Quick answer
Door Closer Installation: Installing hydraulic door closers on commercial doors. Big Daddy Car Key Replacement provides door closer installation service in City of Industry as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Closer Installation
- Area
- City of Industry, Los Angeles County, CA (91744, 91745, 91746, 91748, 91789)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our door closer installation service
- Customers we serve in City of Industry
- Reasons to call for door closer installation service
- Door Closer Installation across City of Industry
- How our door closer installation service works
- Situations we handle regularly
- Tools, parts and hardware we carry
- Terms worth knowing
- What affects the cost of door closer installation service
- Why call Big Daddy Car Key Replacement
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- Our service standards
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in City of Industry
- Door Closer Installation near City of Industry
- Door Closer Installation in City of Industry: frequently asked questions
About our door closer installation service
Installing hydraulic door closers on commercial doors. A door closer controls how a door shuts so it latches every time without slamming. We size the closer to the door’s width and weight, choose regular, parallel or top-jamb mounting for the frame, and set closing force so the door meets accessibility limits on opening effort while still latching against air pressure.

Every business in City of Industry eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our door closer installation service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Customers we serve in City of Industry
Our commercial customers in City of Industry include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in City of Industry.
Reasons to call for door closer installation service
These are the most common reasons customers in City of Industry ask for door closer installation service:
- A door does not close or latch by itself
- A fire-rated door has no closer
- An entry door slams in the wind
- A new access-controlled door must relock every time
Door Closer Installation across City of Industry
Located in Los Angeles County, City of Industry is an incorporated city within our San Gabriel Valley service area. Our door closer installation service reaches all of City of Industry, including the Valley Boulevard corridor, the Gale Avenue corridor, the Puente Hills Mall district, and the Fullerton Road corridor, as well as the streets in between. You do not need to bring anything to a shop. We serve the 91744, 91745, 91746, 91748, and 91789 ZIP codes.
The City of Industry exists almost entirely for business, with thousands of warehouses, importers and manufacturers along its rail corridor, so commercial rekeys, dock door locks and fleet keys are the core work.
Whether you are at home, at work, or stuck near Puente Hills Mall, Pacific Palms Resort and Industry Hills Golf Club, the Workman and Temple Family Homestead Museum, or the Industry Hills Expo Center, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into City of Industry follows SR-60, I-605, SR-57, Valley Boulevard, Gale Avenue, and Azusa Avenue. You get a realistic arrival estimate when you call.
How our door closer installation service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Situations we handle regularly
- A closer has failed and the front door slams hard enough to rattle the glass.
- A manager is let go and returns only some of the keys issued.
- The back door shows pry marks around the latch after the weekend.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The storefront door will not latch and the shop cannot be left for the night.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Terms worth knowing
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
What affects the cost of door closer installation service
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to City of Industry.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Practical advice from our locksmiths
- Consider keypad or card access for doors with frequent staff turnover.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Give each employee access only to the doors their job requires.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Keep a written key log: who holds which key, and the date it was issued and returned.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in City of Industry
Customers who need door closer installation service often ask about these as well. Each can usually be handled in the same visit to City of Industry.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Desk Lock Repair
Repairing locks for desks, drawers and office furniture.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Storefront Lock Replacement
Replacing mortise locks, hook bolts, paddle handles, thumb turns and commercial cylinders.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles, Ventura and Orange County.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
Door Closer Installation near City of Industry
We provide the same door closer installation service in the communities around City of Industry. See the main door closer installation page or the full list of service areas.
- Door Closer Installation in La Puente
- Door Closer Installation in Hacienda Heights
- Door Closer Installation in West Covina
- Door Closer Installation in La Habra Heights
- Door Closer Installation in Rowland Heights
- Door Closer Installation in Baldwin Park
- Door Closer Installation in Whittier
- Door Closer Installation in El Monte
- Door Closer Installation in Walnut
- Door Closer Installation in South El Monte
- Door Closer Installation in Irwindale
- Door Closer Installation in Covina
Door Closer Installation in City of Industry: frequently asked questions
What size door closer do I need?
Closers are sized from 1 to 6 by door width, weight and exposure to wind. Many are adjustable across several sizes; we set the spring to the lowest force that reliably latches the door.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Can you work outside our business hours in City of Industry?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Which parts of City of Industry do you serve?
All of City of Industry, including the Valley Boulevard corridor, the Gale Avenue corridor, the Puente Hills Mall district, and the Fullerton Road corridor, and addresses in ZIP codes 91744, 91745, 91746, 91748, and 91789.
Can you make car keys in City of Industry?
Yes. We cut and program car keys on site anywhere in City of Industry, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Are you open 24 hours in City of Industry?
Yes. We take calls and dispatch to City of Industry 24 hours a day, including weekends and holidays.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
