Quick answer
Mortise Lock Repair: Repairing or replacing worn, jammed or damaged mortise lock systems. Big Daddy Car Key Replacement provides mortise lock repair service in Altadena as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Mortise Lock Repair
- Area
- Altadena, Los Angeles County, CA (91001)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What mortise lock repair involves
- Who we help in Altadena
- Signs you need mortise lock repair service
- Mortise Lock Repair across Altadena
- Our mortise lock repair process, step by step
- Common situations in Altadena
- Tools, parts and hardware we carry
- Trade terms explained
- What affects the cost of mortise lock repair service
- What you can expect from us
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- How we work on every job
- Questions to ask any locksmith
- How to prepare for the visit
- Once the work is done
- Related locksmith services in Altadena
- Mortise Lock Repair near Altadena
- Mortise Lock Repair in Altadena: frequently asked questions
What mortise lock repair involves
Repairing or replacing worn, jammed or damaged mortise lock systems. Mortise locks are built to be rebuilt. Springs, hubs, latches and deadbolt assemblies can be replaced individually, which matters on older buildings where a new lock would not fit the existing pocket. We open the case, replace worn parts, clean and lubricate, and reset the cylinder cam and trim.

Every business in Altadena eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our mortise lock repair service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who we help in Altadena
Our commercial customers in Altadena include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Altadena.
Signs you need mortise lock repair service
People in Altadena usually call us for mortise lock repair service in situations like these:
- The lever droops or the latch drags
- The deadbolt will not throw with the key
- The thumbturn or lever spins freely
- An antique mortise lock has stopped working
Mortise Lock Repair across Altadena
Altadena is an unincorporated community in Los Angeles County, part of the San Gabriel Valley area we cover every day. We cover every part of Altadena, including the Lake Avenue corridor, the Christmas Tree Lane area, the Loma Alta area, and the Lincoln Avenue corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 91001.
As Altadena rebuilds after the January 2025 Eaton Fire, new-construction lock installation, construction-site lock boxes and rekeying for rebuilt and temporary homes are common needs alongside everyday service.
Whether you are at home, at work, or stuck near Christmas Tree Lane, Farnsworth Park, Loma Alta Park, Eaton Canyon, or the Lake Avenue business district, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Altadena by I-210, Lake Avenue, Fair Oaks Avenue, Altadena Drive, Woodbury Road, and Lincoln Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our mortise lock repair process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Altadena
- The back door shows pry marks around the latch after the weekend.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A closer has failed and the front door slams hard enough to rattle the glass.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The storefront door will not latch and the shop cannot be left for the night.
- A manager is let go and returns only some of the keys issued.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
What affects the cost of mortise lock repair service
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Altadena. The technician confirms the figure before starting.
What you can expect from us
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Altadena.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Practical advice from our locksmiths
- Consider keypad or card access for doors with frequent staff turnover.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Give each employee access only to the doors their job requires.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Altadena
Customers who need mortise lock repair service often ask about these as well. Each can usually be handled in the same visit to Altadena.
- Exit Device Repair
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim.
- File Cabinet Lock Replacement
Replacing locks on filing cabinets, desks and office storage.
- Storefront Lock Replacement
Replacing mortise locks, hook bolts, paddle handles, thumb turns and commercial cylinders.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Commercial Door Hardware Repair
Repairing commercial handles, hinges, closers, locks, latches, strikes, pivots and door frames.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Office Building Locksmith
Master key systems, access control, door hardware, lock repairs and tenant suite rekeys.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
Mortise Lock Repair near Altadena
We provide the same mortise lock repair service in the communities around Altadena. See the main mortise lock repair page or the full list of service areas.
- Mortise Lock Repair in Pasadena
- Mortise Lock Repair in La Cañada Flintridge
- Mortise Lock Repair in Sierra Madre
- Mortise Lock Repair in San Marino
- Mortise Lock Repair in South Pasadena
- Mortise Lock Repair in Arcadia
- Mortise Lock Repair in Alhambra
- Mortise Lock Repair in San Gabriel
- Mortise Lock Repair in Temple City
- Mortise Lock Repair in Glendale
- Mortise Lock Repair in Monrovia
- Mortise Lock Repair in Rosemead
Mortise Lock Repair in Altadena: frequently asked questions
Can an old mortise lock be repaired instead of replaced?
Very often. Most failures are a broken spring or worn hub, both replaceable. Repair keeps the original door prep and trim, which is important on historic doors where modern locks would not fit.
Can you work outside our business hours in Altadena?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Can you make car keys in Altadena?
Yes. We cut and program car keys on site anywhere in Altadena, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you have a locksmith shop in Altadena?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Altadena and the rest of the San Gabriel Valley area. All work is done at your location.
How long does it take a locksmith to reach me in Altadena?
It depends on where the nearest technician is and on traffic along I-210, Lake Avenue, or Fair Oaks Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
