Quick answer
Commercial Lock Change: Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas. Big Daddy Car Key Replacement provides commercial lock change service in Canoga Park as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Lock Change
- Area
- Canoga Park, Los Angeles County, CA (91303, 91304)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our commercial lock change service
- Who we help in Canoga Park
- Signs you need commercial lock change service
- Commercial Lock Change across Canoga Park
- How our commercial lock change service works
- Common situations in Canoga Park
- What our technicians bring
- Terms worth knowing
- What affects the cost of commercial lock change service
- What you can expect from us
- Advice worth knowing
- Why this is a job for a locksmith
- Our service standards
- How to choose a locksmith you can trust
- What to have ready when you call
- Once the work is done
- Related locksmith services in Canoga Park
- Commercial Lock Change near Canoga Park
- Commercial Lock Change in Canoga Park: frequently asked questions
About our commercial lock change service
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas. A commercial lock change swaps worn or underrated hardware for locks that match the door’s use. Entry doors get Grade 1 levers or mortise locks, storerooms get storeroom-function locks that are always locked from outside, and offices get entry-function sets. Choosing the right function prevents doors being left unlocked by accident.

Every business in Canoga Park eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our commercial lock change service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who we help in Canoga Park
Our commercial customers in Canoga Park include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Canoga Park.
Signs you need commercial lock change service
These are the most common reasons customers in Canoga Park ask for commercial lock change service:
- Levers are loose or sagging on busy doors
- A residential lock was installed on a commercial door
- A back door was pried or damaged
- Locks do not match the way rooms are used
Commercial Lock Change across Canoga Park
Canoga Park is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Customers anywhere in Canoga Park, including Old Town Canoga Park, the Sherman Way antique row, the Warner Center edge, and the Owensmouth corridor, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 91303 and 91304.
Canoga Park mixes mid-century ranch homes, large apartment complexes and a busy light-industrial and auto-repair district, so calls range from storefront hardware to transponder keys for daily drivers.
People call us from all over Canoga Park, including the areas around Westfield Topanga & The Village, Madrid Theatre, the Los Angeles River headwaters, and Canoga Park High School. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Canoga Park follows US-101, Topanga Canyon Boulevard, Sherman Way, Vanowen Street, De Soto Avenue, and Roscoe Boulevard. You get a realistic arrival estimate when you call.
How our commercial lock change service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Canoga Park
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- A manager is let go and returns only some of the keys issued.
- The back door shows pry marks around the latch after the weekend.
- The storefront door will not latch and the shop cannot be left for the night.
- A closer has failed and the front door slams hard enough to rattle the glass.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Terms worth knowing
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
What affects the cost of commercial lock change service
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Canoga Park. The technician confirms the figure before starting.
What you can expect from us
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Canoga Park.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Advice worth knowing
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Give each employee access only to the doors their job requires.
- Consider keypad or card access for doors with frequent staff turnover.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
How to choose a locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Canoga Park
Customers who need commercial lock change service often ask about these as well. Each can usually be handled in the same visit to Canoga Park.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Automatic Door Closer Adjustment
Adjusting speed, latch, sweep and backcheck settings.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Mortise Lock Repair
Repairing or replacing worn, jammed or damaged mortise lock systems.
- Exit Device Repair
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Warehouse Locksmith Service
Heavy-duty locks, roll-up door locks, padlocks, access control and master key systems.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
Commercial Lock Change near Canoga Park
We provide the same commercial lock change service in the communities around Canoga Park. See the main commercial lock change page or the full list of service areas.
- Commercial Lock Change in Winnetka
- Commercial Lock Change in Woodland Hills
- Commercial Lock Change in West Hills
- Commercial Lock Change in Tarzana
- Commercial Lock Change in Reseda
- Commercial Lock Change in Chatsworth
- Commercial Lock Change in Northridge
- Commercial Lock Change in Hidden Hills
- Commercial Lock Change in Lake Balboa
- Commercial Lock Change in Calabasas
- Commercial Lock Change in Porter Ranch
- Commercial Lock Change in Encino
Commercial Lock Change in Canoga Park: frequently asked questions
What is a storeroom function lock?
A storeroom lock is always locked on the outside; the key retracts the latch but never leaves it unlocked. It suits supply rooms, IT closets and stock rooms where forgetting to lock up is a risk.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Can you work outside our business hours in Canoga Park?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Do you have a locksmith shop in Canoga Park?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Canoga Park and the rest of the San Fernando Valley area. All work is done at your location.
Can you make car keys in Canoga Park?
Yes. We cut and program car keys on site anywhere in Canoga Park, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Canoga Park do you serve?
All of Canoga Park, including Old Town Canoga Park, the Sherman Way antique row, the Warner Center edge, and the Owensmouth corridor, and addresses in ZIP codes 91303 and 91304.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
