Quick answer
The 1996 Porsche 911 typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1996 Porsche 911 keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1996 Porsche 911
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1996 Porsche 911 use?
- How we make a 1996 Porsche 911 key
- How Porsche key and immobilizer systems work
- Common Porsche key and lock problems
- All keys lost or just need a spare?
- Stranded with your Porsche right now?
- Getting a 1996 Porsche 911 key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Porsche key?
- What affects the cost of a 1996 Porsche 911 key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Porsche key
- Choosing a car locksmith you can trust
- Other Porsche 911 years
- Other Porsche models
- Related automotive locksmith services
- Where we make 1996 Porsche 911 keys
- 1996 Porsche 911 key replacement: frequently asked questions
What kind of key does a 1996 Porsche 911 use?
The 1996 Porsche 911 typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1996 Porsche 911 key
For the 1996 Porsche 911 we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1996 model year. For other years, see the Porsche 911 key replacement overview, or browse all Porsche models.
How Porsche key and immobilizer systems work
Volkswagen, Audi and Porsche use a multi-generation immobilizer that ties the key to the instrument cluster, engine computer and, on later cars, several other modules. Keys are laser-cut and many must be pre-coded to the vehicle before they can be adapted. Older generations are programmed with a PIN; MQB-platform and newer vehicles need online or dealer-level procedures, and some keys are supplied only against the VIN.
Porsche keys are laser-cut with the remote in the head, and newer models use a car-shaped fob that turns in the dash, with Entry & Drive proximity optional. Many late-model Porsche keys are dealer-supplied.
Common Porsche key and lock problems
These are the issues we see most often on Porsche vehicles:
- Flip keys with worn buttons or a broken blade hinge
- An immobilizer warning after cluster or module replacement
- Slot-type fobs that are not read because of a failing ignition switch
- Late-model vehicles whose keys must be dealer-ordered
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Porsche right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a 1996 Porsche 911 key made, step by step
Call with the year, make and model
Tell us you need a key for a 1996 Porsche 911, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Porsche key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1996 Porsche 911 key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Situations we are called to most often
- A hardware-store copy opens the door but the engine will not start.
- The dash reads "key not detected" and the start button does nothing.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key fob went through the washing machine.
- The ignition will not turn and the key will not come out.
Why drivers choose Big Daddy
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Looking after your Porsche key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
Choosing a car locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Other Porsche 911 years
- 2026 911
- 2025 911
- 2024 911
- 2023 911
- 2022 911
- 2021 911
- 2020 911
- 2019 911
- 2018 911
- 2017 911
- 2016 911
- 2015 911
- 2014 911
- 2013 911
- 2012 911
- 2011 911
- 2010 911
- 2009 911
- 2008 911
- 2007 911
- 2006 911
- 2005 911
- 2004 911
- 2003 911
- 2002 911
- 2001 911
- 2000 911
- 1999 911
- 1998 911
- 1997 911
- 1995 911
- 1994 911
- 1993 911
- 1992 911
- 1991 911
- 1990 911
Other Porsche models
- Porsche Boxster keys
- Porsche Cayenne keys
- Porsche Cayman keys
- Porsche Panamera keys
- Porsche Macan keys
- Porsche Taycan keys
Related automotive locksmith services
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
Where we make 1996 Porsche 911 keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 1996 Porsche 911 keys in Cudahy
- 1996 Porsche 911 keys in Buena Park
- 1996 Porsche 911 keys in Studio City
- 1996 Porsche 911 keys in Westlake Village
- 1996 Porsche 911 keys in Monrovia
- 1996 Porsche 911 keys in Norwalk
- 1996 Porsche 911 keys in Sierra Madre
- 1996 Porsche 911 keys in Arleta
- 1996 Porsche 911 keys in Mission Hills
- 1996 Porsche 911 keys in Port Hueneme
- 1996 Porsche 911 keys in South Pasadena
- 1996 Porsche 911 keys in Cerritos
- 1996 Porsche 911 keys in Hawthorne
- 1996 Porsche 911 keys in Orange
- 1996 Porsche 911 keys in View Park–Windsor Hills
- 1996 Porsche 911 keys in Calabasas
- 1996 Porsche 911 keys in North Hollywood
- 1996 Porsche 911 keys in Pacoima
- 1996 Porsche 911 keys in Hawaiian Gardens
- 1996 Porsche 911 keys in Rosemead
- 1996 Porsche 911 keys in Gardena
- 1996 Porsche 911 keys in Porter Ranch
- 1996 Porsche 911 keys in Garden Grove
- 1996 Porsche 911 keys in Hidden Hills
1996 Porsche 911 key replacement: frequently asked questions
Does a 1996 Porsche 911 key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1996 Porsche 911 key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Porsche key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Can every Porsche key be made by a locksmith?
Most can, including many laser-cut flip keys and proximity fobs. Some recent models require a key ordered from the dealer by VIN. Call with your VIN and we will tell you before you spend anything.
Why do Porsche keys cost more than many other brands?
The keys are laser-cut, the electronics are model-specific, and the immobilizer requires specialized equipment and security data to program.
Can you make a 1996 Porsche 911 key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Is a locksmith-made Porsche key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Will my lost 1996 Porsche 911 key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Can you unlock my 1996 Porsche 911 if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Can you make a key for a 1996 Porsche 911 if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
