Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Hummer Key Replacement in Acton, CA

Need a Hummer key in Acton? We come to you with the key machines and programming equipment, any hour of the day or night.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Hummer Key Replacement in Acton, CA by Big Daddy Car Key Replacement

Quick answer

Big Daddy Car Key Replacement cuts and programs Hummer keys on site in Acton, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.

Last updated

Vehicle
Hummer
Model years covered
1990–2026
Models covered
3
Service area
Acton, CA
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your vehicle
Phone
(562) 550-7206
On this page

Hummer car keys made and programmed on site

Big Daddy Car Key Replacement cuts and programs Hummer keys in Acton for 3 models spanning model years 1990 to 2026. A mobile technician comes to the vehicle, verifies ownership, cuts the key to factory code and programs it to the car. The H2 and H3 share GM truck electronics of their era, so earlier models rely on Passlock and later ones on transponder keys. The military-derived H1 uses simple mechanical keys.

Hummer key replacement in Acton
Hummer keys are cut and programmed at the vehicle in Acton.

Hummer models we make keys for

Choose a model to see its key types by year and a page for every model year.

Types of Hummer keys

Transponder chip key

A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds. For the Hummer we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Hummer we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.

How Hummer key and immobilizer systems work

General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.

Common Hummer key and lock problems

These are the issues we see most often on Hummer vehicles in Acton:

  • Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
  • Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
  • Flip-key blades that loosen or snap at the hinge
  • Proximity fobs that stop being detected after a battery or module replacement

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Hummer right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

Hummer key replacement across Acton

Acton is an unincorporated community in Los Angeles County, part of the Antelope Valley area we cover every day. We cover every part of Acton, including the Crown Valley Road corridor, the Sierra Highway corridor, the Soledad Canyon ranches, and the Santiago Road area. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 93510.

Acton is a high-desert ranch community of horse properties and custom homes on acreage, where gate locks, outbuilding locks and keys for trucks and trailers are typical requests.

People call us from all over Acton, including the areas around the Vincent Grade/Acton Metrolink station, Acton Park, the Shambala Preserve, and the historic 49er Saloon. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Acton follows SR-14, Sierra Highway, Crown Valley Road, Soledad Canyon Road, Escondido Canyon Road, and Santiago Road. You get a realistic arrival estimate when you call.

Getting a Hummer key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a Hummer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a Hummer key in Acton
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Hummer key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a Hummer key

Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.

Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.

Situations we are called to most often

  • The key fob went through the washing machine.
  • The key is locked in the trunk and the trunk release is disabled.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • The dash reads "key not detected" and the start button does nothing.
  • A used car was sold with one worn key and no spare.

Why drivers in Acton choose Big Daddy

Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Hummer car key service in Acton
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Hummer key

  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.

Choosing a car locksmith you can trust

  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Get an itemized receipt showing labor, parts and the business details.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.

Other makes

Hummer keys near Acton

We make Hummer keys in the communities around Acton as well. See the main Hummer key replacement page or the Acton locksmith page.

Hummer key replacement in Acton: frequently asked questions

Why is the security light flashing on my Hummer and the engine will not start?

The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.

Can a Hummer key be programmed without going to the dealer?

Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.

Can you make a Hummer key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

Do I have to tow my Hummer to you?

No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.

Will my lost Hummer key still start the car?

For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.

Does car insurance cover a replacement Hummer key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

Do you also repair the ignition on a Hummer?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Can you make a key for a Hummer if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

How many keys should I have for my Hummer?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Which parts of Acton do you serve?

All of Acton, including the Crown Valley Road corridor, the Sierra Highway corridor, the Soledad Canyon ranches, and the Santiago Road area, and addresses in ZIP code 93510.

Are you open 24 hours in Acton?

Yes. We take calls and dispatch to Acton 24 hours a day, including weekends and holidays.

Do you only make car keys?

No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Call Now (562) 550-7206Open 24 hours · mobile locksmith