Quick answer
The 2000 Nissan Altima typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 2000 Nissan Altima keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2000 Nissan Altima
- Typical key
- Transponder chip key
- Transponder chip
- Yes on most; varies by trim
- Blade
- Edge-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2000 Nissan Altima use?
- How we make a 2000 Nissan Altima key
- How Nissan key and immobilizer systems work
- Common Nissan key and lock problems
- All keys lost or just need a spare?
- Stranded with your Nissan right now?
- Getting a 2000 Nissan Altima key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Nissan key?
- What affects the cost of a 2000 Nissan Altima key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Nissan key
- Choosing a car locksmith you can trust
- Other Nissan Altima years
- Other Nissan models
- Related automotive locksmith services
- Where we make 2000 Nissan Altima keys
- 2000 Nissan Altima key replacement: frequently asked questions
What kind of key does a 2000 Nissan Altima use?
The 2000 Nissan Altima typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

How we make a 2000 Nissan Altima key
For the 2000 Nissan Altima we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.
This page covers the 2000 model year. For other years, see the Nissan Altima key replacement overview, or browse all Nissan models.
How Nissan key and immobilizer systems work
Nissan and Infiniti use NATS, the Nissan Anti-Theft System, with a transponder registered in the immobilizer or body control module. The Intelligent Key added proximity entry and, from the late 2000s, push-button start. Programming requires a PIN that is calculated from a code read out of the body control module, and newer models use rolling 20-digit codes that need current equipment.
Nissan’s NATS immobilizer spread across the lineup around 2000, and the Intelligent Key followed in the mid-2000s. Every Altima since 2007 has push-button start, making it one of the most common smart-key cars on the road.
Common Nissan key and lock problems
These are the issues we see most often on Nissan vehicles:
- Steering lock (ESCL) failures on some push-button models that prevent starting
- Intelligent Keys that are not detected when the fob battery is weak
- Twist-knob ignitions that will not turn without a recognized key
- Body control module problems that erase programmed keys
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Nissan right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a 2000 Nissan Altima key made, step by step
Call with the year, make and model
Tell us you need a key for a 2000 Nissan Altima, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Nissan key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2000 Nissan Altima key
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Situations we are called to most often
- A hardware-store copy opens the door but the engine will not start.
- The key is locked in the trunk and the trunk release is disabled.
- The key fob went through the washing machine.
- The ignition will not turn and the key will not come out.
- The dash reads "key not detected" and the start button does nothing.
Why drivers choose Big Daddy
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Looking after your Nissan key
The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
Choosing a car locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
Other Nissan Altima years
- 2026 Altima
- 2025 Altima
- 2024 Altima
- 2023 Altima
- 2022 Altima
- 2021 Altima
- 2020 Altima
- 2019 Altima
- 2018 Altima
- 2017 Altima
- 2016 Altima
- 2015 Altima
- 2014 Altima
- 2013 Altima
- 2012 Altima
- 2011 Altima
- 2010 Altima
- 2009 Altima
- 2008 Altima
- 2007 Altima
- 2006 Altima
- 2005 Altima
- 2004 Altima
- 2003 Altima
- 2002 Altima
- 2001 Altima
- 1999 Altima
- 1998 Altima
- 1997 Altima
- 1996 Altima
- 1995 Altima
- 1994 Altima
- 1993 Altima
Other Nissan models
- Nissan Pathfinder keys
- Nissan Sentra keys
- Nissan Maxima keys
- Nissan Frontier keys
- Nissan Quest keys
- Nissan Murano keys
- Nissan Armada keys
- Nissan Titan keys
- Nissan Versa keys
- Nissan Rogue keys
- Nissan GT-R keys
- Nissan Leaf keys
- Nissan Xterra keys
Related automotive locksmith services
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Key Fob Programming
Programming new or replacement key fobs.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
Where we make 2000 Nissan Altima keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 2000 Nissan Altima keys in Cerritos
- 2000 Nissan Altima keys in Temple City
- 2000 Nissan Altima keys in West Hills
- 2000 Nissan Altima keys in Palmdale
- 2000 Nissan Altima keys in City of Industry
- 2000 Nissan Altima keys in South El Monte
- 2000 Nissan Altima keys in Yorba Linda
- 2000 Nissan Altima keys in Pico Rivera
- 2000 Nissan Altima keys in Ventura
- 2000 Nissan Altima keys in San Gabriel
- 2000 Nissan Altima keys in Valley Village
- 2000 Nissan Altima keys in Westmont
- 2000 Nissan Altima keys in Lancaster
- 2000 Nissan Altima keys in North Hollywood
- 2000 Nissan Altima keys in Burbank
- 2000 Nissan Altima keys in Artesia
- 2000 Nissan Altima keys in San Dimas
- 2000 Nissan Altima keys in Inglewood
- 2000 Nissan Altima keys in Covina
- 2000 Nissan Altima keys in Orange
- 2000 Nissan Altima keys in Diamond Bar
- 2000 Nissan Altima keys in Hermosa Beach
- 2000 Nissan Altima keys in Cudahy
- 2000 Nissan Altima keys in Acton
2000 Nissan Altima key replacement: frequently asked questions
Does my 2000 Nissan Altima key have a chip?
Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.
Can I program a 2000 Nissan Altima key myself?
Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.
Why does my Nissan crank but not start with the new copy?
The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.
My Nissan says "No Key Detected". What should I do?
Replace the fob battery, then hold the fob against the start button while pressing it. If the car still does not respond, the fob, the antenna or the steering lock may be at fault, and we can test each.
Do all keys have to be present when programming a Nissan?
Yes on most models. Programming re-registers every key, and any key not present is erased from the system.
Do you also repair the ignition on a 2000 Nissan Altima?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
What do you need from me to make a 2000 Nissan Altima key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Can you make a key for a 2000 Nissan Altima if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
How much does a 2000 Nissan Altima key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
How many keys should I have for my 2000 Nissan Altima?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
