Quick answer
Door Closer Repair: Adjusting or repairing doors that slam, close too slowly, do not latch or stay open. Big Daddy Car Key Replacement provides door closer repair service in Commerce as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Closer Repair
- Area
- Commerce, Los Angeles County, CA (90040)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What door closer repair involves
- Who we help in Commerce
- Signs you need door closer repair service
- Door Closer Repair across Commerce
- How our door closer repair service works
- Common situations in Commerce
- Tools, parts and hardware we carry
- A short glossary
- How door closer repair service is priced
- Why call Big Daddy Car Key Replacement
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- Our service standards
- Questions to ask any locksmith
- How to prepare for the visit
- Once the work is done
- Related locksmith services in Commerce
- Door Closer Repair near Commerce
- Door Closer Repair in Commerce: frequently asked questions
What door closer repair involves
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open. Most door closer complaints are adjustment problems: sweep speed, latch speed and backcheck are controlled by small valves that drift or get turned too far. Oil on the closer body or the floor, however, means the seal has failed and the closer must be replaced, since leaking units cannot be reliably rebuilt on site.

A business door has three jobs: keep the wrong people out, let everyone inside get out safely, and survive thousands of cycles a week. Our door closer repair service in Commerce covers all three, from storefront locks and exit devices to master key systems, with work scheduled around your hours of operation.
Who we help in Commerce
Our commercial customers in Commerce include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Commerce.
Signs you need door closer repair service
These are the most common reasons customers in Commerce ask for door closer repair service:
- The door slams shut
- The door closes too slowly or stops short
- Oil is leaking from the closer
- The closer arm is loose or disconnected
Door Closer Repair across Commerce
Located in Los Angeles County, Commerce is an incorporated city within our Gateway Cities service area. Customers anywhere in Commerce, including the Citadel district, the Telegraph Road corridor, the rail yard industrial district, and the Rosewood residential neighborhood, can have a mobile technician sent directly to them. Service is available throughout ZIP code 90040.
Commerce is overwhelmingly industrial, with rail yards, warehouses and distribution centers, so the work centers on commercial lock systems, exit devices, truck keys and restricted key control.
If you are out and about near Citadel Outlets, Commerce Casino, Rosewood Park, or the city’s rail yards and distribution centers, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Commerce by I-5, I-710, Atlantic Boulevard, Washington Boulevard, Telegraph Road, and Slauson Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our door closer repair service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Commerce
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The storefront door will not latch and the shop cannot be left for the night.
- A closer has failed and the front door slams hard enough to rattle the glass.
- The back door shows pry marks around the latch after the weekend.
- A manager is let go and returns only some of the keys issued.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
How door closer repair service is priced
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Commerce.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Practical advice from our locksmiths
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Give each employee access only to the doors their job requires.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Consider keypad or card access for doors with frequent staff turnover.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Commerce
Customers who need door closer repair service often ask about these as well. Each can usually be handled in the same visit to Commerce.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Restricted Key Systems
Installing key systems that prevent unauthorized key duplication.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Commercial Door Hardware Repair
Repairing commercial handles, hinges, closers, locks, latches, strikes, pivots and door frames.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
Door Closer Repair near Commerce
We provide the same door closer repair service in the communities around Commerce. See the main door closer repair page or the full list of service areas.
- Door Closer Repair in Maywood
- Door Closer Repair in East Los Angeles
- Door Closer Repair in Bell
- Door Closer Repair in Bell Gardens
- Door Closer Repair in Montebello
- Door Closer Repair in Cudahy
- Door Closer Repair in Pico Rivera
- Door Closer Repair in Huntington Park
- Door Closer Repair in Vernon
- Door Closer Repair in South Gate
- Door Closer Repair in Downey
- Door Closer Repair in Monterey Park
Door Closer Repair in Commerce: frequently asked questions
Can a leaking door closer be repaired?
No. Once hydraulic fluid leaks, the closer has lost its damping and should be replaced. If there is no leak, slamming or slow closing can almost always be corrected by adjusting the valves.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Do you have a locksmith shop in Commerce?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Commerce and the rest of the Gateway Cities area. All work is done at your location.
Which parts of Commerce do you serve?
All of Commerce, including the Citadel district, the Telegraph Road corridor, the rail yard industrial district, and the Rosewood residential neighborhood, and addresses in ZIP code 90040.
Are you open 24 hours in Commerce?
Yes. We take calls and dispatch to Commerce 24 hours a day, including weekends and holidays.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
