Quick answer
The 1996 Ford Explorer typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1996 Ford Explorer keys on site in Avalon, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1996 Ford Explorer
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1996 Ford Explorer use?
- How we make a 1996 Ford Explorer key
- How Ford key and immobilizer systems work
- Common Ford key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ford right now?
- 1996 Ford Explorer key replacement across Avalon
- Getting a 1996 Ford Explorer key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ford key?
- What affects the cost of a 1996 Ford Explorer key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Avalon choose Big Daddy
- Looking after your Ford key
- Choosing a car locksmith you can trust
- Other Ford Explorer years
- Other Ford models
- Related automotive locksmith services in Avalon
- 1996 Ford Explorer keys near Avalon
- 1996 Ford Explorer key replacement in Avalon: frequently asked questions
What kind of key does a 1996 Ford Explorer use?
The 1996 Ford Explorer typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1996 Ford Explorer key
For the 1996 Ford Explorer we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1996 model year. For other years, see the Ford Explorer key replacement overview, or browse all Ford models.
How Ford key and immobilizer systems work
Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.
Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.
Common Ford key and lock problems
These are the issues we see most often on Ford vehicles in Avalon:
- A rapidly flashing theft light and no start after using an unprogrammed copy
- Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
- Remote-head keys whose buttons wear through
- Door keypad codes that owners have forgotten or never learned
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Ford right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1996 Ford Explorer key replacement across Avalon
Avalon is on Santa Catalina Island. Service there is by appointment and depends on ferry schedules, so please call ahead to arrange a visit.
Located in Los Angeles County, Avalon is an incorporated city within our Santa Catalina Island service area. Our Ford key replacement service reaches all of Avalon, including the Avalon waterfront, the Flats, Hamilton Cove, and the hillside streets above the harbor, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP code 90704.
Avalon’s homes, vacation rentals, hotels and golf carts sit in constant salt air, so corrosion-resistant hardware, rental keypad locks and cart or boat keys are the usual needs.
If you are out and about near the Catalina Casino, Avalon Harbor, the Wrigley Memorial and Botanic Garden, or the Green Pleasure Pier, give us that location when you call and wait somewhere safe and visible. Avalon is served by Crescent Avenue, Sumner Avenue, Pebbly Beach Road, and Avalon Canyon Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 1996 Ford Explorer key made, step by step
Call with the year, make and model
Tell us you need a key for a 1996 Ford Explorer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ford key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1996 Ford Explorer key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- The key fob went through the washing machine.
- The dash reads "key not detected" and the start button does nothing.
- The key is locked in the trunk and the trunk release is disabled.
- A used car was sold with one worn key and no spare.
Why drivers in Avalon choose Big Daddy
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Avalon.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Looking after your Ford key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
Choosing a car locksmith you can trust
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
Other Ford Explorer years
- 2026 Explorer
- 2025 Explorer
- 2024 Explorer
- 2023 Explorer
- 2022 Explorer
- 2021 Explorer
- 2020 Explorer
- 2019 Explorer
- 2018 Explorer
- 2017 Explorer
- 2016 Explorer
- 2015 Explorer
- 2014 Explorer
- 2013 Explorer
- 2012 Explorer
- 2011 Explorer
- 2010 Explorer
- 2009 Explorer
- 2008 Explorer
- 2007 Explorer
- 2006 Explorer
- 2005 Explorer
- 2004 Explorer
- 2003 Explorer
- 2002 Explorer
- 2001 Explorer
- 2000 Explorer
- 1999 Explorer
- 1998 Explorer
- 1997 Explorer
- 1995 Explorer
- 1994 Explorer
- 1993 Explorer
- 1992 Explorer
- 1991 Explorer
Other Ford models
- Ford E-350 keys
- Ford F-150 keys
- Ford Mustang keys
- Ford Expedition keys
- Ford Ranger keys
- Ford Taurus keys
- Ford F-250 Super Duty keys
- Ford F-350 Super Duty keys
- Ford Escape keys
- Ford E-150 keys
- Ford E-250 keys
- Ford Crown Victoria keys
- Ford Focus keys
Related automotive locksmith services in Avalon
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Key Fob Programming
Programming new or replacement key fobs.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
1996 Ford Explorer keys near Avalon
We make 1996 Ford Explorer keys in the communities around Avalon as well. See the main 1996 Ford Explorer key replacement page or the Avalon locksmith page.
- 1996 Ford Explorer keys in Rancho Palos Verdes
- 1996 Ford Explorer keys in Rolling Hills
- 1996 Ford Explorer keys in Long Beach
- 1996 Ford Explorer keys in Rolling Hills Estates
- 1996 Ford Explorer keys in Lomita
- 1996 Ford Explorer keys in Palos Verdes Estates
- 1996 Ford Explorer keys in West Carson
- 1996 Ford Explorer keys in Signal Hill
- 1996 Ford Explorer keys in Carson
- 1996 Ford Explorer keys in Torrance
- 1996 Ford Explorer keys in Redondo Beach
- 1996 Ford Explorer keys in Hermosa Beach
1996 Ford Explorer key replacement in Avalon: frequently asked questions
Does a 1996 Ford Explorer key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1996 Ford Explorer key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Ford key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
I have only one Ford key. Can I program a second one myself?
No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.
Why does programming a Ford key take ten minutes of waiting?
PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.
Do you also repair the ignition on a 1996 Ford Explorer?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
How much does a 1996 Ford Explorer key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Can you program a key I bought online for my 1996 Ford Explorer?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
How many keys should I have for my 1996 Ford Explorer?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Can you make a 1996 Ford Explorer key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Can you make car keys in Avalon?
Yes. We cut and program car keys on site anywhere in Avalon, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is there a travel charge for Avalon?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Avalon, so you know the cost in advance.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
