Quick answer
The 1999 Ford Ranger typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1999 Ford Ranger keys on site in City of Industry, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1999 Ford Ranger
- Typical key
- Transponder chip key
- Transponder chip
- Yes on most; varies by trim
- Blade
- Edge-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1999 Ford Ranger use?
- How we make a 1999 Ford Ranger key
- How Ford key and immobilizer systems work
- Common Ford key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ford right now?
- 1999 Ford Ranger key replacement across City of Industry
- Getting a 1999 Ford Ranger key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ford key?
- What affects the cost of a 1999 Ford Ranger key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in City of Industry choose Big Daddy
- Looking after your Ford key
- Choosing a car locksmith you can trust
- Other Ford Ranger years
- Other Ford models
- Related automotive locksmith services in City of Industry
- 1999 Ford Ranger keys near City of Industry
- 1999 Ford Ranger key replacement in City of Industry: frequently asked questions
What kind of key does a 1999 Ford Ranger use?
The 1999 Ford Ranger typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

How we make a 1999 Ford Ranger key
For the 1999 Ford Ranger we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.
This page covers the 1999 model year. For other years, see the Ford Ranger key replacement overview, or browse all Ford models.
How Ford key and immobilizer systems work
Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.
Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.
Common Ford key and lock problems
These are the issues we see most often on Ford vehicles in City of Industry:
- A rapidly flashing theft light and no start after using an unprogrammed copy
- Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
- Remote-head keys whose buttons wear through
- Door keypad codes that owners have forgotten or never learned
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Ford right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1999 Ford Ranger key replacement across City of Industry
Located in Los Angeles County, City of Industry is an incorporated city within our San Gabriel Valley service area. We cover every part of City of Industry, including the Valley Boulevard corridor, the Gale Avenue corridor, the Puente Hills Mall district, and the Fullerton Road corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91744, 91745, 91746, 91748, and 91789 ZIP codes.
The City of Industry exists almost entirely for business, with thousands of warehouses, importers and manufacturers along its rail corridor, so commercial rekeys, dock door locks and fleet keys are the core work.
If you are out and about near Puente Hills Mall, Pacific Palms Resort and Industry Hills Golf Club, the Workman and Temple Family Homestead Museum, or the Industry Hills Expo Center, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into City of Industry follows SR-60, I-605, SR-57, Valley Boulevard, Gale Avenue, and Azusa Avenue. You get a realistic arrival estimate when you call.
Getting a 1999 Ford Ranger key made, step by step
Call with the year, make and model
Tell us you need a key for a 1999 Ford Ranger, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ford key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1999 Ford Ranger key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- The key fob went through the washing machine.
- A hardware-store copy opens the door but the engine will not start.
- The key is locked in the trunk and the trunk release is disabled.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers in City of Industry choose Big Daddy
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to City of Industry.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Looking after your Ford key
The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
Choosing a car locksmith you can trust
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Other Ford Ranger years
- 2026 Ranger
- 2025 Ranger
- 2024 Ranger
- 2023 Ranger
- 2022 Ranger
- 2021 Ranger
- 2020 Ranger
- 2019 Ranger
- 2011 Ranger
- 2010 Ranger
- 2009 Ranger
- 2008 Ranger
- 2007 Ranger
- 2006 Ranger
- 2005 Ranger
- 2004 Ranger
- 2003 Ranger
- 2002 Ranger
- 2001 Ranger
- 2000 Ranger
- 1998 Ranger
- 1997 Ranger
- 1996 Ranger
- 1995 Ranger
- 1994 Ranger
- 1993 Ranger
- 1992 Ranger
- 1991 Ranger
- 1990 Ranger
Other Ford models
- Ford E-350 keys
- Ford F-150 keys
- Ford Mustang keys
- Ford Explorer keys
- Ford Expedition keys
- Ford Taurus keys
- Ford F-250 Super Duty keys
- Ford F-350 Super Duty keys
- Ford Escape keys
- Ford E-150 keys
- Ford E-250 keys
- Ford Crown Victoria keys
- Ford Focus keys
Related automotive locksmith services in City of Industry
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
1999 Ford Ranger keys near City of Industry
We make 1999 Ford Ranger keys in the communities around City of Industry as well. See the main 1999 Ford Ranger key replacement page or the City of Industry locksmith page.
- 1999 Ford Ranger keys in La Puente
- 1999 Ford Ranger keys in Hacienda Heights
- 1999 Ford Ranger keys in West Covina
- 1999 Ford Ranger keys in La Habra Heights
- 1999 Ford Ranger keys in Rowland Heights
- 1999 Ford Ranger keys in Baldwin Park
- 1999 Ford Ranger keys in Whittier
- 1999 Ford Ranger keys in El Monte
- 1999 Ford Ranger keys in Walnut
- 1999 Ford Ranger keys in South El Monte
- 1999 Ford Ranger keys in Irwindale
- 1999 Ford Ranger keys in Covina
1999 Ford Ranger key replacement in City of Industry: frequently asked questions
Does my 1999 Ford Ranger key have a chip?
Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.
Can I program a 1999 Ford Ranger key myself?
Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.
Why does my Ford crank but not start with the new copy?
The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.
I have only one Ford key. Can I program a second one myself?
No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.
Why does programming a Ford key take ten minutes of waiting?
PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.
Does car insurance cover a replacement Ford key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
Can you make a key for a 1999 Ford Ranger if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Do you also repair the ignition on a 1999 Ford Ranger?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
How much does a 1999 Ford Ranger key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Will my lost 1999 Ford Ranger key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Can you make car keys in City of Industry?
Yes. We cut and program car keys on site anywhere in City of Industry, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is there a travel charge for City of Industry?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to City of Industry, so you know the cost in advance.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
