Quick answer
The 2007 Buick Rendezvous typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Big Daddy Car Key Replacement makes 2007 Buick Rendezvous keys on site in Altadena, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2007 Buick Rendezvous
- Typical key
- Transponder chip key
- Transponder chip
- Yes
- Blade
- Edge-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2007 Buick Rendezvous use?
- How we make a 2007 Buick Rendezvous key
- How Buick key and immobilizer systems work
- Common Buick key and lock problems
- All keys lost or just need a spare?
- Stranded with your Buick right now?
- 2007 Buick Rendezvous key replacement across Altadena
- Getting a 2007 Buick Rendezvous key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Buick key?
- What affects the cost of a 2007 Buick Rendezvous key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Altadena choose Big Daddy
- Looking after your Buick key
- Choosing a car locksmith you can trust
- Other Buick Rendezvous years
- Other Buick models
- Related automotive locksmith services in Altadena
- 2007 Buick Rendezvous keys near Altadena
- 2007 Buick Rendezvous key replacement in Altadena: frequently asked questions
What kind of key does a 2007 Buick Rendezvous use?
The 2007 Buick Rendezvous typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run.
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

How we make a 2007 Buick Rendezvous key
For the 2007 Buick Rendezvous we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.
This page covers the 2007 model year. For other years, see the Buick Rendezvous key replacement overview, or browse all Buick models.
How Buick key and immobilizer systems work
General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.
Older Buicks used GM’s resistor-pellet PASS-Key before moving to transponder keys around 2000. From 2010 the brand switched to laser-cut flip keys and then to proximity fobs with push-button start.
Common Buick key and lock problems
These are the issues we see most often on Buick vehicles in Altadena:
- Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
- Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
- Flip-key blades that loosen or snap at the hinge
- Proximity fobs that stop being detected after a battery or module replacement
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Buick right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
2007 Buick Rendezvous key replacement across Altadena
Located in Los Angeles County, Altadena is an unincorporated community within our San Gabriel Valley service area. Customers anywhere in Altadena, including the Lake Avenue corridor, the Christmas Tree Lane area, the Loma Alta area, and the Lincoln Avenue corridor, can have a mobile technician sent directly to them. We serve the 91001 ZIP code.
As Altadena rebuilds after the January 2025 Eaton Fire, new-construction lock installation, construction-site lock boxes and rekeying for rebuilt and temporary homes are common needs alongside everyday service.
Whether you are at home, at work, or stuck near Christmas Tree Lane, Farnsworth Park, Loma Alta Park, Eaton Canyon, or the Lake Avenue business district, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Altadena follows I-210, Lake Avenue, Fair Oaks Avenue, Altadena Drive, Woodbury Road, and Lincoln Avenue. You get a realistic arrival estimate when you call.
Getting a 2007 Buick Rendezvous key made, step by step
Call with the year, make and model
Tell us you need a key for a 2007 Buick Rendezvous, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Buick key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2007 Buick Rendezvous key
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Situations we are called to most often
- A used car was sold with one worn key and no spare.
- The key fob went through the washing machine.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- A hardware-store copy opens the door but the engine will not start.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers in Altadena choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Looking after your Buick key
The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
Choosing a car locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
Other Buick Rendezvous years
Other Buick models
- Buick Regal keys
- Buick Enclave keys
- Buick Century keys
- Buick LeSabre keys
- Buick LaCrosse keys
- Buick Park Avenue keys
- Buick Envision keys
- Buick Encore keys
- Buick Encore GX keys
- Buick Lucerne keys
- Buick Verano keys
- Buick Cascada keys
- Buick Rainier keys
Related automotive locksmith services in Altadena
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
2007 Buick Rendezvous keys near Altadena
We make 2007 Buick Rendezvous keys in the communities around Altadena as well. See the main 2007 Buick Rendezvous key replacement page or the Altadena locksmith page.
- 2007 Buick Rendezvous keys in Pasadena
- 2007 Buick Rendezvous keys in La Cañada Flintridge
- 2007 Buick Rendezvous keys in Sierra Madre
- 2007 Buick Rendezvous keys in San Marino
- 2007 Buick Rendezvous keys in South Pasadena
- 2007 Buick Rendezvous keys in Arcadia
- 2007 Buick Rendezvous keys in Alhambra
- 2007 Buick Rendezvous keys in San Gabriel
- 2007 Buick Rendezvous keys in Temple City
- 2007 Buick Rendezvous keys in Glendale
- 2007 Buick Rendezvous keys in Monrovia
- 2007 Buick Rendezvous keys in Rosemead
2007 Buick Rendezvous key replacement in Altadena: frequently asked questions
Does my 2007 Buick Rendezvous key have a chip?
Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.
Can I program a 2007 Buick Rendezvous key myself?
Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.
Why does my Buick crank but not start with the new copy?
The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.
Why is the security light flashing on my Buick and the engine will not start?
The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.
Can a Buick key be programmed without going to the dealer?
Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.
Can you unlock my 2007 Buick Rendezvous if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Do you also repair the ignition on a 2007 Buick Rendezvous?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Do I have to tow my 2007 Buick Rendezvous to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you make a 2007 Buick Rendezvous key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Is a locksmith-made Buick key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
How long does it take a locksmith to reach me in Altadena?
It depends on where the nearest technician is and on traffic along I-210, Lake Avenue, or Fair Oaks Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Can you make car keys in Altadena?
Yes. We cut and program car keys on site anywhere in Altadena, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
