Quick answer
The 2000 Ford Excursion typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Big Daddy Car Key Replacement makes 2000 Ford Excursion keys on site in Artesia, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2000 Ford Excursion
- Typical key
- Transponder chip key
- Transponder chip
- Yes
- Blade
- Edge-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2000 Ford Excursion use?
- How we make a 2000 Ford Excursion key
- How Ford key and immobilizer systems work
- Common Ford key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ford right now?
- 2000 Ford Excursion key replacement across Artesia
- Getting a 2000 Ford Excursion key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ford key?
- What affects the cost of a 2000 Ford Excursion key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Artesia choose Big Daddy
- Looking after your Ford key
- Choosing a car locksmith you can trust
- Other Ford Excursion years
- Other Ford models
- Related automotive locksmith services in Artesia
- 2000 Ford Excursion keys near Artesia
- 2000 Ford Excursion key replacement in Artesia: frequently asked questions
What kind of key does a 2000 Ford Excursion use?
The 2000 Ford Excursion typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run.
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

How we make a 2000 Ford Excursion key
For the 2000 Ford Excursion we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.
This page covers the 2000 model year. For other years, see the Ford Excursion key replacement overview, or browse all Ford models.
How Ford key and immobilizer systems work
Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.
Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.
Common Ford key and lock problems
These are the issues we see most often on Ford vehicles in Artesia:
- A rapidly flashing theft light and no start after using an unprogrammed copy
- Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
- Remote-head keys whose buttons wear through
- Door keypad codes that owners have forgotten or never learned
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Ford right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
2000 Ford Excursion key replacement across Artesia
Located in Los Angeles County, Artesia is an incorporated city within our Gateway Cities service area. Our Ford key replacement service reaches all of Artesia, including the Pioneer Boulevard Little India district, the South Street corridor, and the Artesia Boulevard corridor, as well as the streets in between. You do not need to bring anything to a shop. We serve the 90701 ZIP code.
Artesia is a small city known for the shops and restaurants of Little India, where jewelry and retail storefronts need high-security cylinders, gate locks and dependable safes.
People call us from all over Artesia, including the areas around Little India on Pioneer Boulevard, Artesia Park, the Artesia Historical Museum, and the Artesia Towne Center. A landmark or cross street helps the technician reach you quickly. Artesia is served by SR-91, I-605, Pioneer Boulevard, Artesia Boulevard, South Street, and 183rd Street, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 2000 Ford Excursion key made, step by step
Call with the year, make and model
Tell us you need a key for a 2000 Ford Excursion, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ford key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2000 Ford Excursion key
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Situations we are called to most often
- A hardware-store copy opens the door but the engine will not start.
- A used car was sold with one worn key and no spare.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The dash reads "key not detected" and the start button does nothing.
- The key fob went through the washing machine.
Why drivers in Artesia choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Artesia.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Looking after your Ford key
The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
Choosing a car locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Other Ford Excursion years
Other Ford models
- Ford E-350 keys
- Ford F-150 keys
- Ford Mustang keys
- Ford Explorer keys
- Ford Expedition keys
- Ford Ranger keys
- Ford Taurus keys
- Ford F-250 Super Duty keys
- Ford F-350 Super Duty keys
- Ford Escape keys
- Ford E-150 keys
- Ford E-250 keys
- Ford Crown Victoria keys
- Ford Focus keys
Related automotive locksmith services in Artesia
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
2000 Ford Excursion keys near Artesia
We make 2000 Ford Excursion keys in the communities around Artesia as well. See the main 2000 Ford Excursion key replacement page or the Artesia locksmith page.
- 2000 Ford Excursion keys in Cerritos
- 2000 Ford Excursion keys in Bellflower
- 2000 Ford Excursion keys in Hawaiian Gardens
- 2000 Ford Excursion keys in Norwalk
- 2000 Ford Excursion keys in Lakewood
- 2000 Ford Excursion keys in Cypress
- 2000 Ford Excursion keys in Paramount
- 2000 Ford Excursion keys in Buena Park
- 2000 Ford Excursion keys in La Mirada
- 2000 Ford Excursion keys in Santa Fe Springs
- 2000 Ford Excursion keys in Downey
- 2000 Ford Excursion keys in Signal Hill
2000 Ford Excursion key replacement in Artesia: frequently asked questions
Does my 2000 Ford Excursion key have a chip?
Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.
Can I program a 2000 Ford Excursion key myself?
Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.
Why does my Ford crank but not start with the new copy?
The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.
I have only one Ford key. Can I program a second one myself?
No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.
Why does programming a Ford key take ten minutes of waiting?
PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.
How much does a 2000 Ford Excursion key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Can you make a key for a 2000 Ford Excursion if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Can you make a 2000 Ford Excursion key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Is a locksmith-made Ford key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you program a key I bought online for my 2000 Ford Excursion?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
How long does it take a locksmith to reach me in Artesia?
It depends on where the nearest technician is and on traffic along SR-91, I-605, or Pioneer Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Which parts of Artesia do you serve?
All of Artesia, including the Pioneer Boulevard Little India district, the South Street corridor, and the Artesia Boulevard corridor, and addresses in ZIP code 90701.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
