Quick answer
Keypad Lock Programming: Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors. Big Daddy Car Key Replacement provides keypad lock programming service in Calabasas as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Keypad Lock Programming
- Area
- Calabasas, Los Angeles County, CA (91302)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our keypad lock programming service
- Customers we serve in Calabasas
- Reasons to call for keypad lock programming service
- Keypad Lock Programming across Calabasas
- Our keypad lock programming process, step by step
- Typical calls we receive
- What our technicians bring
- A short glossary
- Cost factors for keypad lock programming service
- Why Calabasas customers choose Big Daddy
- Tips to avoid problems
- Doing it yourself versus calling a professional
- What we commit to
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Once the work is done
- Related locksmith services in Calabasas
- Keypad Lock Programming near Calabasas
- Keypad Lock Programming in Calabasas: frequently asked questions
About our keypad lock programming service
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors. Codes should be personal and temporary where possible: one per person, removed when no longer needed. We program master and user codes, set auto-lock timing, schedule or one-time codes on models that support them, and remove any default codes that shipped with the lock.

Electronic locks replace the question "who has a key?" with a list you control. Our keypad lock programming service in Calabasas covers the whole range, from a single keypad deadbolt on a front door to networked readers on a commercial building, installed correctly and set up so you can manage it yourself.
Customers we serve in Calabasas
Electronic lock and access control customers in Calabasas range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Calabasas.
Reasons to call for keypad lock programming service
People in Calabasas usually call us for keypad lock programming service in situations like these:
- You do not know the programming code
- A contractor’s code should be removed
- Everyone shares one code
- The manual is lost and settings need changing
Keypad Lock Programming across Calabasas
Calabasas is an incorporated city in Los Angeles County, part of the Las Virgenes & Malibu area we cover every day. We cover every part of Calabasas, including The Oaks, Calabasas Park, Mulholland Heights, Mountain View Estates, Calabasas Hills, and Old Town Calabasas. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91302 ZIP code.
Calabasas is known for guard-gated communities and custom estates, where homeowners expect high-security cylinders, smart locks tied into home automation and proximity keys for luxury vehicles.
Whether you are at home, at work, or stuck near The Commons at Calabasas, Old Town Calabasas and the Leonis Adobe, Calabasas Lake, or Malibu Creek State Park, tell the dispatcher the nearest landmark and we will find you. Calabasas is served by US-101, Las Virgenes Road, Mulholland Highway, Calabasas Road, Parkway Calabasas, and Valley Circle Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our keypad lock programming process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- A business needs to know who entered the stockroom and when.
- A short-term rental needs a new code for every guest.
- Children get home from school before their parents and keep losing keys.
- A smart lock reports "jammed" every evening when the door swells.
- An apartment building wants to replace a shared entry key with fobs.
- An office wants to stop rekeying each time an employee leaves.
- A homeowner wants to let a contractor in while at work.
What our technicians bring
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Audit trail
- A stored record of which credential opened a door and when.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
Cost factors for keypad lock programming service
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Calabasas. The technician confirms the figure before starting.
Why Calabasas customers choose Big Daddy
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Tips to avoid problems
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Give each person their own code or credential so access can be removed individually.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Turn on two-factor authentication for any account that can unlock your door.
- Delete factory default codes on the day of installation.
- Review the user list every few months and remove anyone who no longer needs access.
Doing it yourself versus calling a professional
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Calabasas
Customers who need keypad lock programming service often ask about these as well. Each can usually be handled in the same visit to Calabasas.
- Electric Strike Installation
Installing electric strikes for buzz-in entry systems.
- Smart Locks & Keyless Entry
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up.
- Keyless Entry Installation
Installing keyless entry systems for doors and gates.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Access Code Programming
Adding, removing or changing access codes.
- Intercom Lock Integration
Connecting locks with intercom systems for controlled entry.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
Keypad Lock Programming near Calabasas
We provide the same keypad lock programming service in the communities around Calabasas. See the main keypad lock programming page or the full list of service areas.
- Keypad Lock Programming in Hidden Hills
- Keypad Lock Programming in Woodland Hills
- Keypad Lock Programming in West Hills
- Keypad Lock Programming in Topanga
- Keypad Lock Programming in Canoga Park
- Keypad Lock Programming in Agoura Hills
- Keypad Lock Programming in Tarzana
- Keypad Lock Programming in Winnetka
- Keypad Lock Programming in Westlake Village
- Keypad Lock Programming in Reseda
- Keypad Lock Programming in Chatsworth
- Keypad Lock Programming in Encino
Keypad Lock Programming in Calabasas: frequently asked questions
I lost the programming code for my keypad lock. Can it be reset?
Yes. Most keypad locks have a reset procedure from inside the door that restores factory settings, after which new master and user codes are programmed.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Are you open 24 hours in Calabasas?
Yes. We take calls and dispatch to Calabasas 24 hours a day, including weekends and holidays.
Which parts of Calabasas do you serve?
All of Calabasas, including The Oaks, Calabasas Park, Mulholland Heights, and Mountain View Estates, and addresses in ZIP code 91302.
Do you have a locksmith shop in Calabasas?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Calabasas and the rest of the Las Virgenes & Malibu area. All work is done at your location.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
