Quick answer
The 1991 Volvo 240 typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1991 Volvo 240 keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1991 Volvo 240
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1991 Volvo 240 use?
- How we make a 1991 Volvo 240 key
- How Volvo key and immobilizer systems work
- Common Volvo key and lock problems
- All keys lost or just need a spare?
- Stranded with your Volvo right now?
- Getting a 1991 Volvo 240 key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Volvo key?
- What affects the cost of a 1991 Volvo 240 key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Volvo key
- Choosing a car locksmith you can trust
- Other Volvo 240 years
- Other Volvo models
- Related automotive locksmith services
- Where we make 1991 Volvo 240 keys
- 1991 Volvo 240 key replacement: frequently asked questions
What kind of key does a 1991 Volvo 240 use?
The 1991 Volvo 240 typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1991 Volvo 240 key
For the 1991 Volvo 240 we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1991 model year. For other years, see the Volvo 240 key replacement overview, or browse all Volvo models.
How Volvo key and immobilizer systems work
Volvo immobilizers store key data in the central electronic module and, on some generations, the key itself is coded by software downloaded from Volvo for that VIN. Earlier flip keys can often be programmed directly. Slot-type remote keys and proximity fobs on later models are more restricted, and a number require dealer software to add a key.
Volvo moved from laser-cut flip keys to dash-slot remote keys in the mid-2000s and to proximity fobs after 2016. Volvo software is tightly controlled, so some models need keys supplied and coded through the dealer network.
Common Volvo key and lock problems
These are the issues we see most often on Volvo vehicles:
- Flip keys with worn buttons or broken blades
- Slot-type remote keys the dash reader no longer recognizes
- "Key error" messages after battery replacement
- Models where additional keys must be coded through Volvo
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Volvo right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
Getting a 1991 Volvo 240 key made, step by step
Call with the year, make and model
Tell us you need a key for a 1991 Volvo 240, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Volvo key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1991 Volvo 240 key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Situations we are called to most often
- A hardware-store copy opens the door but the engine will not start.
- A used car was sold with one worn key and no spare.
- The key fob went through the washing machine.
- The dash reads "key not detected" and the start button does nothing.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers choose Big Daddy
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Los Angeles County, Ventura County and the Anaheim area of Orange County.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Looking after your Volvo key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
Choosing a car locksmith you can trust
- Get an itemized receipt showing labor, parts and the business details.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
Other Volvo 240 years
Other Volvo models
- Volvo S60 keys
- Volvo XC90 keys
- Volvo S80 keys
- Volvo XC60 keys
- Volvo C70 keys
- Volvo XC70 keys
- Volvo V70 keys
- Volvo S40 keys
- Volvo S90 keys
- Volvo V60 keys
- Volvo XC40 keys
- Volvo V50 keys
- Volvo C30 keys
- Volvo 850 keys
Related automotive locksmith services
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Spare Car Key
Creating duplicate or backup keys.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
Where we make 1991 Volvo 240 keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 1991 Volvo 240 keys in Santa Paula
- 1991 Volvo 240 keys in Rosemead
- 1991 Volvo 240 keys in Agoura Hills
- 1991 Volvo 240 keys in Studio City
- 1991 Volvo 240 keys in Porter Ranch
- 1991 Volvo 240 keys in San Marino
- 1991 Volvo 240 keys in Rolling Hills
- 1991 Volvo 240 keys in Port Hueneme
- 1991 Volvo 240 keys in Diamond Bar
- 1991 Volvo 240 keys in North Hollywood
- 1991 Volvo 240 keys in Lakewood
- 1991 Volvo 240 keys in Agua Dulce
- 1991 Volvo 240 keys in Santa Monica
- 1991 Volvo 240 keys in Sierra Madre
- 1991 Volvo 240 keys in Granada Hills
- 1991 Volvo 240 keys in Ojai
- 1991 Volvo 240 keys in Whittier
- 1991 Volvo 240 keys in South Gate
- 1991 Volvo 240 keys in Cerritos
- 1991 Volvo 240 keys in Yorba Linda
- 1991 Volvo 240 keys in Bell Gardens
- 1991 Volvo 240 keys in Huntington Park
- 1991 Volvo 240 keys in Hacienda Heights
- 1991 Volvo 240 keys in Monrovia
1991 Volvo 240 key replacement: frequently asked questions
Does a 1991 Volvo 240 key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1991 Volvo 240 key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Volvo key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Can you make a spare key for my Volvo?
On many models, yes. On others, the key must be coded through Volvo’s software. Tell us the year and model and we will let you know which applies.
Why does my Volvo show a key error?
The car is not reading the key’s transponder, often because of a failing key, a low car battery or a worn reader. We test the key first because it is the simplest fix.
Can you unlock my 1991 Volvo 240 if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
How many keys should I have for my 1991 Volvo 240?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Do you also repair the ignition on a 1991 Volvo 240?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Will my lost 1991 Volvo 240 key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Does car insurance cover a replacement Volvo key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
