Quick answer
Big Daddy Car Key Replacement cuts and programs Hummer keys on site in Burbank, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- Hummer
- Model years covered
- 1990–2026
- Models covered
- 3
- Service area
- Burbank, CA
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your vehicle
- Phone
- (562) 550-7206
On this page
- Hummer car keys made and programmed on site
- Hummer models we make keys for
- Types of Hummer keys
- How Hummer key and immobilizer systems work
- Common Hummer key and lock problems
- All keys lost or just need a spare?
- Stranded with your Hummer right now?
- Hummer key replacement across Burbank
- Getting a Hummer key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Hummer key?
- What affects the cost of a Hummer key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Burbank choose Big Daddy
- Looking after your Hummer key
- Choosing a car locksmith you can trust
- Other makes
- Related automotive locksmith services in Burbank
- Hummer keys near Burbank
- Hummer key replacement in Burbank: frequently asked questions
Hummer car keys made and programmed on site
Big Daddy Car Key Replacement cuts and programs Hummer keys in Burbank for 3 models spanning model years 1990 to 2026. A mobile technician comes to the vehicle, verifies ownership, cuts the key to factory code and programs it to the car. The H2 and H3 share GM truck electronics of their era, so earlier models rely on Passlock and later ones on transponder keys. The military-derived H1 uses simple mechanical keys.

Hummer models we make keys for
Choose a model to see its key types by year and a page for every model year.
Types of Hummer keys
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds. For the Hummer we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Hummer we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.
How Hummer key and immobilizer systems work
General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.
Common Hummer key and lock problems
These are the issues we see most often on Hummer vehicles in Burbank:
- Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
- Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
- Flip-key blades that loosen or snap at the hinge
- Proximity fobs that stop being detected after a battery or module replacement
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Hummer right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Hummer key replacement across Burbank
Burbank is an incorporated city in Los Angeles County, part of the Burbank, Glendale & Foothills area we cover every day. We cover every part of Burbank, including Magnolia Park, the Media District, the Rancho Equestrian District, Downtown Burbank, and the Burbank Hills. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 91501, 91502, 91504, 91505, and 91506.
Burbank blends studio lots and media offices with tidy 1930s-to-1950s bungalows and hillside homes, so production-office master keys and vintage residential hardware are both familiar work.
Whether you are at home, at work, or stuck near Warner Bros. Studios, Walt Disney Studios, Hollywood Burbank Airport, Burbank Town Center, or the Empire Center, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Burbank by I-5, SR-134, Olive Avenue, Magnolia Boulevard, Burbank Boulevard, and Victory Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a Hummer key made, step by step
Call with the year, make and model
Tell us you need a key for a Hummer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Hummer key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a Hummer key
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Situations we are called to most often
- The dash reads "key not detected" and the start button does nothing.
- A hardware-store copy opens the door but the engine will not start.
- The key fob went through the washing machine.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers in Burbank choose Big Daddy
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Looking after your Hummer key
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
Choosing a car locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
Other makes
- Acura keys
- Alfa Romeo keys
- Audi keys
- BMW keys
- Buick keys
- Cadillac keys
- Chevrolet keys
- Chrysler keys
- Dodge keys
- Fiat keys
- Ford keys
- Genesis keys
- GMC keys
- Honda keys
- Hyundai keys
- Infiniti keys
- Isuzu keys
- Jaguar keys
- Jeep keys
- Kia keys
- Land Rover keys
- Lexus keys
- Lincoln keys
- Mazda keys
- Mercedes-Benz keys
- Mercury keys
- Mini keys
- Mitsubishi keys
- Nissan keys
- Oldsmobile keys
- Pontiac keys
- Porsche keys
- Ram keys
- Saturn keys
- Scion keys
- Subaru keys
- Suzuki keys
- Tesla keys
- Toyota keys
- Volkswagen keys
- Volvo keys
Related automotive locksmith services in Burbank
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Key Fob Programming
Programming new or replacement key fobs.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
Hummer keys near Burbank
We make Hummer keys in the communities around Burbank as well. See the main Hummer key replacement page or the Burbank locksmith page.
- Hummer keys in Toluca Lake
- Hummer keys in Glendale
- Hummer keys in North Hollywood
- Hummer keys in Sun Valley
- Hummer keys in Valley Village
- Hummer keys in Studio City
- Hummer keys in La Cañada Flintridge
- Hummer keys in Valley Glen
- Hummer keys in West Hollywood
- Hummer keys in Lake View Terrace
- Hummer keys in Van Nuys
- Hummer keys in Arleta
Hummer key replacement in Burbank: frequently asked questions
Why is the security light flashing on my Hummer and the engine will not start?
The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.
Can a Hummer key be programmed without going to the dealer?
Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.
Can you unlock my Hummer if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Can you make a key for a Hummer if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Does car insurance cover a replacement Hummer key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Will my lost Hummer key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
What do you need from me to make a Hummer key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Do you also repair the ignition on a Hummer?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Is a locksmith-made Hummer key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make car keys in Burbank?
Yes. We cut and program car keys on site anywhere in Burbank, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Burbank do you serve?
All of Burbank, including Magnolia Park, the Media District, the Rancho Equestrian District, and Downtown Burbank, and addresses in ZIP codes 91501, 91502, 91504, 91505, and 91506.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
