Quick answer
Lock Installation: Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. Big Daddy Car Key Replacement provides lock installation service in Arleta as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Lock Installation
- Area
- Arleta, Los Angeles County, CA (91331)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What lock installation means
- Who uses this service
- When you need lock installation service
- Lock Installation across Arleta
- Our lock installation process, step by step
- Common situations in Arleta
- Tools, parts and hardware we carry
- Terms worth knowing
- Cost factors for lock installation service
- Why call Big Daddy Car Key Replacement
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- How we work on every job
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in Arleta
- Lock Installation near Arleta
- Lock Installation in Arleta: frequently asked questions
What lock installation means
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. A fresh installation means drilling and fitting a lock where there was none, or where the door is new. Accuracy matters: the cross bore, edge bore and strike must line up so the bolt throws fully without rubbing. We use a boring jig, chisel the mortises cleanly and test the door under real closing pressure.

Your locks are only as good as their condition and the keys in circulation. Our lock installation service in Arleta deals with both: hardware that works smoothly and keys that only the right people hold. A mobile technician comes to your home, looks at each door, explains the options in plain terms and completes most work in one visit.
Who uses this service
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Arleta. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Arleta.
When you need lock installation service
People in Arleta usually call us for lock installation service in situations like these:
- A door has a knob but no deadbolt
- You added a home office or rental unit
- A new or replacement door arrived without hardware
- A garage entry or side door has no lock
Lock Installation across Arleta
Arleta is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Customers anywhere in Arleta, including Branford Park, the Arleta Avenue corridor, and the Woodman Avenue corridor, can have a mobile technician sent directly to them. That includes addresses in ZIP code 91331.
Arleta is mostly postwar single-family tract homes from the late 1940s and 1950s, many still carrying original knob locks and aging deadbolts that are due for a rekey or an upgrade.
Whether you are at home, at work, or stuck near Branford Park, Arleta High School, or Hansen Dam Recreation Area, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Arleta follows I-5, SR-170, Woodman Avenue, Van Nuys Boulevard, Osborne Street, and Terra Bella Street. You get a realistic arrival estimate when you call.
Our lock installation process, step by step
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Arleta
- A roommate, partner or tenant has moved out and still has a key.
- Each door in the house takes a different key and the ring keeps growing.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- A handbag with house keys and a driver’s license was stolen from a car.
- An older parent is having trouble with a round knob and needs lever handles.
Tools, parts and hardware we carry
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Terms worth knowing
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
- Keyed alike
- Several locks set to operate with the same key.
Cost factors for lock installation service
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Arleta. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Practical advice from our locksmiths
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
- Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
Professional service compared with doing it yourself
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Arleta
Customers who need lock installation service often ask about these as well. Each can usually be handled in the same visit to Arleta.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Door Handle Lock Repair
Repairing broken, loose, jammed or malfunctioning door handles and lever locks.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Eviction Locksmith Service
Lock changing or rekeying after a legal eviction, usually coordinated with property managers or law enforcement.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Lost House Key Service
Rekeying or replacing locks when house keys are lost or stolen.
- Master Key System for Home
Creating one key that opens multiple selected locks in a home or property.
- Door Knob Lock Installation
Installing keyed door knobs, privacy knobs, passage knobs and interior locking hardware.
- Patio Door Lock Repair
Repairing or replacing sliding glass door locks, patio door latches and security bars.
- High-Security Lock Installation
Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
Lock Installation near Arleta
We provide the same lock installation service in the communities around Arleta. See the main lock installation page or the full list of service areas.
- Lock Installation in Pacoima
- Lock Installation in Panorama City
- Lock Installation in Mission Hills
- Lock Installation in San Fernando
- Lock Installation in North Hills
- Lock Installation in Valley Glen
- Lock Installation in Van Nuys
- Lock Installation in Sun Valley
- Lock Installation in Lake View Terrace
- Lock Installation in Sylmar
- Lock Installation in Lake Balboa
- Lock Installation in Granada Hills
Lock Installation in Arleta: frequently asked questions
Can you install a lock on a door that has never had one?
Yes. We bore the door and frame with a jig, mortise the latch and strike, and fit the lock so it operates smoothly. This works on wood, fiberglass and most metal doors.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
Should I rekey or replace the locks in my Arleta home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
Do you have a locksmith shop in Arleta?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Arleta and the rest of the San Fernando Valley area. All work is done at your location.
Can you make car keys in Arleta?
Yes. We cut and program car keys on site anywhere in Arleta, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Are you open 24 hours in Arleta?
Yes. We take calls and dispatch to Arleta 24 hours a day, including weekends and holidays.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
