Quick answer
The 1997 Jeep Cherokee typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1997 Jeep Cherokee keys on site in Commerce, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1997 Jeep Cherokee
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1997 Jeep Cherokee use?
- How we make a 1997 Jeep Cherokee key
- How Jeep key and immobilizer systems work
- Common Jeep key and lock problems
- All keys lost or just need a spare?
- Stranded with your Jeep right now?
- 1997 Jeep Cherokee key replacement across Commerce
- Getting a 1997 Jeep Cherokee key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Jeep key?
- What affects the cost of a 1997 Jeep Cherokee key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Commerce choose Big Daddy
- Looking after your Jeep key
- Choosing a car locksmith you can trust
- Other Jeep Cherokee years
- Other Jeep models
- Related automotive locksmith services in Commerce
- 1997 Jeep Cherokee keys near Commerce
- 1997 Jeep Cherokee key replacement in Commerce: frequently asked questions
What kind of key does a 1997 Jeep Cherokee use?
The 1997 Jeep Cherokee typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1997 Jeep Cherokee key
For the 1997 Jeep Cherokee we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1997 model year. For other years, see the Jeep Cherokee key replacement overview, or browse all Jeep models.
How Jeep key and immobilizer systems work
Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.
Jeep keys range from basic metal keys on older Wranglers to Sentry Key transponders, Fobik pod keys and proximity fobs. Wranglers are often driven with doors off, and lost keys on the trail or at the beach are a common call.
Common Jeep key and lock problems
These are the issues we see most often on Jeep vehicles in Commerce:
- Fobik keys that are not recognized because of a worn wireless ignition node
- "Key not detected" messages on push-button models with a weak fob battery
- Lost keys on vehicles protected by the secure gateway, which defeats generic tools
- Worn door and ignition wafers on older Wranglers and Cherokees
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Jeep right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
1997 Jeep Cherokee key replacement across Commerce
Commerce is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. We cover every part of Commerce, including the Citadel district, the Telegraph Road corridor, the rail yard industrial district, and the Rosewood residential neighborhood. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 90040 ZIP code.
Commerce is overwhelmingly industrial, with rail yards, warehouses and distribution centers, so the work centers on commercial lock systems, exit devices, truck keys and restricted key control.
If you are out and about near Citadel Outlets, Commerce Casino, Rosewood Park, or the city’s rail yards and distribution centers, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Commerce by I-5, I-710, Atlantic Boulevard, Washington Boulevard, Telegraph Road, and Slauson Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a 1997 Jeep Cherokee key made, step by step
Call with the year, make and model
Tell us you need a key for a 1997 Jeep Cherokee, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Jeep key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1997 Jeep Cherokee key
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Situations we are called to most often
- The key fob went through the washing machine.
- A used car was sold with one worn key and no spare.
- The key is locked in the trunk and the trunk release is disabled.
- The ignition will not turn and the key will not come out.
- The dash reads "key not detected" and the start button does nothing.
Why drivers in Commerce choose Big Daddy
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your Jeep key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
Choosing a car locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Other Jeep Cherokee years
- 2023 Cherokee
- 2022 Cherokee
- 2021 Cherokee
- 2020 Cherokee
- 2019 Cherokee
- 2018 Cherokee
- 2017 Cherokee
- 2016 Cherokee
- 2015 Cherokee
- 2014 Cherokee
- 2001 Cherokee
- 2000 Cherokee
- 1999 Cherokee
- 1998 Cherokee
- 1996 Cherokee
- 1995 Cherokee
- 1994 Cherokee
- 1993 Cherokee
- 1992 Cherokee
- 1991 Cherokee
- 1990 Cherokee
Other Jeep models
- Jeep Wrangler keys
- Jeep Grand Cherokee keys
- Jeep Compass keys
- Jeep Liberty keys
- Jeep Patriot keys
- Jeep Renegade keys
- Jeep Gladiator keys
- Jeep Commander keys
- Jeep Grand Wagoneer keys
- Jeep Wagoneer keys
Related automotive locksmith services in Commerce
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Spare Car Key
Creating duplicate or backup keys.
1997 Jeep Cherokee keys near Commerce
We make 1997 Jeep Cherokee keys in the communities around Commerce as well. See the main 1997 Jeep Cherokee key replacement page or the Commerce locksmith page.
- 1997 Jeep Cherokee keys in Maywood
- 1997 Jeep Cherokee keys in East Los Angeles
- 1997 Jeep Cherokee keys in Bell
- 1997 Jeep Cherokee keys in Bell Gardens
- 1997 Jeep Cherokee keys in Montebello
- 1997 Jeep Cherokee keys in Cudahy
- 1997 Jeep Cherokee keys in Pico Rivera
- 1997 Jeep Cherokee keys in Huntington Park
- 1997 Jeep Cherokee keys in Vernon
- 1997 Jeep Cherokee keys in South Gate
- 1997 Jeep Cherokee keys in Downey
- 1997 Jeep Cherokee keys in Monterey Park
1997 Jeep Cherokee key replacement in Commerce: frequently asked questions
Does a 1997 Jeep Cherokee key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1997 Jeep Cherokee key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Jeep key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Do I need a PIN code to program a Jeep key?
Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.
Can you program keys for a 2018 or newer Jeep with the secure gateway?
Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.
Can you unlock my 1997 Jeep Cherokee if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
What do you need from me to make a 1997 Jeep Cherokee key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
How much does a 1997 Jeep Cherokee key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Can you make a key for a 1997 Jeep Cherokee if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Is a locksmith-made Jeep key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Are you open 24 hours in Commerce?
Yes. We take calls and dispatch to Commerce 24 hours a day, including weekends and holidays.
Which parts of Commerce do you serve?
All of Commerce, including the Citadel district, the Telegraph Road corridor, the rail yard industrial district, and the Rosewood residential neighborhood, and addresses in ZIP code 90040.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
