Quick answer
Electric Strike Installation: Installing electric strikes for buzz-in entry systems. Big Daddy Car Key Replacement provides electric strike installation service in Arleta as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Electric Strike Installation
- Area
- Arleta, Los Angeles County, CA (91331)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What electric strike installation means
- Customers we serve in Arleta
- Signs you need electric strike installation service
- Electric Strike Installation across Arleta
- Our electric strike installation process, step by step
- Common situations in Arleta
- Tools, parts and hardware we carry
- Trade terms explained
- Cost factors for electric strike installation service
- Why call Big Daddy Car Key Replacement
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- Our service standards
- How to choose a locksmith you can trust
- What to have ready when you call
- Aftercare and records
- Related locksmith services in Arleta
- Electric Strike Installation near Arleta
- Electric Strike Installation in Arleta: frequently asked questions
What electric strike installation means
Installing electric strikes for buzz-in entry systems. An electric strike replaces the fixed strike in the frame with one whose keeper releases electrically, letting the door be pushed open while the lock stays locked. It works with your existing lockset or exit device, keeps the door latched during a power loss when set fail-secure, and is the standard choice for buzz-in doors.

Codes, cards, fobs and phones have made keys optional. For electric strike installation service in Arleta, call (562) 550-7206. We help you choose equipment that fits the door and the way people use it, install it, and make sure there is always a way in if batteries or power fail.
Customers we serve in Arleta
Electronic lock and access control customers in Arleta range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Arleta.
Signs you need electric strike installation service
These are the most common reasons customers in Arleta ask for electric strike installation service:
- You want to buzz visitors in from a desk
- An access system is being added to an existing lock
- The door must stay locked if power fails
- A panic-bar door needs electric release
Electric Strike Installation across Arleta
Located in Los Angeles County, Arleta is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. Our electric strike installation service reaches all of Arleta, including Branford Park, the Arleta Avenue corridor, and the Woodman Avenue corridor, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP code 91331.
Arleta is mostly postwar single-family tract homes from the late 1940s and 1950s, many still carrying original knob locks and aging deadbolts that are due for a rekey or an upgrade.
People call us from all over Arleta, including the areas around Branford Park, Arleta High School, and Hansen Dam Recreation Area. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Arleta follows I-5, SR-170, Woodman Avenue, Van Nuys Boulevard, Osborne Street, and Terra Bella Street. You get a realistic arrival estimate when you call.
Our electric strike installation process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Arleta
- A business needs to know who entered the stockroom and when.
- A short-term rental needs a new code for every guest.
- Children get home from school before their parents and keep losing keys.
- A smart lock reports "jammed" every evening when the door swells.
- A homeowner wants to let a contractor in while at work.
- An office wants to stop rekeying each time an employee leaves.
- An apartment building wants to replace a shared entry key with fobs.
Tools, parts and hardware we carry
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Trade terms explained
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Audit trail
- A stored record of which credential opened a door and when.
Cost factors for electric strike installation service
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Arleta.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Practical advice from our locksmiths
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Give each person their own code or credential so access can be removed individually.
- Turn on two-factor authentication for any account that can unlock your door.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Review the user list every few months and remove anyone who no longer needs access.
- Keep the mechanical override key somewhere accessible outside the locked area.
Why this is a job for a locksmith
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Arleta
Customers who need electric strike installation service often ask about these as well. Each can usually be handled in the same visit to Arleta.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Bluetooth Lock Installation
Installing Bluetooth-enabled locks.
- Smart Locks & Keyless Entry
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Access Code Programming
Adding, removing or changing access codes.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Intercom Lock Integration
Connecting locks with intercom systems for controlled entry.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
Electric Strike Installation near Arleta
We provide the same electric strike installation service in the communities around Arleta. See the main electric strike installation page or the full list of service areas.
- Electric Strike Installation in Pacoima
- Electric Strike Installation in Panorama City
- Electric Strike Installation in Mission Hills
- Electric Strike Installation in San Fernando
- Electric Strike Installation in North Hills
- Electric Strike Installation in Valley Glen
- Electric Strike Installation in Van Nuys
- Electric Strike Installation in Sun Valley
- Electric Strike Installation in Lake View Terrace
- Electric Strike Installation in Sylmar
- Electric Strike Installation in Lake Balboa
- Electric Strike Installation in Granada Hills
Electric Strike Installation in Arleta: frequently asked questions
What is the difference between an electric strike and a maglock?
An electric strike releases the latch of a normal lock and can stay locked without power. A maglock holds the door with a magnet and always unlocks when power is lost.
Which smart lock is best for a home in Arleta?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
How long does it take a locksmith to reach me in Arleta?
It depends on where the nearest technician is and on traffic along I-5, SR-170, or Woodman Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Are you open 24 hours in Arleta?
Yes. We take calls and dispatch to Arleta 24 hours a day, including weekends and holidays.
Can you make car keys in Arleta?
Yes. We cut and program car keys on site anywhere in Arleta, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
