Quick answer
Rim Cylinder Replacement: Replacing rim cylinders used with panic bars, exit devices and commercial doors. Big Daddy Car Key Replacement provides rim cylinder replacement service in Beverly Hills as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Rim Cylinder Replacement
- Area
- Beverly Hills, Los Angeles County, CA (90210, 90211, 90212)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What rim cylinder replacement means
- Who uses this service
- Reasons to call for rim cylinder replacement service
- Rim Cylinder Replacement across Beverly Hills
- How our rim cylinder replacement service works
- Common situations in Beverly Hills
- What our technicians bring
- Trade terms explained
- Cost factors for rim cylinder replacement service
- What you can expect from us
- Tips to avoid problems
- Professional service compared with doing it yourself
- What we commit to
- Questions to ask any locksmith
- Before you call (562) 550-7206
- Once the work is done
- Related locksmith services in Beverly Hills
- Rim Cylinder Replacement near Beverly Hills
- Rim Cylinder Replacement in Beverly Hills: frequently asked questions
What rim cylinder replacement means
Replacing rim cylinders used with panic bars, exit devices and commercial doors. A rim cylinder mounts through the door from the outside and drives a surface-mounted device, most often a panic bar, with a flat tailpiece. Replacing it changes the key for outside entry without touching the exit device. It is the standard fix when a back-door key is lost or a keyholder leaves.

A business door has three jobs: keep the wrong people out, let everyone inside get out safely, and survive thousands of cycles a week. Our rim cylinder replacement service in Beverly Hills covers all three, from storefront locks and exit devices to master key systems, with work scheduled around your hours of operation.
Who uses this service
Our commercial customers in Beverly Hills include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Beverly Hills.
Reasons to call for rim cylinder replacement service
If any of the following sounds familiar, rim cylinder replacement service is likely what you need:
- The key for the panic-bar door is lost
- The outside cylinder is loose or spinning
- You want the exit door on your master key
- The cylinder was attacked or damaged
Rim Cylinder Replacement across Beverly Hills
Located in Los Angeles County, Beverly Hills is an incorporated city within our Westside service area. Our rim cylinder replacement service reaches all of Beverly Hills, including The Flats, Trousdale Estates, the Golden Triangle, Beverly Hills Gateway, and the area south of Wilshire, as well as the streets in between. You do not need to bring anything to a shop. We serve the 90210, 90211, and 90212 ZIP codes.
Beverly Hills combines landmark estates, luxury retail and medical and office towers, so the work leans toward high-security and restricted keyways, safes, commercial hardware and keys for European vehicles.
Whether you are at home, at work, or stuck near Rodeo Drive, Beverly Hills City Hall, Beverly Gardens Park, Greystone Mansion, or The Beverly Hills Hotel, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Beverly Hills follows Santa Monica Boulevard, Wilshire Boulevard, Sunset Boulevard, Olympic Boulevard, Beverly Drive, and Coldwater Canyon Drive. You get a realistic arrival estimate when you call.
How our rim cylinder replacement service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Beverly Hills
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A manager is let go and returns only some of the keys issued.
- The storefront door will not latch and the shop cannot be left for the night.
- The back door shows pry marks around the latch after the weekend.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A closer has failed and the front door slams hard enough to rattle the glass.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
Cost factors for rim cylinder replacement service
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Beverly Hills.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Tips to avoid problems
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Give each employee access only to the doors their job requires.
- Consider keypad or card access for doors with frequent staff turnover.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Beverly Hills
Customers who need rim cylinder replacement service often ask about these as well. Each can usually be handled in the same visit to Beverly Hills.
- Exit Device Repair
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim.
- Exit Device Installation
Installing code-compliant exit devices for commercial emergency exits.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Commercial Door Hardware Repair
Repairing commercial handles, hinges, closers, locks, latches, strikes, pivots and door frames.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
Rim Cylinder Replacement near Beverly Hills
We provide the same rim cylinder replacement service in the communities around Beverly Hills. See the main rim cylinder replacement page or the full list of service areas.
- Rim Cylinder Replacement in West Hollywood
- Rim Cylinder Replacement in Culver City
- Rim Cylinder Replacement in Studio City
- Rim Cylinder Replacement in Ladera Heights
- Rim Cylinder Replacement in Sherman Oaks
- Rim Cylinder Replacement in Toluca Lake
- Rim Cylinder Replacement in View Park–Windsor Hills
- Rim Cylinder Replacement in Valley Village
- Rim Cylinder Replacement in Santa Monica
- Rim Cylinder Replacement in Marina del Rey
- Rim Cylinder Replacement in North Hollywood
- Rim Cylinder Replacement in Valley Glen
Rim Cylinder Replacement in Beverly Hills: frequently asked questions
What is a rim cylinder?
It is a lock cylinder that passes through the door and is held by two bolts from the inside, turning a flat tailpiece. It operates rim exit devices and surface-mounted deadlocks from the outside.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Can you work outside our business hours in Beverly Hills?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Do you have a locksmith shop in Beverly Hills?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Beverly Hills and the rest of the Westside area. All work is done at your location.
Is there a travel charge for Beverly Hills?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Beverly Hills, so you know the cost in advance.
Which parts of Beverly Hills do you serve?
All of Beverly Hills, including The Flats, Trousdale Estates, the Golden Triangle, and Beverly Hills Gateway, and addresses in ZIP codes 90210, 90211, and 90212.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
