Quick answer
Keypad Lock Programming: Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors. Big Daddy Car Key Replacement provides keypad lock programming service in Beverly Hills as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Keypad Lock Programming
- Area
- Beverly Hills, Los Angeles County, CA (90210, 90211, 90212)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our keypad lock programming service
- Who we help in Beverly Hills
- Reasons to call for keypad lock programming service
- Keypad Lock Programming across Beverly Hills
- How our keypad lock programming service works
- Common situations in Beverly Hills
- Equipment and hardware on the van
- Terms worth knowing
- How keypad lock programming service is priced
- Why Beverly Hills customers choose Big Daddy
- Advice worth knowing
- Professional service compared with doing it yourself
- How we work on every job
- Choosing a locksmith: a short checklist
- What to have ready when you call
- After the visit
- Related locksmith services in Beverly Hills
- Keypad Lock Programming near Beverly Hills
- Keypad Lock Programming in Beverly Hills: frequently asked questions
About our keypad lock programming service
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors. Codes should be personal and temporary where possible: one per person, removed when no longer needed. We program master and user codes, set auto-lock timing, schedule or one-time codes on models that support them, and remove any default codes that shipped with the lock.

Codes, cards, fobs and phones have made keys optional. For keypad lock programming service in Beverly Hills, call (562) 550-7206. We help you choose equipment that fits the door and the way people use it, install it, and make sure there is always a way in if batteries or power fail.
Who we help in Beverly Hills
Electronic lock and access control customers in Beverly Hills range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Beverly Hills.
Reasons to call for keypad lock programming service
If any of the following sounds familiar, keypad lock programming service is likely what you need:
- You do not know the programming code
- A contractor’s code should be removed
- Everyone shares one code
- The manual is lost and settings need changing
Keypad Lock Programming across Beverly Hills
Located in Los Angeles County, Beverly Hills is an incorporated city within our Westside service area. Our keypad lock programming service reaches all of Beverly Hills, including The Flats, Trousdale Estates, the Golden Triangle, Beverly Hills Gateway, and the area south of Wilshire, as well as the streets in between. You do not need to bring anything to a shop. We serve the 90210, 90211, and 90212 ZIP codes.
Beverly Hills combines landmark estates, luxury retail and medical and office towers, so the work leans toward high-security and restricted keyways, safes, commercial hardware and keys for European vehicles.
Whether you are at home, at work, or stuck near Rodeo Drive, Beverly Hills City Hall, Beverly Gardens Park, Greystone Mansion, or The Beverly Hills Hotel, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Beverly Hills follows Santa Monica Boulevard, Wilshire Boulevard, Sunset Boulevard, Olympic Boulevard, Beverly Drive, and Coldwater Canyon Drive. You get a realistic arrival estimate when you call.
How our keypad lock programming service works
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Beverly Hills
- An apartment building wants to replace a shared entry key with fobs.
- Children get home from school before their parents and keep losing keys.
- A homeowner wants to let a contractor in while at work.
- An office wants to stop rekeying each time an employee leaves.
- A short-term rental needs a new code for every guest.
- A business needs to know who entered the stockroom and when.
- A smart lock reports "jammed" every evening when the door swells.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Terms worth knowing
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Audit trail
- A stored record of which credential opened a door and when.
How keypad lock programming service is priced
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Beverly Hills customers choose Big Daddy
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Beverly Hills.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Advice worth knowing
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Turn on two-factor authentication for any account that can unlock your door.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Review the user list every few months and remove anyone who no longer needs access.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Delete factory default codes on the day of installation.
- Give each person their own code or credential so access can be removed individually.
Professional service compared with doing it yourself
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Beverly Hills
Customers who need keypad lock programming service often ask about these as well. Each can usually be handled in the same visit to Beverly Hills.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Keyless Entry Installation
Installing keyless entry systems for doors and gates.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Audit Trail Lock Systems
Installing locks that track access history.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Smart Locks & Keyless Entry
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up.
- Key Fob Access Systems
Installing and programming key fob systems.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles County and Ventura County.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
Keypad Lock Programming near Beverly Hills
We provide the same keypad lock programming service in the communities around Beverly Hills. See the main keypad lock programming page or the full list of service areas.
- Keypad Lock Programming in West Hollywood
- Keypad Lock Programming in Culver City
- Keypad Lock Programming in Studio City
- Keypad Lock Programming in Ladera Heights
- Keypad Lock Programming in Sherman Oaks
- Keypad Lock Programming in Toluca Lake
- Keypad Lock Programming in View Park–Windsor Hills
- Keypad Lock Programming in Valley Village
- Keypad Lock Programming in Santa Monica
- Keypad Lock Programming in Marina del Rey
- Keypad Lock Programming in North Hollywood
- Keypad Lock Programming in Valley Glen
Keypad Lock Programming in Beverly Hills: frequently asked questions
I lost the programming code for my keypad lock. Can it be reset?
Yes. Most keypad locks have a reset procedure from inside the door that restores factory settings, after which new master and user codes are programmed.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Which smart lock is best for a home in Beverly Hills?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Do you have a locksmith shop in Beverly Hills?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Beverly Hills and the rest of the Westside area. All work is done at your location.
Are you open 24 hours in Beverly Hills?
Yes. We take calls and dispatch to Beverly Hills 24 hours a day, including weekends and holidays.
How long does it take a locksmith to reach me in Beverly Hills?
It depends on where the nearest technician is and on traffic along Santa Monica Boulevard, Wilshire Boulevard, or Sunset Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
