Quick answer
The 2000 Chrysler Sebring typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 2000 Chrysler Sebring keys on site in Commerce, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2000 Chrysler Sebring
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2000 Chrysler Sebring use?
- How we make a 2000 Chrysler Sebring key
- How Chrysler key and immobilizer systems work
- Common Chrysler key and lock problems
- All keys lost or just need a spare?
- Stranded with your Chrysler right now?
- 2000 Chrysler Sebring key replacement across Commerce
- Getting a 2000 Chrysler Sebring key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Chrysler key?
- What affects the cost of a 2000 Chrysler Sebring key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Commerce choose Big Daddy
- Looking after your Chrysler key
- Choosing a car locksmith you can trust
- Other Chrysler Sebring years
- Other Chrysler models
- Related automotive locksmith services in Commerce
- 2000 Chrysler Sebring keys near Commerce
- 2000 Chrysler Sebring key replacement in Commerce: frequently asked questions
What kind of key does a 2000 Chrysler Sebring use?
The 2000 Chrysler Sebring typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 2000 Chrysler Sebring key
For the 2000 Chrysler Sebring we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 2000 model year. For other years, see the Chrysler Sebring key replacement overview, or browse all Chrysler models.
How Chrysler key and immobilizer systems work
Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.
Chrysler introduced the Sentry Key immobilizer in the late 1990s and the Fobik pod key in 2008, followed by Keyless Enter-N-Go proximity fobs. Vehicles from 2018 onward have a secure gateway that needs authorized access for programming.
Common Chrysler key and lock problems
These are the issues we see most often on Chrysler vehicles in Commerce:
- Fobik keys that are not recognized because of a worn wireless ignition node
- "Key not detected" messages on push-button models with a weak fob battery
- Lost keys on vehicles protected by the secure gateway, which defeats generic tools
- Worn door and ignition wafers on older Wranglers and Cherokees
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Chrysler right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
2000 Chrysler Sebring key replacement across Commerce
Commerce is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Customers anywhere in Commerce, including the Citadel district, the Telegraph Road corridor, the rail yard industrial district, and the Rosewood residential neighborhood, can have a mobile technician sent directly to them. Service is available throughout ZIP code 90040.
Commerce is overwhelmingly industrial, with rail yards, warehouses and distribution centers, so the work centers on commercial lock systems, exit devices, truck keys and restricted key control.
Whether you are at home, at work, or stuck near Citadel Outlets, Commerce Casino, Rosewood Park, or the city’s rail yards and distribution centers, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Commerce by I-5, I-710, Atlantic Boulevard, Washington Boulevard, Telegraph Road, and Slauson Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a 2000 Chrysler Sebring key made, step by step
Call with the year, make and model
Tell us you need a key for a 2000 Chrysler Sebring, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Chrysler key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2000 Chrysler Sebring key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Situations we are called to most often
- The key fob went through the washing machine.
- The ignition will not turn and the key will not come out.
- A hardware-store copy opens the door but the engine will not start.
- A used car was sold with one worn key and no spare.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers in Commerce choose Big Daddy
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your Chrysler key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
Choosing a car locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Other Chrysler Sebring years
- 2010 Sebring
- 2009 Sebring
- 2008 Sebring
- 2007 Sebring
- 2006 Sebring
- 2005 Sebring
- 2004 Sebring
- 2003 Sebring
- 2002 Sebring
- 2001 Sebring
- 1999 Sebring
- 1998 Sebring
- 1997 Sebring
- 1996 Sebring
- 1995 Sebring
Other Chrysler models
- Chrysler Town & Country keys
- Chrysler 300 keys
- Chrysler Pacifica keys
- Chrysler Concorde keys
- Chrysler PT Cruiser keys
- Chrysler Voyager keys
- Chrysler LHS keys
- Chrysler 200 keys
- Chrysler 300M keys
- Chrysler Cirrus keys
- Chrysler Crossfire keys
- Chrysler Aspen keys
Related automotive locksmith services in Commerce
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Spare Car Key
Creating duplicate or backup keys.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
2000 Chrysler Sebring keys near Commerce
We make 2000 Chrysler Sebring keys in the communities around Commerce as well. See the main 2000 Chrysler Sebring key replacement page or the Commerce locksmith page.
- 2000 Chrysler Sebring keys in Maywood
- 2000 Chrysler Sebring keys in East Los Angeles
- 2000 Chrysler Sebring keys in Bell
- 2000 Chrysler Sebring keys in Bell Gardens
- 2000 Chrysler Sebring keys in Montebello
- 2000 Chrysler Sebring keys in Cudahy
- 2000 Chrysler Sebring keys in Pico Rivera
- 2000 Chrysler Sebring keys in Huntington Park
- 2000 Chrysler Sebring keys in Vernon
- 2000 Chrysler Sebring keys in South Gate
- 2000 Chrysler Sebring keys in Downey
- 2000 Chrysler Sebring keys in Monterey Park
2000 Chrysler Sebring key replacement in Commerce: frequently asked questions
Does a 2000 Chrysler Sebring key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 2000 Chrysler Sebring key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Chrysler key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Do I need a PIN code to program a Chrysler key?
Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.
Can you program keys for a 2018 or newer Chrysler with the secure gateway?
Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.
How many keys should I have for my 2000 Chrysler Sebring?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Do I have to tow my 2000 Chrysler Sebring to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you program a key I bought online for my 2000 Chrysler Sebring?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Do you also repair the ignition on a 2000 Chrysler Sebring?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Can you make a 2000 Chrysler Sebring key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
How long does it take a locksmith to reach me in Commerce?
It depends on where the nearest technician is and on traffic along I-5, I-710, or Atlantic Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Are you open 24 hours in Commerce?
Yes. We take calls and dispatch to Commerce 24 hours a day, including weekends and holidays.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
