Quick answer
The 2000 Ford Focus typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Big Daddy Car Key Replacement makes 2000 Ford Focus keys on site in Commerce, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2000 Ford Focus
- Typical key
- Transponder chip key
- Transponder chip
- Yes
- Blade
- Edge-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2000 Ford Focus use?
- How we make a 2000 Ford Focus key
- How Ford key and immobilizer systems work
- Common Ford key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ford right now?
- 2000 Ford Focus key replacement across Commerce
- Getting a 2000 Ford Focus key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ford key?
- What affects the cost of a 2000 Ford Focus key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Commerce choose Big Daddy
- Looking after your Ford key
- Choosing a car locksmith you can trust
- Other Ford Focus years
- Other Ford models
- Related automotive locksmith services in Commerce
- 2000 Ford Focus keys near Commerce
- 2000 Ford Focus key replacement in Commerce: frequently asked questions
What kind of key does a 2000 Ford Focus use?
The 2000 Ford Focus typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run.
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

How we make a 2000 Ford Focus key
For the 2000 Ford Focus we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.
This page covers the 2000 model year. For other years, see the Ford Focus key replacement overview, or browse all Ford models.
How Ford key and immobilizer systems work
Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.
Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.
Common Ford key and lock problems
These are the issues we see most often on Ford vehicles in Commerce:
- A rapidly flashing theft light and no start after using an unprogrammed copy
- Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
- Remote-head keys whose buttons wear through
- Door keypad codes that owners have forgotten or never learned
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Ford right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
2000 Ford Focus key replacement across Commerce
Located in Los Angeles County, Commerce is an incorporated city within our Gateway Cities service area. Our Ford key replacement service reaches all of Commerce, including the Citadel district, the Telegraph Road corridor, the rail yard industrial district, and the Rosewood residential neighborhood, as well as the streets in between. You do not need to bring anything to a shop. We serve the 90040 ZIP code.
Commerce is overwhelmingly industrial, with rail yards, warehouses and distribution centers, so the work centers on commercial lock systems, exit devices, truck keys and restricted key control.
People call us from all over Commerce, including the areas around Citadel Outlets, Commerce Casino, Rosewood Park, and the city’s rail yards and distribution centers. A landmark or cross street helps the technician reach you quickly. Commerce is served by I-5, I-710, Atlantic Boulevard, Washington Boulevard, Telegraph Road, and Slauson Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 2000 Ford Focus key made, step by step
Call with the year, make and model
Tell us you need a key for a 2000 Ford Focus, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ford key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2000 Ford Focus key
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
Situations we are called to most often
- A hardware-store copy opens the door but the engine will not start.
- The dash reads "key not detected" and the start button does nothing.
- The key is locked in the trunk and the trunk release is disabled.
- The key fob went through the washing machine.
- The ignition will not turn and the key will not come out.
Why drivers in Commerce choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Commerce.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Looking after your Ford key
The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
Choosing a car locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Other Ford Focus years
- 2018 Focus
- 2017 Focus
- 2016 Focus
- 2015 Focus
- 2014 Focus
- 2013 Focus
- 2012 Focus
- 2011 Focus
- 2010 Focus
- 2009 Focus
- 2008 Focus
- 2007 Focus
- 2006 Focus
- 2005 Focus
- 2004 Focus
- 2003 Focus
- 2002 Focus
- 2001 Focus
Other Ford models
- Ford E-350 keys
- Ford F-150 keys
- Ford Mustang keys
- Ford Explorer keys
- Ford Expedition keys
- Ford Ranger keys
- Ford Taurus keys
- Ford F-250 Super Duty keys
- Ford F-350 Super Duty keys
- Ford Escape keys
- Ford E-150 keys
- Ford E-250 keys
- Ford Crown Victoria keys
Related automotive locksmith services in Commerce
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Key Fob Programming
Programming new or replacement key fobs.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
2000 Ford Focus keys near Commerce
We make 2000 Ford Focus keys in the communities around Commerce as well. See the main 2000 Ford Focus key replacement page or the Commerce locksmith page.
- 2000 Ford Focus keys in Maywood
- 2000 Ford Focus keys in East Los Angeles
- 2000 Ford Focus keys in Bell
- 2000 Ford Focus keys in Bell Gardens
- 2000 Ford Focus keys in Montebello
- 2000 Ford Focus keys in Cudahy
- 2000 Ford Focus keys in Pico Rivera
- 2000 Ford Focus keys in Huntington Park
- 2000 Ford Focus keys in Vernon
- 2000 Ford Focus keys in South Gate
- 2000 Ford Focus keys in Downey
- 2000 Ford Focus keys in Monterey Park
2000 Ford Focus key replacement in Commerce: frequently asked questions
Does my 2000 Ford Focus key have a chip?
Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.
Can I program a 2000 Ford Focus key myself?
Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.
Why does my Ford crank but not start with the new copy?
The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.
I have only one Ford key. Can I program a second one myself?
No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.
Why does programming a Ford key take ten minutes of waiting?
PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.
Will my lost 2000 Ford Focus key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Does car insurance cover a replacement Ford key?
Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.
How many keys should I have for my 2000 Ford Focus?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Can you make a 2000 Ford Focus key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Is a locksmith-made Ford key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Which parts of Commerce do you serve?
All of Commerce, including the Citadel district, the Telegraph Road corridor, the rail yard industrial district, and the Rosewood residential neighborhood, and addresses in ZIP code 90040.
Can you make car keys in Commerce?
Yes. We cut and program car keys on site anywhere in Commerce, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
