Quick answer
Mortise Lock Repair: Repairing or replacing worn, jammed or damaged mortise lock systems. Big Daddy Car Key Replacement provides mortise lock repair service in Camarillo as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Mortise Lock Repair
- Area
- Camarillo, Ventura County, CA (93010, 93012)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our mortise lock repair service
- Who uses this service
- When you need mortise lock repair service
- Mortise Lock Repair across Camarillo
- What happens when you call
- Situations we handle regularly
- What our technicians bring
- A short glossary
- What affects the cost of mortise lock repair service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Why this is a job for a locksmith
- Our service standards
- Choosing a locksmith: a short checklist
- How to prepare for the visit
- Aftercare and records
- Related locksmith services in Camarillo
- Mortise Lock Repair near Camarillo
- Mortise Lock Repair in Camarillo: frequently asked questions
About our mortise lock repair service
Repairing or replacing worn, jammed or damaged mortise lock systems. Mortise locks are built to be rebuilt. Springs, hubs, latches and deadbolt assemblies can be replaced individually, which matters on older buildings where a new lock would not fit the existing pocket. We open the case, replace worn parts, clean and lubricate, and reset the cylinder cam and trim.

A business door has three jobs: keep the wrong people out, let everyone inside get out safely, and survive thousands of cycles a week. Our mortise lock repair service in Camarillo covers all three, from storefront locks and exit devices to master key systems, with work scheduled around your hours of operation.
Who uses this service
Our commercial customers in Camarillo include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Camarillo.
When you need mortise lock repair service
These are the most common reasons customers in Camarillo ask for mortise lock repair service:
- The lever droops or the latch drags
- The deadbolt will not throw with the key
- The thumbturn or lever spins freely
- An antique mortise lock has stopped working
Mortise Lock Repair across Camarillo
Camarillo is an incorporated city in Ventura County, part of the area we cover every day. Customers anywhere in Camarillo, including Mission Oaks, Spanish Hills, Las Posas Estates, Village at the Park, Old Town Camarillo, and Leisure Village, can have a mobile technician sent directly to them. That includes addresses in ZIP codes 93010 and 93012.
Camarillo is a comfortable mid-county city with a large outlet center, an airport business park and several retirement communities, where easy-to-use lever locks and keypad entry are popular upgrades.
If you are out and about near Camarillo Premium Outlets, Camarillo Airport, CSU Channel Islands, Old Town Camarillo, or the Camarillo Ranch House, give us that location when you call and wait somewhere safe and visible. Camarillo is served by US-101, Lewis Road, Las Posas Road, Carmen Drive, Pleasant Valley Road, and Santa Rosa Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
What happens when you call
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A manager is let go and returns only some of the keys issued.
- A closer has failed and the front door slams hard enough to rattle the glass.
- The back door shows pry marks around the latch after the weekend.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- The storefront door will not latch and the shop cannot be left for the night.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
What affects the cost of mortise lock repair service
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Camarillo. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Camarillo.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Advice worth knowing
- Store spare keys in a locked key cabinet, not a desk drawer.
- Consider keypad or card access for doors with frequent staff turnover.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Give each employee access only to the doors their job requires.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Camarillo
Customers who need mortise lock repair service often ask about these as well. Each can usually be handled in the same visit to Camarillo.
- Exit Device Installation
Installing code-compliant exit devices for commercial emergency exits.
- Warehouse Locksmith Service
Heavy-duty locks, roll-up door locks, padlocks, access control and master key systems.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Exit Device Repair
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim.
- File Cabinet Lock Replacement
Replacing locks on filing cabinets, desks and office storage.
- Commercial Door Hardware Repair
Repairing commercial handles, hinges, closers, locks, latches, strikes, pivots and door frames.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles, Ventura and Orange County.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
Mortise Lock Repair near Camarillo
We provide the same mortise lock repair service in the communities around Camarillo. See the main mortise lock repair page or the full list of service areas.
- Mortise Lock Repair in Oxnard
- Mortise Lock Repair in Santa Paula
- Mortise Lock Repair in Moorpark
- Mortise Lock Repair in Port Hueneme
- Mortise Lock Repair in Ventura
- Mortise Lock Repair in Thousand Oaks
- Mortise Lock Repair in Westlake Village
- Mortise Lock Repair in Fillmore
- Mortise Lock Repair in Simi Valley
- Mortise Lock Repair in Agoura Hills
- Mortise Lock Repair in Malibu
- Mortise Lock Repair in Ojai
Mortise Lock Repair in Camarillo: frequently asked questions
Can an old mortise lock be repaired instead of replaced?
Very often. Most failures are a broken spring or worn hub, both replaceable. Repair keeps the original door prep and trim, which is important on historic doors where modern locks would not fit.
Can you work outside our business hours in Camarillo?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
How long does it take a locksmith to reach me in Camarillo?
It depends on where the nearest technician is and on traffic along US-101, Lewis Road, or Las Posas Road. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Can you make car keys in Camarillo?
Yes. We cut and program car keys on site anywhere in Camarillo, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Are you open 24 hours in Camarillo?
Yes. We take calls and dispatch to Camarillo 24 hours a day, including weekends and holidays.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
