Quick answer
Depending on trim, the 2013 Nissan Quest uses either a smart proximity key with push-button start or a remote head key with a conventional ignition. We confirm which one your vehicle has before cutting anything. Big Daddy Car Key Replacement makes 2013 Nissan Quest keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2013 Nissan Quest
- Typical key
- Smart proximity key or remote head key, depending on trim
- Transponder chip
- Yes on most; varies by trim
- Blade
- Laser-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2013 Nissan Quest use?
- How we make a 2013 Nissan Quest key
- How Nissan key and immobilizer systems work
- Common Nissan key and lock problems
- All keys lost or just need a spare?
- Stranded with your Nissan right now?
- Getting a 2013 Nissan Quest key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Nissan key?
- What affects the cost of a 2013 Nissan Quest key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Nissan key
- Choosing a car locksmith you can trust
- Other Nissan Quest years
- Other Nissan models
- Related automotive locksmith services
- Where we make 2013 Nissan Quest keys
- 2013 Nissan Quest key replacement: frequently asked questions
What kind of key does a 2013 Nissan Quest use?
Depending on trim, the 2013 Nissan Quest uses either a smart proximity key with push-button start or a remote head key with a conventional ignition. We confirm which one your vehicle has before cutting anything.
Smart proximity key
A smart key never needs to leave your pocket. Antennas in the doors and cabin detect it, the doors unlock when you touch the handle, and the engine starts with a button once the car confirms the key is inside. The key and car exchange encrypted, constantly changing codes. A small metal emergency blade hides inside the fob for the door lock when the fob battery is flat.
Remote head key
A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps.

How we make a 2013 Nissan Quest key
For the 2013 Nissan Quest we supply a fob with the exact part number and frequency for the car’s system generation, cut the emergency blade, and program the fob through the diagnostic port using the security access the manufacturer requires. On many vehicles all keys are registered in one session, so bring every key you want to keep. Most smart keys take 30 to 60 minutes including programming. Vehicles that need server authorization or have all keys lost can take longer.
This page covers the 2013 model year. For other years, see the Nissan Quest key replacement overview, or browse all Nissan models.
How Nissan key and immobilizer systems work
Nissan and Infiniti use NATS, the Nissan Anti-Theft System, with a transponder registered in the immobilizer or body control module. The Intelligent Key added proximity entry and, from the late 2000s, push-button start. Programming requires a PIN that is calculated from a code read out of the body control module, and newer models use rolling 20-digit codes that need current equipment.
Nissan’s NATS immobilizer spread across the lineup around 2000, and the Intelligent Key followed in the mid-2000s. Every Altima since 2007 has push-button start, making it one of the most common smart-key cars on the road.
Common Nissan key and lock problems
These are the issues we see most often on Nissan vehicles:
- Steering lock (ESCL) failures on some push-button models that prevent starting
- Intelligent Keys that are not detected when the fob battery is weak
- Twist-knob ignitions that will not turn without a recognized key
- Body control module problems that erase programmed keys
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Nissan right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a 2013 Nissan Quest key made, step by step
Call with the year, make and model
Tell us you need a key for a 2013 Nissan Quest, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Nissan key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2013 Nissan Quest key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Smart keys are the most expensive type because of the fob itself and the secured programming. The model year, the system generation, and whether any working key remains all affect the price. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Situations we are called to most often
- The key fob went through the washing machine.
- The dash reads "key not detected" and the start button does nothing.
- The ignition will not turn and the key will not come out.
- A used car was sold with one worn key and no spare.
- A hardware-store copy opens the door but the engine will not start.
Why drivers choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Looking after your Nissan key
When the dash warns that the key battery is low, replace the coin cell promptly. If it dies, hold the fob against the start button or in the marked backup spot to start the car.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
Choosing a car locksmith you can trust
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Other Nissan Quest years
- 2017 Quest
- 2016 Quest
- 2015 Quest
- 2014 Quest
- 2012 Quest
- 2011 Quest
- 2010 Quest
- 2009 Quest
- 2008 Quest
- 2007 Quest
- 2006 Quest
- 2005 Quest
- 2004 Quest
- 2003 Quest
- 2002 Quest
- 2001 Quest
- 2000 Quest
- 1999 Quest
- 1998 Quest
- 1997 Quest
- 1996 Quest
- 1995 Quest
- 1994 Quest
- 1993 Quest
Other Nissan models
- Nissan Pathfinder keys
- Nissan Sentra keys
- Nissan Altima keys
- Nissan Maxima keys
- Nissan Frontier keys
- Nissan Murano keys
- Nissan Armada keys
- Nissan Titan keys
- Nissan Versa keys
- Nissan Rogue keys
- Nissan GT-R keys
- Nissan Leaf keys
- Nissan Xterra keys
Related automotive locksmith services
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Motorcycle Key Replacement
Replacing lost or broken motorcycle keys.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Key Fob Programming
Programming new or replacement key fobs.
- Car Lockout
Unlocking vehicles when keys are locked inside.
Where we make 2013 Nissan Quest keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 2013 Nissan Quest keys in Toluca Lake
- 2013 Nissan Quest keys in Hawaiian Gardens
- 2013 Nissan Quest keys in Whittier
- 2013 Nissan Quest keys in Monrovia
- 2013 Nissan Quest keys in Palmdale
- 2013 Nissan Quest keys in Altadena
- 2013 Nissan Quest keys in El Monte
- 2013 Nissan Quest keys in Port Hueneme
- 2013 Nissan Quest keys in South El Monte
- 2013 Nissan Quest keys in Fillmore
- 2013 Nissan Quest keys in Alhambra
- 2013 Nissan Quest keys in Walnut
- 2013 Nissan Quest keys in Chatsworth
- 2013 Nissan Quest keys in Panorama City
- 2013 Nissan Quest keys in Burbank
- 2013 Nissan Quest keys in San Dimas
- 2013 Nissan Quest keys in South Gate
- 2013 Nissan Quest keys in Rosemead
- 2013 Nissan Quest keys in Sherman Oaks
- 2013 Nissan Quest keys in Mission Hills
- 2013 Nissan Quest keys in Simi Valley
- 2013 Nissan Quest keys in Hacienda Heights
- 2013 Nissan Quest keys in Downey
- 2013 Nissan Quest keys in Lakewood
2013 Nissan Quest key replacement: frequently asked questions
How do I start my 2013 Nissan Quest if the smart key battery is dead?
Use the emergency blade to open the door, then hold the fob directly against the start button, or place it in the backup slot if your model has one, and press the button. The car reads the chip at close range without battery power.
Can a locksmith program a smart key for a 2013 Nissan Quest?
In most cases, yes, at your location. A small number of late-model systems are restricted to dealer-supplied keys. Call (562) 550-7206 with your VIN and we will tell you which applies.
Can a used smart key from another Nissan be programmed to my car?
Often not directly. Many smart keys lock to the first vehicle they are programmed to. Some can be reset with special equipment and some cannot be reused at all, so we check before you pay for programming.
My Nissan says "No Key Detected". What should I do?
Replace the fob battery, then hold the fob against the start button while pressing it. If the car still does not respond, the fob, the antenna or the steering lock may be at fault, and we can test each.
Do all keys have to be present when programming a Nissan?
Yes on most models. Programming re-registers every key, and any key not present is erased from the system.
Do you also repair the ignition on a 2013 Nissan Quest?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Do I have to tow my 2013 Nissan Quest to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
What do you need from me to make a 2013 Nissan Quest key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
How many keys should I have for my 2013 Nissan Quest?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
How much does a 2013 Nissan Quest key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
