Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

2008 Chrysler 300 Key Replacement in Carson, CA

Need a 2008 Chrysler 300 key in Carson? We come to you with the key machines and programming equipment, any hour of the day or night.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
2008 Chrysler 300 Key Replacement in Carson, CA by Big Daddy Car Key Replacement

Quick answer

The 2008 Chrysler 300 typically uses a remote head key, which combines a edge-cut blade, a transponder chip and lock and unlock buttons in one unit. Big Daddy Car Key Replacement makes 2008 Chrysler 300 keys on site in Carson, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
2008 Chrysler 300
Typical key
Remote head key
Transponder chip
Yes
Blade
Edge-cut
Programming
Required, done on site
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 2008 Chrysler 300 use?

The 2008 Chrysler 300 typically uses a remote head key, which combines a edge-cut blade, a transponder chip and lock and unlock buttons in one unit.

Remote head key

A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps.

2008 Chrysler 300 key replacement in Carson
Remote head key for a 2008 Chrysler 300, made on site in Carson.

How we make a 2008 Chrysler 300 key

For the 2008 Chrysler 300 we match the remote by its frequency and part number, cut the blade to code, program the transponder so the engine starts, and then pair the remote buttons. If your old key’s electronics still work and only the shell or blade is broken, moving them into a new case is a cheaper repair. Expect 20 to 40 minutes for most remote head keys with the vehicle present, and somewhat longer when all keys are lost.

This page covers the 2008 model year. For other years, see the Chrysler 300 key replacement overview, or browse all Chrysler models.

How Chrysler key and immobilizer systems work

Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.

Chrysler introduced the Sentry Key immobilizer in the late 1990s and the Fobik pod key in 2008, followed by Keyless Enter-N-Go proximity fobs. Vehicles from 2018 onward have a secure gateway that needs authorized access for programming.

Common Chrysler key and lock problems

These are the issues we see most often on Chrysler vehicles in Carson:

  • Fobik keys that are not recognized because of a worn wireless ignition node
  • "Key not detected" messages on push-button models with a weak fob battery
  • Lost keys on vehicles protected by the secure gateway, which defeats generic tools
  • Worn door and ignition wafers on older Wranglers and Cherokees

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Chrysler right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

2008 Chrysler 300 key replacement across Carson

Carson is an incorporated city in Los Angeles County, part of the South Bay area we cover every day. We cover every part of Carson, including Dominguez Hills, the Avalon Boulevard corridor, the Carson Street corridor, and the industrial district near the 405. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP codes 90745, 90746, and 90810.

Carson is a logistics powerhouse near the ports, with warehouses, truck yards and refineries surrounding suburban neighborhoods, so fleet keys, semi-truck lockouts and commercial hardware are a big share of the work.

If you are out and about near Dignity Health Sports Park, California State University, Dominguez Hills, SouthBay Pavilion, or the Porsche Experience Center, give us that location when you call and wait somewhere safe and visible. Carson is served by I-405, I-110, SR-91, I-710, Avalon Boulevard, and Carson Street, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.

Getting a 2008 Chrysler 300 key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 2008 Chrysler 300, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 2008 Chrysler 300 key in Carson
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Chrysler key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 2008 Chrysler 300 key

OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.

The remote itself is the main cost, followed by programming. OEM remotes cost more than quality aftermarket ones; we explain the difference and let you choose where both are available. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.

Situations we are called to most often

  • The key is locked in the trunk and the trunk release is disabled.
  • A used car was sold with one worn key and no spare.
  • A hardware-store copy opens the door but the engine will not start.
  • The dash reads "key not detected" and the start button does nothing.
  • The ignition will not turn and the key will not come out.

Why drivers in Carson choose Big Daddy

A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Carson.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Chrysler car key service in Carson
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Chrysler key

Buttons fail before anything else. A silicone cover and a light keychain extend the life of the key, and a worn rubber pad can be replaced before the circuit board is damaged.

  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.

Choosing a car locksmith you can trust

  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.

Other Chrysler 300 years

Other Chrysler models

2008 Chrysler 300 keys near Carson

We make 2008 Chrysler 300 keys in the communities around Carson as well. See the main 2008 Chrysler 300 key replacement page or the Carson locksmith page.

2008 Chrysler 300 key replacement in Carson: frequently asked questions

The buttons on my 2008 Chrysler 300 key stopped working but it still starts the car. What is wrong?

The remote transmitter has failed or its battery is dead, while the separate transponder chip is fine. Try a new battery first. If that does not help, the remote portion needs repair or replacement.

Can you replace only the shell of my Chrysler key?

Yes. If the circuit board and chip work, we transfer them into a new shell and cut a new blade, which costs much less than a complete key.

Will an aftermarket remote key work on my 2008 Chrysler 300?

A quality aftermarket key with the correct chip and frequency works the same as the original. Very cheap online keys are a gamble; many cannot be programmed at all.

Do I need a PIN code to program a Chrysler key?

Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.

Can you program keys for a 2018 or newer Chrysler with the secure gateway?

Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.

Will my lost 2008 Chrysler 300 key still start the car?

For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.

What do you need from me to make a 2008 Chrysler 300 key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

Can you make a key for a 2008 Chrysler 300 if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Can you program a key I bought online for my 2008 Chrysler 300?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

How much does a 2008 Chrysler 300 key cost?

It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.

Is there a travel charge for Carson?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Carson, so you know the cost in advance.

Can you make car keys in Carson?

Yes. We cut and program car keys on site anywhere in Carson, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

Which areas do you cover?

We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

Call Now (562) 550-7206Open 24 hours · mobile locksmith