Quick answer
Key Cutting by Code: Cutting keys using a manufacturer key code when available. Big Daddy Car Key Replacement provides key cutting by code service in Alhambra as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Key Cutting by Code
- Area
- Alhambra, Los Angeles County, CA (91801, 91803)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Key Services
- Phone
- (562) 550-7206
On this page
- About our key cutting by code service
- Who we help in Alhambra
- When you need key cutting by code service
- Key Cutting by Code across Alhambra
- Our key cutting by code process, step by step
- Situations we handle regularly
- Tools, parts and hardware we carry
- Terms worth knowing
- What affects the cost of key cutting by code service
- What you can expect from us
- Advice worth knowing
- Professional service compared with doing it yourself
- What we commit to
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in Alhambra
- Key Cutting by Code near Alhambra
- Key Cutting by Code in Alhambra: frequently asked questions
About our key cutting by code service
Cutting keys using a manufacturer key code when available. Every key is defined by a series of cut depths. Given those depths, from a code stamped on a lock or key, a manufacturer record or a decoded cylinder, a code machine cuts a key to original factory dimensions. The result works better than any copy because it carries no accumulated wear.

Whether you need one spare or a set for a whole building, our key cutting by code service in Alhambra comes to you. Keys are cut in the van and tested in the actual lock before we leave, which is the only real proof that a key is right.
Who we help in Alhambra
Key work in Alhambra serves homeowners who need spares for family, landlords handing keys to new tenants, businesses issuing keys to staff, property managers replacing mailbox and common-area keys, and anyone with a cabinet, padlock or old lock whose key has gone missing.
This service is part of our key services in Alhambra.
When you need key cutting by code service
If any of the following sounds familiar, key cutting by code service is likely what you need:
- You have a key code but no key
- Your key is too worn to copy accurately
- You need a key for a lock with a stamped code
- A vehicle or cabinet key must be made from records
Key Cutting by Code across Alhambra
Located in Los Angeles County, Alhambra is an incorporated city within our San Gabriel Valley service area. We cover every part of Alhambra, including Downtown Alhambra, the Bean Tract, Emery Park, the Valley Boulevard corridor, and the Midwick Tract. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91801 and 91803 ZIP codes.
Alhambra is a gateway to the San Gabriel Valley with 1920s bungalows, newer condos and a long auto row on Main Street, bringing a mix of antique hardware and late-model car key work.
If you are out and about near Main Street Alhambra, Alhambra Renaissance Plaza, Almansor Park, or The Alhambra office campus, give us that location when you call and wait somewhere safe and visible. Alhambra is served by I-10, I-710, Valley Boulevard, Main Street, Atlantic Boulevard, and Garfield Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our key cutting by code process, step by step
Tell us what the key is for
A house door, a mailbox, a cabinet, a padlock and a car all use different blanks and methods. Knowing the lock lets us bring the right stock.
We examine the key and the lock
The technician checks the keyway, looks for a code, and judges whether an existing key is good enough to copy or too worn.
Authorization is confirmed where required
Restricted, high-security and "Do Not Duplicate" keys are cut only for the owner or with their authorization.
The key is cut
Standard keys are duplicated on a calibrated machine. Worn, missing or high-security keys are cut by code on a code machine.
The key is deburred and tested
Each key is brushed smooth and tried in the lock. It should enter, turn and withdraw without effort.
Extras are cut and labeled
Additional copies are made from the verified key, and we can stamp or color-code keys so they are easy to tell apart.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Situations we handle regularly
- You moved in with one key for the front door and need copies for the family.
- A cabinet, desk or mailbox is locked and no one has seen the key in years.
- An employer needs twenty keys cut and stamped with numbers.
- A hardware store refused to copy a key stamped "Do Not Duplicate".
- A key has worn so smooth it only works when held at a certain angle.
- A key snapped off in the lock, leaving the tip inside.
Tools, parts and hardware we carry
Accurate keys come from accurate machines. We use calibrated duplicators for standard keys, a code machine that cuts to manufacturer depth and spacing data, a computer-controlled machine for laser-cut and dimple keys, and a tubular key cutter. The vans carry blanks for the common residential and commercial keyways, mailbox and cabinet locks, padlocks and vehicles, plus extractor sets for removing broken keys without damaging the lock.
Terms worth knowing
- Duplication
- Copying the cuts of an existing key onto a new blank.
- Cutting by code
- Cutting a key from its code or measured depths, producing a key to original specification.
- Restricted key
- A key on a protected keyway that can be copied only with the owner’s authorization.
- Bitting
- The pattern of cut depths along a key that matches the pins in its lock.
- Impressioning
- Making a working key for a lock by reading the marks its pins leave on a blank.
- Tubular key
- A cylindrical key with cuts around its end, used on vending machines, some bike locks and equipment.
- Extraction
- Removing a broken or stuck key from a lock with tools that grip the fragment.
- Key blank
- An uncut key of the correct profile for a particular lock, ready to be cut.
What affects the cost of key cutting by code service
- Quantity
- The service call covers the visit, so each additional key in the same visit adds little.
- Copy or origination
- Copying an existing key is quick. Making a key for a lock with no key requires decoding, impressioning or disassembly.
- Type of key
- Standard house keys are inexpensive. High-security, restricted, tubular and automotive keys cost more because of the blanks and equipment involved.
- Extraction work
- Removing a broken key adds time, particularly if someone has already pushed it deeper or used glue.
- Condition of the lock
- A worn or dirty cylinder may need service before any key will work well in it.
- Availability of a code
- A stamped key code makes cutting fast. Without one, more labor is needed to read the lock.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Advice worth knowing
- Test a new key with the door open first, so a poor copy cannot lock you out.
- Keep one clean, rarely used original as a master to copy from.
- Replace keys that are bent or cracked. They tend to break in the lock.
- A light keychain is kinder to both keys and locks.
- If you lose a key along with anything showing your address, rekey the lock.
- Label keys by color or number, never with your name or address.
- Make copies from the original key, not from a copy. Each generation loses accuracy.
- If a key sticks, the lock may need lubrication or the key may be worn. Forcing it risks breaking it.
Professional service compared with doing it yourself
Key kiosks and counter duplicators trace whatever they are given, including the wear. They also cannot cut by code, cannot make a key for a lock without one, and cannot handle restricted or high-security blanks. A locksmith measures the original cuts, corrects for wear, tests the key in your lock, and checks authorization for controlled keys, which protects you from unauthorized copies being made.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Alhambra
Customers who need key cutting by code service often ask about these as well. Each can usually be handled in the same visit to Alhambra.
- Cabinet Key Replacement
Replacing keys for cabinets, desks, drawers and storage units.
- Safe Key Replacement
Replacing keys for certain key-operated safes.
- Padlock Key Replacement
Making keys for padlocks when possible.
- File Cabinet Key Replacement
Making keys for office file cabinets.
- Key Extraction
Removing stuck or broken keys from locks.
- House Key Copy
Duplicating standard residential keys.
- Do Not Duplicate Key Copy
Copying restricted keys only when allowed and with proper authorization.
- Office Key Duplication
Duplicating office and commercial keys.
- High-Security Key Duplication
Duplicating high-security keys with proper authorization.
- Antique Lock Key Making
Creating keys for older lock systems where compatible.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
Key Cutting by Code near Alhambra
We provide the same key cutting by code service in the communities around Alhambra. See the main key cutting by code page or the full list of service areas.
- Key Cutting by Code in San Gabriel
- Key Cutting by Code in South Pasadena
- Key Cutting by Code in San Marino
- Key Cutting by Code in Monterey Park
- Key Cutting by Code in Rosemead
- Key Cutting by Code in Pasadena
- Key Cutting by Code in Temple City
- Key Cutting by Code in South El Monte
- Key Cutting by Code in Montebello
- Key Cutting by Code in East Los Angeles
- Key Cutting by Code in El Monte
- Key Cutting by Code in Arcadia
Key Cutting by Code in Alhambra: frequently asked questions
What is a key code?
It is a number that translates to the exact depths and positions of a key’s cuts. Codes appear on some keys, locks, cabinets and vehicle documents, and let a locksmith cut a perfect key without an original.
What if my key is too worn to copy?
We cut a new key by code, reading the cuts from the lock or from a code number, which gives a better key than copying the worn one.
Can a broken key be copied?
Yes. With both pieces we decode the cuts and make a new key by code.
Why do some stores refuse to copy my key?
It may be stamped "Do Not Duplicate", use a restricted blank they cannot buy, or need a machine they do not have.
How long does key cutting take?
A standard duplicate takes a minute or two. Keys cut by code or made from the lock take longer, typically 10 to 30 minutes.
Is it better to rekey than to keep copying an old key?
If you no longer know who has copies, rekeying is the better choice. It makes all old keys useless and starts you with a fresh set.
Can you copy any key in Alhambra?
We copy most residential, commercial, mailbox, padlock, cabinet and automotive keys. Restricted and patented keys can be cut only by the authorized dealer for that system.
Can you make a key for a lock that has no key?
Usually. Depending on the lock, we decode it, read a stamped code or disassemble the cylinder and fit a key.
Can you make car keys in Alhambra?
Yes. We cut and program car keys on site anywhere in Alhambra, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Alhambra do you serve?
All of Alhambra, including Downtown Alhambra, the Bean Tract, Emery Park, and the Valley Boulevard corridor, and addresses in ZIP codes 91801 and 91803.
How long does it take a locksmith to reach me in Alhambra?
It depends on where the nearest technician is and on traffic along I-10, I-710, or Valley Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
