Quick answer
The 1998 Acura CL typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1998 Acura CL keys on site in City of Industry, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1998 Acura CL
- Typical key
- Transponder chip key
- Transponder chip
- Yes on most; varies by trim
- Blade
- Edge-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1998 Acura CL use?
- How we make a 1998 Acura CL key
- How Acura key and immobilizer systems work
- Common Acura key and lock problems
- All keys lost or just need a spare?
- Stranded with your Acura right now?
- 1998 Acura CL key replacement across City of Industry
- Getting a 1998 Acura CL key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Acura key?
- What affects the cost of a 1998 Acura CL key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in City of Industry choose Big Daddy
- Looking after your Acura key
- Choosing a car locksmith you can trust
- Other Acura CL years
- Other Acura models
- Related automotive locksmith services in City of Industry
- 1998 Acura CL keys near City of Industry
- 1998 Acura CL key replacement in City of Industry: frequently asked questions
What kind of key does a 1998 Acura CL use?
The 1998 Acura CL typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

How we make a 1998 Acura CL key
For the 1998 Acura CL we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.
This page covers the 1998 model year. For other years, see the Acura CL key replacement overview, or browse all Acura models.
How Acura key and immobilizer systems work
Honda and Acura immobilizers register each key’s transponder in the engine computer or immobilizer unit. There is no owner self-programming; a diagnostic tool is always required. Most models from the early 2000s use a laser-cut blade, later ones a remote-head key, and Smart Entry proximity keys appear from the mid-2010s. When adding a key, existing keys are usually re-registered in the same session.
Acura adopted laser-cut keys and immobilizers earlier than most brands, and its Keyless Access proximity system spread across the range from the RL in 2005. Many Acura smart keys are tied to driver memory positions, so each key is numbered.
Common Acura key and lock problems
These are the issues we see most often on Acura vehicles in City of Industry:
- Worn laser-cut keys that stop turning the ignition smoothly
- Ignition cylinders with sticking wafers on high-mileage Accord, Civic and CR-V models
- A flashing green key light when the chip is not recognized
- Remote-head keys with cracked cases or worn buttons
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Acura right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1998 Acura CL key replacement across City of Industry
Located in Los Angeles County, City of Industry is an incorporated city within our San Gabriel Valley service area. We cover every part of City of Industry, including the Valley Boulevard corridor, the Gale Avenue corridor, the Puente Hills Mall district, and the Fullerton Road corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91744, 91745, 91746, 91748, and 91789 ZIP codes.
The City of Industry exists almost entirely for business, with thousands of warehouses, importers and manufacturers along its rail corridor, so commercial rekeys, dock door locks and fleet keys are the core work.
If you are out and about near Puente Hills Mall, Pacific Palms Resort and Industry Hills Golf Club, the Workman and Temple Family Homestead Museum, or the Industry Hills Expo Center, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into City of Industry follows SR-60, I-605, SR-57, Valley Boulevard, Gale Avenue, and Azusa Avenue. You get a realistic arrival estimate when you call.
Getting a 1998 Acura CL key made, step by step
Call with the year, make and model
Tell us you need a key for a 1998 Acura CL, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Acura key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1998 Acura CL key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Situations we are called to most often
- The key fob went through the washing machine.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- A used car was sold with one worn key and no spare.
- A hardware-store copy opens the door but the engine will not start.
- The ignition will not turn and the key will not come out.
Why drivers in City of Industry choose Big Daddy
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to City of Industry.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Looking after your Acura key
The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
Choosing a car locksmith you can trust
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Other Acura CL years
Other Acura models
- Acura MDX keys
- Acura NSX keys
- Acura RDX keys
- Acura TL keys
- Acura RL keys
- Acura Integra keys
- Acura TLX keys
- Acura TSX keys
- Acura ILX keys
- Acura RLX keys
- Acura ZDX keys
- Acura Legend keys
- Acura RSX keys
Related automotive locksmith services in City of Industry
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Key Fob Programming
Programming new or replacement key fobs.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
1998 Acura CL keys near City of Industry
We make 1998 Acura CL keys in the communities around City of Industry as well. See the main 1998 Acura CL key replacement page or the City of Industry locksmith page.
- 1998 Acura CL keys in La Puente
- 1998 Acura CL keys in Hacienda Heights
- 1998 Acura CL keys in West Covina
- 1998 Acura CL keys in La Habra Heights
- 1998 Acura CL keys in Rowland Heights
- 1998 Acura CL keys in Baldwin Park
- 1998 Acura CL keys in Whittier
- 1998 Acura CL keys in El Monte
- 1998 Acura CL keys in Walnut
- 1998 Acura CL keys in South El Monte
- 1998 Acura CL keys in Irwindale
- 1998 Acura CL keys in Covina
1998 Acura CL key replacement in City of Industry: frequently asked questions
Does my 1998 Acura CL key have a chip?
Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.
Can I program a 1998 Acura CL key myself?
Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.
Why does my Acura crank but not start with the new copy?
The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.
What does the blinking green key light on my Acura dashboard mean?
The immobilizer is not recognizing the key’s transponder. The chip may be damaged, the key may be unprogrammed, or another chip key on the ring may be interfering.
Can I program a Acura key myself?
No. The immobilizer requires a diagnostic tool to register keys. Remote buttons on some older models can be paired by a manual sequence, but the chip cannot.
Will my lost 1998 Acura CL key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Does car insurance cover a replacement Acura key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
What do you need from me to make a 1998 Acura CL key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Can you unlock my 1998 Acura CL if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Do you also repair the ignition on a 1998 Acura CL?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Are you open 24 hours in City of Industry?
Yes. We take calls and dispatch to City of Industry 24 hours a day, including weekends and holidays.
Do you have a locksmith shop in City of Industry?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout City of Industry and the rest of the San Gabriel Valley area. All work is done at your location.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
