Quick answer
The 2000 Subaru Legacy typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 2000 Subaru Legacy keys on site in Arcadia, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2000 Subaru Legacy
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2000 Subaru Legacy use?
- How we make a 2000 Subaru Legacy key
- How Subaru key and immobilizer systems work
- Common Subaru key and lock problems
- All keys lost or just need a spare?
- Stranded with your Subaru right now?
- 2000 Subaru Legacy key replacement across Arcadia
- Getting a 2000 Subaru Legacy key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Subaru key?
- What affects the cost of a 2000 Subaru Legacy key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Arcadia choose Big Daddy
- Looking after your Subaru key
- Choosing a car locksmith you can trust
- Other Subaru Legacy years
- Other Subaru models
- Related automotive locksmith services in Arcadia
- 2000 Subaru Legacy keys near Arcadia
- 2000 Subaru Legacy key replacement in Arcadia: frequently asked questions
What kind of key does a 2000 Subaru Legacy use?
The 2000 Subaru Legacy typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 2000 Subaru Legacy key
For the 2000 Subaru Legacy we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 2000 model year. For other years, see the Subaru Legacy key replacement overview, or browse all Subaru models.
How Subaru key and immobilizer systems work
Subaru introduced transponder immobilizers in the mid-2000s. Keys are registered through the diagnostic port with a security code, and all keys must be present because they are registered together. Later models add remote-head keys and proximity fobs with push-button start, programmed in a similar way.
Subaru introduced immobilizers on the 2005 Legacy and Outback and extended them through the range by 2008. Push-button start arrived on upper trims from 2013 and is now common across the lineup.
Common Subaru key and lock problems
These are the issues we see most often on Subaru vehicles in Arcadia:
- Lost keys on vehicles where every key is registered at once
- Remote-head keys with failed buttons
- Proximity fobs not detected after battery replacement
- Uncertainty about whether older Imprezas and Foresters have a chip
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Subaru right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
2000 Subaru Legacy key replacement across Arcadia
Located in Los Angeles County, Arcadia is an incorporated city within our San Gabriel Valley service area. Our Subaru key replacement service reaches all of Arcadia, including the Upper Rancho, the Lower Rancho, Santa Anita Oaks, the Baldwin Avenue corridor, and Downtown Arcadia, as well as the streets in between. You do not need to bring anything to a shop. We serve the 91006 and 91007 ZIP codes.
Arcadia is known for large custom homes, many newly built, where owners want multi-point locks, high-security cylinders, safes and smart entry systems installed correctly the first time.
If you are out and about near Santa Anita Park, The Shops at Santa Anita, the Los Angeles County Arboretum, or Arcadia County Park, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Arcadia follows I-210, Huntington Drive, Baldwin Avenue, Santa Anita Avenue, Foothill Boulevard, and Duarte Road. You get a realistic arrival estimate when you call.
Getting a 2000 Subaru Legacy key made, step by step
Call with the year, make and model
Tell us you need a key for a 2000 Subaru Legacy, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Subaru key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2000 Subaru Legacy key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Situations we are called to most often
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key is locked in the trunk and the trunk release is disabled.
- The ignition will not turn and the key will not come out.
- The key fob went through the washing machine.
- A used car was sold with one worn key and no spare.
Why drivers in Arcadia choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Arcadia.

Looking after your Subaru key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
Choosing a car locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Other Subaru Legacy years
- 2025 Legacy
- 2024 Legacy
- 2023 Legacy
- 2022 Legacy
- 2021 Legacy
- 2020 Legacy
- 2019 Legacy
- 2018 Legacy
- 2017 Legacy
- 2016 Legacy
- 2015 Legacy
- 2014 Legacy
- 2013 Legacy
- 2012 Legacy
- 2011 Legacy
- 2010 Legacy
- 2009 Legacy
- 2008 Legacy
- 2007 Legacy
- 2006 Legacy
- 2005 Legacy
- 2004 Legacy
- 2003 Legacy
- 2002 Legacy
- 2001 Legacy
- 1999 Legacy
- 1998 Legacy
- 1997 Legacy
- 1996 Legacy
- 1995 Legacy
- 1994 Legacy
- 1993 Legacy
- 1992 Legacy
- 1991 Legacy
- 1990 Legacy
Other Subaru models
- Subaru Impreza keys
- Subaru Outback keys
- Subaru Forester keys
- Subaru WRX keys
- Subaru BRZ keys
- Subaru Crosstrek keys
- Subaru Tribeca keys
- Subaru Ascent keys
- Subaru Baja keys
- Subaru Solterra keys
Related automotive locksmith services in Arcadia
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Spare Car Key
Creating duplicate or backup keys.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Motorcycle Key Replacement
Replacing lost or broken motorcycle keys.
2000 Subaru Legacy keys near Arcadia
We make 2000 Subaru Legacy keys in the communities around Arcadia as well. See the main 2000 Subaru Legacy key replacement page or the Arcadia locksmith page.
- 2000 Subaru Legacy keys in Sierra Madre
- 2000 Subaru Legacy keys in Monrovia
- 2000 Subaru Legacy keys in Temple City
- 2000 Subaru Legacy keys in Duarte
- 2000 Subaru Legacy keys in Bradbury
- 2000 Subaru Legacy keys in San Marino
- 2000 Subaru Legacy keys in Rosemead
- 2000 Subaru Legacy keys in El Monte
- 2000 Subaru Legacy keys in San Gabriel
- 2000 Subaru Legacy keys in Baldwin Park
- 2000 Subaru Legacy keys in Alhambra
- 2000 Subaru Legacy keys in South El Monte
2000 Subaru Legacy key replacement in Arcadia: frequently asked questions
Does a 2000 Subaru Legacy key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 2000 Subaru Legacy key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Subaru key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Does my older Subaru have a chip key?
Legacy and Outback models have had immobilizers since 2005, and other models followed by about 2008. We check your key and vehicle before cutting.
Do I need to bring all my Subaru keys for programming?
Yes. Keys are registered as a set, and any key not present will stop starting the car.
Can you unlock my 2000 Subaru Legacy if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
What do you need from me to make a 2000 Subaru Legacy key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Does car insurance cover a replacement Subaru key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Can you program a key I bought online for my 2000 Subaru Legacy?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Can you make a key for a 2000 Subaru Legacy if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Can you make car keys in Arcadia?
Yes. We cut and program car keys on site anywhere in Arcadia, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How long does it take a locksmith to reach me in Arcadia?
It depends on where the nearest technician is and on traffic along I-210, Huntington Drive, or Baldwin Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
