda key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
Choosing a car locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Other Mazda Miata years
- 2026 Miata
- 2025 Miata
- 2024 Miata
- 2023 Miata
- 2022 Miata
- 2021 Miata
- 2020 Miata
- 2019 Miata
- 2018 Miata
- 2017 Miata
- 2016 Miata
- 2015 Miata
- 2014 Miata
- 2013 Miata
- 2012 Miata
- 2011 Miata
- 2010 Miata
- 2009 Miata
- 2008 Miata
- 2007 Miata
- 2006 Miata
- 2005 Miata
- 2004 Miata
- 2003 Miata
- 2002 Miata
- 2001 Miata
- 2000 Miata
- 1999 Miata
- 1997 Miata
- 1996 Miata
- 1995 Miata
- 1994 Miata
- 1993 Miata
- 1992 Miata
- 1991 Miata
- 1990 Miata
Other Mazda models
- Mazda 3 keys
- Mazda 6 keys
- Mazda CX-9 keys
- Mazda MPV keys
- Mazda B-Series keys
- Mazda CX-5 keys
- Mazda Protege keys
- Mazda 626 keys
- Mazda Tribute keys
- Mazda 5 keys
- Mazda Millenia keys
- Mazda RX-8 keys
- Mazda CX-30 keys
Related automotive locksmith services
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
Where we make 1998 Mazda Miata keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 1998 Mazda Miata keys in Pasadena
- 1998 Mazda Miata keys in Hawthorne
- 1998 Mazda Miata keys in Gardena
- 1998 Mazda Miata keys in Hacienda Heights
- 1998 Mazda Miata keys in Van Nuys
- 1998 Mazda Miata keys in Rolling Hills
- 1998 Mazda Miata keys in Northridge
- 1998 Mazda Miata keys in Valencia
- 1998 Mazda Miata keys in Sherman Oaks
- 1998 Mazda Miata keys in Paramount
- 1998 Mazda Miata keys in La Cañada Flintridge
- 1998 Mazda Miata keys in La Puente
- 1998 Mazda Miata keys in Santa Fe Springs
- 1998 Mazda Miata keys in Sylmar
- 1998 Mazda Miata keys in Commerce
- 1998 Mazda Miata keys in South Pasadena
- 1998 Mazda Miata keys in Lakewood
- 1998 Mazda Miata keys in Acton
- 1998 Mazda Miata keys in Signal Hill
- 1998 Mazda Miata keys in West Carson
- 1998 Mazda Miata keys in Marina del Rey
- 1998 Mazda Miata keys in Santa Monica
- 1998 Mazda Miata keys in West Hills
- 1998 Mazda Miata keys in Palmdale
1998 Mazda Miata key replacement: frequently asked questions
Does a 1998 Mazda Miata key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1998 Mazda Miata key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Mazda key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Can I add a Mazda key myself?
On some models, if you already have two programmed keys. With one key or none, a diagnostic tool is required.
How do I start my Mazda with a dead fob battery?
Hold the fob against the start button so the car can read its chip at close range, then press the button with the brake applied.
Is a locksmith-made Mazda key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make a key for a 1998 Mazda Miata if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
How much does a 1998 Mazda Miata key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Can you make a 1998 Mazda Miata key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Do you also repair the ignition on a 1998 Mazda Miata?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
