Quick answer
Exit Device Repair: Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Big Daddy Car Key Replacement provides exit device repair service in City of Industry as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Exit Device Repair
- Area
- City of Industry, Los Angeles County, CA (91744, 91745, 91746, 91748, 91789)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What exit device repair means
- Customers we serve in City of Industry
- When you need exit device repair service
- Exit Device Repair across City of Industry
- Our exit device repair process, step by step
- Typical calls we receive
- What our technicians bring
- Terms worth knowing
- What affects the cost of exit device repair service
- Why City of Industry customers choose Big Daddy
- Advice worth knowing
- Doing it yourself versus calling a professional
- What we commit to
- Questions to ask any locksmith
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in City of Industry
- Exit Device Repair near City of Industry
- Exit Device Repair in City of Industry: frequently asked questions
What exit device repair means
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Exit devices have many moving parts: touchpads, latchbolts, top and bottom rods, dogging cylinders and outside lever trim. Vertical rods go out of adjustment as doors sag, and bottom latches clog with debris. We adjust rods, replace worn latches and trim, and convert troublesome bottom rods to less-bottom-rod setups where permitted.

Every business in City of Industry eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our exit device repair service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Customers we serve in City of Industry
Our commercial customers in City of Industry include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in City of Industry.
When you need exit device repair service
People in City of Industry usually call us for exit device repair service in situations like these:
- Top or bottom rods do not engage
- The outside lever no longer opens the door
- The dogging key will not hold the bar down
- The device rattles or the end cap is missing
Exit Device Repair across City of Industry
City of Industry is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. We cover every part of City of Industry, including the Valley Boulevard corridor, the Gale Avenue corridor, the Puente Hills Mall district, and the Fullerton Road corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 91744, 91745, 91746, 91748, and 91789.
The City of Industry exists almost entirely for business, with thousands of warehouses, importers and manufacturers along its rail corridor, so commercial rekeys, dock door locks and fleet keys are the core work.
Whether you are at home, at work, or stuck near Puente Hills Mall, Pacific Palms Resort and Industry Hills Golf Club, the Workman and Temple Family Homestead Museum, or the Industry Hills Expo Center, tell the dispatcher the nearest landmark and we will find you. City of Industry is served by SR-60, I-605, SR-57, Valley Boulevard, Gale Avenue, and Azusa Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our exit device repair process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- The storefront door will not latch and the shop cannot be left for the night.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The back door shows pry marks around the latch after the weekend.
- A manager is let go and returns only some of the keys issued.
- A closer has failed and the front door slams hard enough to rattle the glass.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Terms worth knowing
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
What affects the cost of exit device repair service
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to City of Industry. The technician confirms the figure before starting.
Why City of Industry customers choose Big Daddy
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Advice worth knowing
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Consider keypad or card access for doors with frequent staff turnover.
- Give each employee access only to the doors their job requires.
- Store spare keys in a locked key cabinet, not a desk drawer.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in City of Industry
Customers who need exit device repair service often ask about these as well. Each can usually be handled in the same visit to City of Industry.
- Exit Device Installation
Installing code-compliant exit devices for commercial emergency exits.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- Warehouse Locksmith Service
Heavy-duty locks, roll-up door locks, padlocks, access control and master key systems.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Automatic Door Closer Adjustment
Adjusting speed, latch, sweep and backcheck settings.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
Exit Device Repair near City of Industry
We provide the same exit device repair service in the communities around City of Industry. See the main exit device repair page or the full list of service areas.
- Exit Device Repair in La Puente
- Exit Device Repair in Hacienda Heights
- Exit Device Repair in West Covina
- Exit Device Repair in La Habra Heights
- Exit Device Repair in Rowland Heights
- Exit Device Repair in Baldwin Park
- Exit Device Repair in Whittier
- Exit Device Repair in El Monte
- Exit Device Repair in Walnut
- Exit Device Repair in South El Monte
- Exit Device Repair in Irwindale
- Exit Device Repair in Covina
Exit Device Repair in City of Industry: frequently asked questions
Can vertical rod exit devices be adjusted?
Yes. Rod length and latch engagement are adjustable, and most problems come from sagging doors pulling the rods out of range. We realign the door first and then set the rods so both latches engage fully.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Can you work outside our business hours in City of Industry?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Do you have a locksmith shop in City of Industry?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout City of Industry and the rest of the San Gabriel Valley area. All work is done at your location.
Is there a travel charge for City of Industry?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to City of Industry, so you know the cost in advance.
Are you open 24 hours in City of Industry?
Yes. We take calls and dispatch to City of Industry 24 hours a day, including weekends and holidays.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
