Quick answer
The 2006 Subaru Baja typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 2006 Subaru Baja keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2006 Subaru Baja
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2006 Subaru Baja use?
- How we make a 2006 Subaru Baja key
- How Subaru key and immobilizer systems work
- Common Subaru key and lock problems
- All keys lost or just need a spare?
- Stranded with your Subaru right now?
- Getting a 2006 Subaru Baja key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Subaru key?
- What affects the cost of a 2006 Subaru Baja key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Subaru key
- Choosing a car locksmith you can trust
- Other Subaru Baja years
- Other Subaru models
- Related automotive locksmith services
- Where we make 2006 Subaru Baja keys
- 2006 Subaru Baja key replacement: frequently asked questions
What kind of key does a 2006 Subaru Baja use?
The 2006 Subaru Baja typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 2006 Subaru Baja key
For the 2006 Subaru Baja we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 2006 model year. For other years, see the Subaru Baja key replacement overview, or browse all Subaru models.
How Subaru key and immobilizer systems work
Subaru introduced transponder immobilizers in the mid-2000s. Keys are registered through the diagnostic port with a security code, and all keys must be present because they are registered together. Later models add remote-head keys and proximity fobs with push-button start, programmed in a similar way.
Subaru introduced immobilizers on the 2005 Legacy and Outback and extended them through the range by 2008. Push-button start arrived on upper trims from 2013 and is now common across the lineup.
Common Subaru key and lock problems
These are the issues we see most often on Subaru vehicles:
- Lost keys on vehicles where every key is registered at once
- Remote-head keys with failed buttons
- Proximity fobs not detected after battery replacement
- Uncertainty about whether older Imprezas and Foresters have a chip
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Subaru right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a 2006 Subaru Baja key made, step by step
Call with the year, make and model
Tell us you need a key for a 2006 Subaru Baja, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Subaru key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2006 Subaru Baja key
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Situations we are called to most often
- The key fob went through the washing machine.
- A used car was sold with one worn key and no spare.
- The ignition will not turn and the key will not come out.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The dash reads "key not detected" and the start button does nothing.
Why drivers choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your Subaru key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
Choosing a car locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Other Subaru Baja years
Other Subaru models
- Subaru Legacy keys
- Subaru Impreza keys
- Subaru Outback keys
- Subaru Forester keys
- Subaru WRX keys
- Subaru BRZ keys
- Subaru Crosstrek keys
- Subaru Tribeca keys
- Subaru Ascent keys
- Subaru Solterra keys
Related automotive locksmith services
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
Where we make 2006 Subaru Baja keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 2006 Subaru Baja keys in View Park–Windsor Hills
- 2006 Subaru Baja keys in Manhattan Beach
- 2006 Subaru Baja keys in Valencia
- 2006 Subaru Baja keys in Santa Fe Springs
- 2006 Subaru Baja keys in Beverly Hills
- 2006 Subaru Baja keys in Tarzana
- 2006 Subaru Baja keys in Van Nuys
- 2006 Subaru Baja keys in Panorama City
- 2006 Subaru Baja keys in Arleta
- 2006 Subaru Baja keys in Pomona
- 2006 Subaru Baja keys in Paramount
- 2006 Subaru Baja keys in Stanton
- 2006 Subaru Baja keys in Canoga Park
- 2006 Subaru Baja keys in Commerce
- 2006 Subaru Baja keys in Santa Monica
- 2006 Subaru Baja keys in Hacienda Heights
- 2006 Subaru Baja keys in Woodland Hills
- 2006 Subaru Baja keys in Moorpark
- 2006 Subaru Baja keys in Torrance
- 2006 Subaru Baja keys in Rowland Heights
- 2006 Subaru Baja keys in Westlake Village
- 2006 Subaru Baja keys in Sierra Madre
- 2006 Subaru Baja keys in Garden Grove
- 2006 Subaru Baja keys in Mission Hills
2006 Subaru Baja key replacement: frequently asked questions
Does a 2006 Subaru Baja key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 2006 Subaru Baja key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Subaru key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Does my older Subaru have a chip key?
Legacy and Outback models have had immobilizers since 2005, and other models followed by about 2008. We check your key and vehicle before cutting.
Do I need to bring all my Subaru keys for programming?
Yes. Keys are registered as a set, and any key not present will stop starting the car.
Can you program a key I bought online for my 2006 Subaru Baja?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Can you make a key for a 2006 Subaru Baja if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Do I have to tow my 2006 Subaru Baja to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
What do you need from me to make a 2006 Subaru Baja key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Do you also repair the ignition on a 2006 Subaru Baja?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
