Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

2001 Subaru Forester Key Replacement

Big Daddy Car Key Replacement makes 2001 Subaru Forester keys on site. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
2001 Subaru Forester Key Replacement by Big Daddy Car Key Replacement

Quick answer

The 2001 Subaru Forester typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 2001 Subaru Forester keys on site, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
2001 Subaru Forester
Typical key
Traditional metal key
Transponder chip
No
Blade
Edge-cut
Programming
Not normally required
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 2001 Subaru Forester use?

The 2001 Subaru Forester typically uses a traditional edge-cut metal key with no transponder chip.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

2001 Subaru Forester key replacement
Traditional metal key for a 2001 Subaru Forester, made on site.

How we make a 2001 Subaru Forester key

For the 2001 Subaru Forester we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.

This page covers the 2001 model year. For other years, see the Subaru Forester key replacement overview, or browse all Subaru models.

How Subaru key and immobilizer systems work

Subaru introduced transponder immobilizers in the mid-2000s. Keys are registered through the diagnostic port with a security code, and all keys must be present because they are registered together. Later models add remote-head keys and proximity fobs with push-button start, programmed in a similar way.

Subaru introduced immobilizers on the 2005 Legacy and Outback and extended them through the range by 2008. Push-button start arrived on upper trims from 2013 and is now common across the lineup.

Common Subaru key and lock problems

These are the issues we see most often on Subaru vehicles:

  • Lost keys on vehicles where every key is registered at once
  • Remote-head keys with failed buttons
  • Proximity fobs not detected after battery replacement
  • Uncertainty about whether older Imprezas and Foresters have a chip

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Subaru right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

Getting a 2001 Subaru Forester key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 2001 Subaru Forester, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 2001 Subaru Forester key
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Subaru key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 2001 Subaru Forester key

Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.

Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.

Situations we are called to most often

  • The dash reads "key not detected" and the start button does nothing.
  • The key fob went through the washing machine.
  • The ignition will not turn and the key will not come out.
  • A hardware-store copy opens the door but the engine will not start.
  • A used car was sold with one worn key and no spare.

Why drivers choose Big Daddy

A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Subaru car key service
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Subaru key

Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.

  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.

Choosing a car locksmith you can trust

  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.

Other Subaru Forester years

Other Subaru models

Where we make 2001 Subaru Forester keys

Big Daddy Car Key Replacement is a mobile service covering 140 communities across Los Angeles County and Ventura County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.

2001 Subaru Forester key replacement: frequently asked questions

Does a 2001 Subaru Forester key need programming?

A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.

Can any hardware store copy my 2001 Subaru Forester key?

If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.

My Subaru key turns in the door but not the ignition. Why?

The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.

Does my older Subaru have a chip key?

Legacy and Outback models have had immobilizers since 2005, and other models followed by about 2008. We check your key and vehicle before cutting.

Do I need to bring all my Subaru keys for programming?

Yes. Keys are registered as a set, and any key not present will stop starting the car.

Can you make a 2001 Subaru Forester key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

Can you unlock my 2001 Subaru Forester if the keys are inside?

Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.

Does car insurance cover a replacement Subaru key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

Do you also repair the ignition on a 2001 Subaru Forester?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

What do you need from me to make a 2001 Subaru Forester key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

Call Now (562) 550-7206Open 24 hours · mobile locksmith