Quick answer
Magnetic Lock Installation: Installing maglocks for controlled entry doors. Big Daddy Car Key Replacement provides magnetic lock installation service in Bell as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Magnetic Lock Installation
- Area
- Bell, Los Angeles County, CA (90201)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our magnetic lock installation service
- Who uses this service
- Reasons to call for magnetic lock installation service
- Magnetic Lock Installation across Bell
- How our magnetic lock installation service works
- Typical calls we receive
- Equipment and hardware on the van
- A short glossary
- Cost factors for magnetic lock installation service
- Why Bell customers choose Big Daddy
- Practical advice from our locksmiths
- Doing it yourself versus calling a professional
- Our service standards
- Choosing a locksmith: a short checklist
- How to prepare for the visit
- Aftercare and records
- Related locksmith services in Bell
- Magnetic Lock Installation near Bell
- Magnetic Lock Installation in Bell: frequently asked questions
About our magnetic lock installation service
Installing maglocks for controlled entry doors. A maglock holds a door with an electromagnet, commonly rated at 600 or 1,200 pounds, and releases when power is cut. Because it is fail-safe, code requires reliable ways to get out: typically a motion sensor and a push-to-exit button, plus release on fire alarm. We install maglocks with the required egress devices.

Electronic locks replace the question "who has a key?" with a list you control. Our magnetic lock installation service in Bell covers the whole range, from a single keypad deadbolt on a front door to networked readers on a commercial building, installed correctly and set up so you can manage it yourself.
Who uses this service
Electronic lock and access control customers in Bell range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Bell.
Reasons to call for magnetic lock installation service
If any of the following sounds familiar, magnetic lock installation service is likely what you need:
- A glass or aluminum door has no room for a strike
- A gate needs electric locking
- You need a door that releases on fire alarm
- An existing maglock no longer holds
Magnetic Lock Installation across Bell
Located in Los Angeles County, Bell is an incorporated city within our Gateway Cities service area. Customers anywhere in Bell, including the Gage Avenue corridor, the Atlantic Avenue corridor, and the Florence Avenue corridor, can have a mobile technician sent directly to them. Service is available throughout ZIP code 90201.
Bell is a compact, densely populated city of small homes, back units and apartment buildings, where landlords and families commonly ask for rekeys, deadbolts and security door locks.
If you are out and about near the James George Bell House, Bell Community Center, Veterans Memorial Park, or the Atlantic Avenue business district, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Bell follows I-710, Atlantic Avenue, Gage Avenue, Florence Avenue, and Eastern Avenue. You get a realistic arrival estimate when you call.
How our magnetic lock installation service works
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- A smart lock reports "jammed" every evening when the door swells.
- A short-term rental needs a new code for every guest.
- Children get home from school before their parents and keep losing keys.
- A business needs to know who entered the stockroom and when.
- An apartment building wants to replace a shared entry key with fobs.
- An office wants to stop rekeying each time an employee leaves.
- A homeowner wants to let a contractor in while at work.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Audit trail
- A stored record of which credential opened a door and when.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
Cost factors for magnetic lock installation service
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Bell customers choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Practical advice from our locksmiths
- Give each person their own code or credential so access can be removed individually.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Review the user list every few months and remove anyone who no longer needs access.
- Keep firmware up to date. Updates often fix security issues.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Turn on two-factor authentication for any account that can unlock your door.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
Doing it yourself versus calling a professional
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Bell
Customers who need magnetic lock installation service often ask about these as well. Each can usually be handled in the same visit to Bell.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- App-Controlled Lock Setup
Configuring locks that can be controlled by mobile apps.
- Audit Trail Lock Systems
Installing locks that track access history.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Access Code Programming
Adding, removing or changing access codes.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Buzzer System Installation
Installing entry buzzers for offices, apartments and secured entrances.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
Magnetic Lock Installation near Bell
We provide the same magnetic lock installation service in the communities around Bell. See the main magnetic lock installation page or the full list of service areas.
- Magnetic Lock Installation in Maywood
- Magnetic Lock Installation in Cudahy
- Magnetic Lock Installation in South Gate
- Magnetic Lock Installation in Huntington Park
- Magnetic Lock Installation in Bell Gardens
- Magnetic Lock Installation in Commerce
- Magnetic Lock Installation in Vernon
- Magnetic Lock Installation in East Los Angeles
- Magnetic Lock Installation in Lynwood
- Magnetic Lock Installation in Downey
- Magnetic Lock Installation in Montebello
- Magnetic Lock Installation in Pico Rivera
Magnetic Lock Installation in Bell: frequently asked questions
Do maglocks unlock when the power goes out?
Yes. Maglocks are fail-safe and release without power. A battery backup keeps the door secured during outages while still allowing people to exit.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Which smart lock is best for a home in Bell?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Can you make car keys in Bell?
Yes. We cut and program car keys on site anywhere in Bell, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Bell do you serve?
All of Bell, including the Gage Avenue corridor, the Atlantic Avenue corridor, and the Florence Avenue corridor, and addresses in ZIP code 90201.
How long does it take a locksmith to reach me in Bell?
It depends on where the nearest technician is and on traffic along I-710, Atlantic Avenue, or Gage Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
