Quick answer
Commercial Door Hardware: Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates. Big Daddy Car Key Replacement provides commercial door hardware service in Arcadia as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Door Hardware
- Area
- Arcadia, Los Angeles County, CA (91006, 91007)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our commercial door hardware service
- Who uses this service
- When you need commercial door hardware service
- Commercial Door Hardware across Arcadia
- What happens when you call
- Typical calls we receive
- What our technicians bring
- Trade terms explained
- Cost factors for commercial door hardware service
- What you can expect from us
- Practical advice from our locksmiths
- Doing it yourself versus calling a professional
- What we commit to
- Choosing a locksmith: a short checklist
- What to have ready when you call
- After the visit
- Related locksmith services in Arcadia
- Commercial Door Hardware near Arcadia
- Commercial Door Hardware in Arcadia: frequently asked questions
About our commercial door hardware service
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates. Commercial door hardware is specified by opening: the right hinge type and count, a closer, a lock or exit device with the correct function, and protection such as kick plates and latch guards. We supply and install complete hardware sets for tenant improvements and replace individual components that have worn out.

Every business in Arcadia eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our commercial door hardware service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who uses this service
Our commercial customers in Arcadia include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Arcadia.
When you need commercial door hardware service
People in Arcadia usually call us for commercial door hardware service in situations like these:
- A build-out needs complete hardware sets
- Hardware finishes or functions do not match
- Doors lack kick plates or latch protection
- Hinges are worn and doors are sagging
Commercial Door Hardware across Arcadia
Arcadia is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. We cover every part of Arcadia, including the Upper Rancho, the Lower Rancho, Santa Anita Oaks, the Baldwin Avenue corridor, and Downtown Arcadia. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 91006 and 91007.
Arcadia is known for large custom homes, many newly built, where owners want multi-point locks, high-security cylinders, safes and smart entry systems installed correctly the first time.
Whether you are at home, at work, or stuck near Santa Anita Park, The Shops at Santa Anita, the Los Angeles County Arboretum, or Arcadia County Park, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Arcadia follows I-210, Huntington Drive, Baldwin Avenue, Santa Anita Avenue, Foothill Boulevard, and Duarte Road. You get a realistic arrival estimate when you call.
What happens when you call
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- The storefront door will not latch and the shop cannot be left for the night.
- A manager is let go and returns only some of the keys issued.
- The back door shows pry marks around the latch after the weekend.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A closer has failed and the front door slams hard enough to rattle the glass.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
Cost factors for commercial door hardware service
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Arcadia. The technician confirms the figure before starting.
What you can expect from us
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Arcadia.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Practical advice from our locksmiths
- Give each employee access only to the doors their job requires.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Store spare keys in a locked key cabinet, not a desk drawer.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Arcadia
Customers who need commercial door hardware service often ask about these as well. Each can usually be handled in the same visit to Arcadia.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Office Building Locksmith
Master key systems, access control, door hardware, lock repairs and tenant suite rekeys.
- Automatic Door Closer Adjustment
Adjusting speed, latch, sweep and backcheck settings.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Panic Bar Repair
Repairing panic bars that stick, fail to latch, alarm or do not open correctly.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
Commercial Door Hardware near Arcadia
We provide the same commercial door hardware service in the communities around Arcadia. See the main commercial door hardware page or the full list of service areas.
- Commercial Door Hardware in Sierra Madre
- Commercial Door Hardware in Monrovia
- Commercial Door Hardware in Temple City
- Commercial Door Hardware in Duarte
- Commercial Door Hardware in Bradbury
- Commercial Door Hardware in San Marino
- Commercial Door Hardware in Rosemead
- Commercial Door Hardware in El Monte
- Commercial Door Hardware in San Gabriel
- Commercial Door Hardware in Baldwin Park
- Commercial Door Hardware in Alhambra
- Commercial Door Hardware in South El Monte
Commercial Door Hardware in Arcadia: frequently asked questions
What hardware does a commercial door need?
Typically hinges or pivots rated for the door’s weight, a closer, a Grade 1 lock or exit device with the right function, a strike, and weatherstripping and threshold on exterior doors. Fire-rated doors need labeled hardware throughout.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Can you work outside our business hours in Arcadia?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Are you open 24 hours in Arcadia?
Yes. We take calls and dispatch to Arcadia 24 hours a day, including weekends and holidays.
Do you have a locksmith shop in Arcadia?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Arcadia and the rest of the San Gabriel Valley area. All work is done at your location.
Can you make car keys in Arcadia?
Yes. We cut and program car keys on site anywhere in Arcadia, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
