Quick answer
Exit Device Installation: Installing code-compliant exit devices for commercial emergency exits. Big Daddy Car Key Replacement provides exit device installation service in Bell Gardens as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Exit Device Installation
- Area
- Bell Gardens, Los Angeles County, CA (90201)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What exit device installation involves
- Who we help in Bell Gardens
- Signs you need exit device installation service
- Exit Device Installation across Bell Gardens
- What happens when you call
- Typical calls we receive
- Equipment and hardware on the van
- Trade terms explained
- What affects the cost of exit device installation service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Why this is a job for a locksmith
- How we work on every job
- Choosing a locksmith: a short checklist
- What to have ready when you call
- After the visit
- Related locksmith services in Bell Gardens
- Exit Device Installation near Bell Gardens
- Exit Device Installation in Bell Gardens: frequently asked questions
What exit device installation involves
Installing code-compliant exit devices for commercial emergency exits. Exit device is the industry term for panic and fire exit hardware. Choosing one means matching device type to the door: rim devices for single doors, vertical rods or a mullion for pairs, mortise devices for heavy-use openings, and fire-rated devices without mechanical dogging on fire doors.

Commercial lock problems cost money by the hour: a store that cannot open, a back door that will not secure, keys in the pockets of former staff. For exit device installation service in Bell Gardens, we send technicians who work with commercial-grade hardware every day and who understand fire, egress and accessibility requirements.
Who we help in Bell Gardens
Our commercial customers in Bell Gardens include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Bell Gardens.
Signs you need exit device installation service
These are the most common reasons customers in Bell Gardens ask for exit device installation service:
- A pair of doors needs compliant exit hardware
- A fire-rated door has non-rated hardware
- You want delayed egress or an exit alarm
- New construction needs hardware set to plan
Exit Device Installation across Bell Gardens
Located in Los Angeles County, Bell Gardens is an incorporated city within our Gateway Cities service area. We cover every part of Bell Gardens, including the Eastern Avenue corridor, the Florence Avenue corridor, and the Garfield Avenue corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP code 90201.
Bell Gardens is one of the most densely populated cities in the region, with many multi-unit lots, so tenant lockouts, unit rekeys and car keys for street-parked vehicles are everyday work.
If you are out and about near The Bicycle Hotel & Casino, John Anson Ford Park, Bell Gardens Veterans Park, or the Los Angeles River bike path, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Bell Gardens by I-710, I-5, Eastern Avenue, Florence Avenue, Garfield Avenue, and Gage Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
What happens when you call
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- The back door shows pry marks around the latch after the weekend.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- The storefront door will not latch and the shop cannot be left for the night.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A closer has failed and the front door slams hard enough to rattle the glass.
- A manager is let go and returns only some of the keys issued.
Equipment and hardware on the van
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
What affects the cost of exit device installation service
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Bell Gardens.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Advice worth knowing
- Store spare keys in a locked key cabinet, not a desk drawer.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Consider keypad or card access for doors with frequent staff turnover.
- Give each employee access only to the doors their job requires.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Bell Gardens
Customers who need exit device installation service often ask about these as well. Each can usually be handled in the same visit to Bell Gardens.
- Storefront Lock Replacement
Replacing mortise locks, hook bolts, paddle handles, thumb turns and commercial cylinders.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Commercial Door Hardware Repair
Repairing commercial handles, hinges, closers, locks, latches, strikes, pivots and door frames.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles County and Ventura County.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
Exit Device Installation near Bell Gardens
We provide the same exit device installation service in the communities around Bell Gardens. See the main exit device installation page or the full list of service areas.
- Exit Device Installation in Cudahy
- Exit Device Installation in Downey
- Exit Device Installation in Bell
- Exit Device Installation in Maywood
- Exit Device Installation in Commerce
- Exit Device Installation in Pico Rivera
- Exit Device Installation in South Gate
- Exit Device Installation in Santa Fe Springs
- Exit Device Installation in Montebello
- Exit Device Installation in Lynwood
- Exit Device Installation in East Los Angeles
- Exit Device Installation in Huntington Park
Exit Device Installation in Bell Gardens: frequently asked questions
What is the difference between panic hardware and fire exit hardware?
Both open with a push bar. Fire exit hardware is additionally tested and labeled for fire doors and cannot be mechanically dogged open, so the door always latches during a fire.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Can you work outside our business hours in Bell Gardens?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Can you make car keys in Bell Gardens?
Yes. We cut and program car keys on site anywhere in Bell Gardens, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How long does it take a locksmith to reach me in Bell Gardens?
It depends on where the nearest technician is and on traffic along I-710, I-5, or Eastern Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Is there a travel charge for Bell Gardens?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Bell Gardens, so you know the cost in advance.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
