Quick answer
Restaurant Locksmith Service: Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants. Big Daddy Car Key Replacement provides restaurant locksmith service in Claremont as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Restaurant Locksmith Service
- Area
- Claremont, Los Angeles County, CA (91711)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What restaurant locksmith service means
- Who uses this service
- Signs you need restaurant locksmith service
- Restaurant Locksmith Service across Claremont
- How our restaurant locksmith service works
- Situations we handle regularly
- What our technicians bring
- Terms worth knowing
- How restaurant locksmith service is priced
- What you can expect from us
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- Our service standards
- Questions to ask any locksmith
- What to have ready when you call
- After the visit
- Related locksmith services in Claremont
- Restaurant Locksmith Service near Claremont
- Restaurant Locksmith Service in Claremont: frequently asked questions
What restaurant locksmith service means
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants. Restaurants are hard on doors. Grease and heat attack back-door hardware, delivery traffic abuses closers and exit devices, and staff turnover scatters keys. We keep front doors latching, back doors compliant with exit rules, offices and liquor storage restricted, and keys under control with rekeys or code-based locks.

Every business in Claremont eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our restaurant locksmith service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who uses this service
Our commercial customers in Claremont include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Claremont.
Signs you need restaurant locksmith service
These are the most common reasons customers in Claremont ask for restaurant locksmith service:
- High staff turnover has spread keys around
- The back delivery door will not latch
- The office or liquor room needs restricted access
- A health or fire inspection flagged a door
Restaurant Locksmith Service across Claremont
Claremont is an incorporated city in Los Angeles County, part of the Pomona Valley area we cover every day. Our restaurant locksmith service reaches all of Claremont, including Claremont Village, Padua Hills, Claraboya, Piedmont Mesa, and the college district, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP code 91711.
Claremont is a college town of historic bungalows, mid-century modern homes and seven campuses, where student lockouts, faculty housing rekeys and careful work on period hardware are common.
People call us from all over Claremont, including the areas around The Claremont Colleges, Claremont Village, the California Botanic Garden, Claremont Hills Wilderness Park, and the Claremont Depot. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Claremont follows I-10, I-210, Foothill Boulevard, Indian Hill Boulevard, Towne Avenue, and Base Line Road. You get a realistic arrival estimate when you call.
How our restaurant locksmith service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- A closer has failed and the front door slams hard enough to rattle the glass.
- A manager is let go and returns only some of the keys issued.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The back door shows pry marks around the latch after the weekend.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- The storefront door will not latch and the shop cannot be left for the night.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Terms worth knowing
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
How restaurant locksmith service is priced
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Claremont. The technician confirms the figure before starting.
What you can expect from us
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Claremont.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Practical advice from our locksmiths
- Give each employee access only to the doors their job requires.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Consider keypad or card access for doors with frequent staff turnover.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Get an itemized receipt showing labor, parts and the business details.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Claremont
Customers who need restaurant locksmith service often ask about these as well. Each can usually be handled in the same visit to Claremont.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Restricted Key Systems
Installing key systems that prevent unauthorized key duplication.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Panic Bar Repair
Repairing panic bars that stick, fail to latch, alarm or do not open correctly.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
Restaurant Locksmith Service near Claremont
We provide the same restaurant locksmith service in the communities around Claremont. See the main restaurant locksmith service page or the full list of service areas.
- Restaurant Locksmith Service in La Verne
- Restaurant Locksmith Service in Pomona
- Restaurant Locksmith Service in San Dimas
- Restaurant Locksmith Service in Diamond Bar
- Restaurant Locksmith Service in Glendora
- Restaurant Locksmith Service in Covina
- Restaurant Locksmith Service in Walnut
- Restaurant Locksmith Service in Azusa
- Restaurant Locksmith Service in Irwindale
- Restaurant Locksmith Service in West Covina
- Restaurant Locksmith Service in Rowland Heights
- Restaurant Locksmith Service in Baldwin Park
Restaurant Locksmith Service in Claremont: frequently asked questions
How do restaurants keep track of keys with high turnover?
Many move the office and back door to keypad or card locks with individual codes that are deleted when someone leaves, and put remaining keyed doors on a restricted keyway so copies cannot be made.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Can you work outside our business hours in Claremont?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Do you have a locksmith shop in Claremont?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Claremont and the rest of the Pomona Valley area. All work is done at your location.
How long does it take a locksmith to reach me in Claremont?
It depends on where the nearest technician is and on traffic along I-10, I-210, or Foothill Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Can you make car keys in Claremont?
Yes. We cut and program car keys on site anywhere in Claremont, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
