Quick answer
The 1990 BMW 7 Series typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1990 BMW 7 Series keys on site in Carson, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1990 BMW 7 Series
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1990 BMW 7 Series use?
- How we make a 1990 BMW 7 Series key
- How BMW key and immobilizer systems work
- Common BMW key and lock problems
- All keys lost or just need a spare?
- Stranded with your BMW right now?
- 1990 BMW 7 Series key replacement across Carson
- Getting a 1990 BMW 7 Series key made, step by step
- What to have ready
- Mobile locksmith or dealership for a BMW key?
- What affects the cost of a 1990 BMW 7 Series key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Carson choose Big Daddy
- Looking after your BMW key
- Choosing a car locksmith you can trust
- Other BMW 7 Series years
- Other BMW models
- Related automotive locksmith services in Carson
- 1990 BMW 7 Series keys near Carson
- 1990 BMW 7 Series key replacement in Carson: frequently asked questions
What kind of key does a 1990 BMW 7 Series use?
The 1990 BMW 7 Series typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1990 BMW 7 Series key
For the 1990 BMW 7 Series we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1990 model year. For other years, see the BMW 7 Series key replacement overview, or browse all BMW models.
How BMW key and immobilizer systems work
BMW and Mini immobilizers are named for the module that holds the key data: EWS on cars from the mid-1990s, CAS from the mid-2000s, and FEM or BDC on later F- and G-series cars. Each key occupies one of a fixed number of slots and is individually encrypted to the car. Making a key means reading the module’s security data and writing a new key to a free slot.
BMW moved from EWS chip keys to the CAS slot-fob system in the mid-2000s and then to FEM and BDC modules with Comfort Access. Each generation needs different equipment, and the newest G-series cars often require a dealer-ordered key.
Common BMW key and lock problems
These are the issues we see most often on BMW vehicles in Carson:
- Comfort Access fobs that stop being detected as the internal battery ages
- Slot-type fobs that are not read by a worn ignition dock
- Lost keys on FEM and BDC cars, which require module programming
- G-series vehicles whose keys are dealer-order only
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your BMW right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1990 BMW 7 Series key replacement across Carson
Located in Los Angeles County, Carson is an incorporated city within our South Bay service area. Customers anywhere in Carson, including Dominguez Hills, the Avalon Boulevard corridor, the Carson Street corridor, and the industrial district near the 405, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 90745, 90746, and 90810.
Carson is a logistics powerhouse near the ports, with warehouses, truck yards and refineries surrounding suburban neighborhoods, so fleet keys, semi-truck lockouts and commercial hardware are a big share of the work.
Whether you are at home, at work, or stuck near Dignity Health Sports Park, California State University, Dominguez Hills, SouthBay Pavilion, or the Porsche Experience Center, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Carson by I-405, I-110, SR-91, I-710, Avalon Boulevard, and Carson Street. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a 1990 BMW 7 Series key made, step by step
Call with the year, make and model
Tell us you need a key for a 1990 BMW 7 Series, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a BMW key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1990 BMW 7 Series key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Situations we are called to most often
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key fob went through the washing machine.
- The dash reads "key not detected" and the start button does nothing.
- The key is locked in the trunk and the trunk release is disabled.
- A used car was sold with one worn key and no spare.
Why drivers in Carson choose Big Daddy
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Carson.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your BMW key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
Choosing a car locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
Other BMW 7 Series years
- 2026 7 Series
- 2025 7 Series
- 2024 7 Series
- 2023 7 Series
- 2022 7 Series
- 2021 7 Series
- 2020 7 Series
- 2019 7 Series
- 2018 7 Series
- 2017 7 Series
- 2016 7 Series
- 2015 7 Series
- 2014 7 Series
- 2013 7 Series
- 2012 7 Series
- 2011 7 Series
- 2010 7 Series
- 2009 7 Series
- 2008 7 Series
- 2007 7 Series
- 2006 7 Series
- 2005 7 Series
- 2004 7 Series
- 2003 7 Series
- 2002 7 Series
- 2001 7 Series
- 2000 7 Series
- 1999 7 Series
- 1998 7 Series
- 1997 7 Series
- 1996 7 Series
- 1995 7 Series
- 1994 7 Series
- 1993 7 Series
- 1992 7 Series
- 1991 7 Series
Other BMW models
- BMW 3 Series keys
- BMW 5 Series keys
- BMW X5 keys
- BMW Z4 keys
- BMW X3 keys
- BMW X6 keys
- BMW 6 Series keys
- BMW 8 Series keys
- BMW X1 keys
- BMW 2 Series keys
- BMW 4 Series keys
- BMW X4 keys
- BMW X2 keys
Related automotive locksmith services in Carson
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Spare Car Key
Creating duplicate or backup keys.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
1990 BMW 7 Series keys near Carson
We make 1990 BMW 7 Series keys in the communities around Carson as well. See the main 1990 BMW 7 Series key replacement page or the Carson locksmith page.
- 1990 BMW 7 Series keys in West Carson
- 1990 BMW 7 Series keys in Lomita
- 1990 BMW 7 Series keys in Torrance
- 1990 BMW 7 Series keys in Gardena
- 1990 BMW 7 Series keys in Rolling Hills Estates
- 1990 BMW 7 Series keys in Lawndale
- 1990 BMW 7 Series keys in Compton
- 1990 BMW 7 Series keys in Willowbrook
- 1990 BMW 7 Series keys in Redondo Beach
- 1990 BMW 7 Series keys in Athens
- 1990 BMW 7 Series keys in Palos Verdes Estates
- 1990 BMW 7 Series keys in Rolling Hills
1990 BMW 7 Series key replacement in Carson: frequently asked questions
Does a 1990 BMW 7 Series key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1990 BMW 7 Series key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My BMW key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Can a locksmith make a BMW key without the dealer?
For most EWS, CAS and FEM/BDC vehicles, yes. We read the security data and program a new key on site. The newest systems are restricted to dealer-supplied keys.
How many keys can a BMW have?
Typically up to ten key slots exist per car. A lost key’s slot can be disabled so it will no longer start the engine.
Is a locksmith-made BMW key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Can you make a key for a 1990 BMW 7 Series if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Does car insurance cover a replacement BMW key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Do you also repair the ignition on a 1990 BMW 7 Series?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Will my lost 1990 BMW 7 Series key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Which parts of Carson do you serve?
All of Carson, including Dominguez Hills, the Avalon Boulevard corridor, the Carson Street corridor, and the industrial district near the 405, and addresses in ZIP codes 90745, 90746, and 90810.
Can you make car keys in Carson?
Yes. We cut and program car keys on site anywhere in Carson, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
