Quick answer
Hinge Adjustment: Adjusting or replacing hinges so doors close correctly. Big Daddy Car Key Replacement provides hinge adjustment service in Commerce as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Hinge Adjustment
- Area
- Commerce, Los Angeles County, CA (90040)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Door Hardware Services
- Phone
- (562) 550-7206
On this page
- About our hinge adjustment service
- Who we help in Commerce
- When you need hinge adjustment service
- Hinge Adjustment across Commerce
- How our hinge adjustment service works
- Situations we handle regularly
- Equipment and hardware on the van
- Terms worth knowing
- Cost factors for hinge adjustment service
- Why call Big Daddy Car Key Replacement
- Tips to avoid problems
- Why this is a job for a locksmith
- Our service standards
- Questions to ask any locksmith
- How to prepare for the visit
- Aftercare and records
- Related locksmith services in Commerce
- Hinge Adjustment near Commerce
- Hinge Adjustment in Commerce: frequently asked questions
About our hinge adjustment service
Adjusting or replacing hinges so doors close correctly. Hinges carry the full weight of the door. Stripped screw holes in the top hinge let the door sag toward the latch side, which is behind most latch and deadbolt complaints. We re-anchor hinges with long screws into the framing, shim or bend them into line, and replace worn hinges.

Doors in Commerce deal with settling foundations, seasonal humidity, sun-baked frames and years of daily use. Our hinge adjustment service corrects the misalignment, wear and loose hardware that make doors hard to close or lock, and adds reinforcement where a door is weaker than it should be.
Who we help in Commerce
Door hardware calls in Commerce come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.
This service is part of our door hardware services in Commerce.
When you need hinge adjustment service
These are the most common reasons customers in Commerce ask for hinge adjustment service:
- The top hinge screws are loose or stripped
- The door has dropped at the latch side
- Hinges squeak, bind or show metal dust
- A heavy door is pulling away from the frame
Hinge Adjustment across Commerce
Located in Los Angeles County, Commerce is an incorporated city within our Gateway Cities service area. We cover every part of Commerce, including the Citadel district, the Telegraph Road corridor, the rail yard industrial district, and the Rosewood residential neighborhood. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP code 90040.
Commerce is overwhelmingly industrial, with rail yards, warehouses and distribution centers, so the work centers on commercial lock systems, exit devices, truck keys and restricted key control.
If you are out and about near Citadel Outlets, Commerce Casino, Rosewood Park, or the city’s rail yards and distribution centers, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Commerce by I-5, I-710, Atlantic Boulevard, Washington Boulevard, Telegraph Road, and Slauson Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our hinge adjustment service works
Describe the symptom
Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.
Inspect the whole opening
The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.
Find the root cause
Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.
Agree the repair and price
You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.
Make the repair
Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.
Test under real conditions
The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Situations we handle regularly
- A latch has jammed and someone is stuck in a room.
- The door drifts open by itself because the latch no longer catches.
- The back door swings outward and its latch is visible through the gap.
- The top corner of the door rubs the frame and the paint is wearing through.
- A previous break-in left the jamb cracked around the strike.
- The deadbolt only turns if you pull the door hard toward you.
Equipment and hardware on the van
For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.
Terms worth knowing
- Bolt throw
- How far a deadbolt extends from the door edge. One inch is the standard for security.
- Latch guard
- A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
- Shim
- A thin spacer placed behind a hinge to adjust how the door sits in its frame.
- Latch
- The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
- Door wrap
- A metal plate that wraps the door edge around the lock to reinforce it against splitting.
- Strike plate
- The plate on the frame that receives the latch or bolt.
- Deadlatch
- A latch with a small plunger that stops it being pushed back with a card once the door is closed.
- Jamb
- The vertical part of the door frame that carries the hinges on one side and the strike on the other.
Cost factors for hinge adjustment service
- Extent of damage
- A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
- Adjustment or replacement
- Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
- Hardware quality
- Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
- Number of doors
- Several doors in one visit cost less per door than separate calls.
- Door and frame material
- Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
- Reinforcement level
- A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Commerce.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Tips to avoid problems
- Out-swinging doors should have hinges with non-removable pins or security studs.
- If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
- Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
- Replace hollow-core exterior doors. No lock makes a weak door strong.
- Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
- Lubricate latches and hinges lightly once a year, and wipe away the excess.
- A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
- Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
Why this is a job for a locksmith
Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Commerce
Customers who need hinge adjustment service often ask about these as well. Each can usually be handled in the same visit to Commerce.
- Latch Guard Installation
Installing latch guards to protect against forced entry.
- Door Lock Repair
Repairing lock cylinders, latches, strikes and internal mechanisms.
- Door Reinforcement
Adding security plates, reinforced strike plates, latch guards and door wrap plates.
- Door Latch Repair
Fixing latches that do not catch, stick or fail to retract.
- Door Chain Installation
Installing door chains or secondary security locks.
- Door Hardware Repair
Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly.
- Strike Plate Adjustment
Adjusting strike plates so doors latch and lock properly.
- Security Strike Plate Installation
Installing stronger strike plates with longer screws for added protection.
- Door Guard Installation
Installing flip guards, swing guards or security latches.
- Door Alignment for Locks
Fixing lock issues caused by sagging doors, shifted frames or misalignment.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles County and Ventura County.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
Hinge Adjustment near Commerce
We provide the same hinge adjustment service in the communities around Commerce. See the main hinge adjustment page or the full list of service areas.
- Hinge Adjustment in Maywood
- Hinge Adjustment in East Los Angeles
- Hinge Adjustment in Bell
- Hinge Adjustment in Bell Gardens
- Hinge Adjustment in Montebello
- Hinge Adjustment in Cudahy
- Hinge Adjustment in Pico Rivera
- Hinge Adjustment in Huntington Park
- Hinge Adjustment in Vernon
- Hinge Adjustment in South Gate
- Hinge Adjustment in Downey
- Hinge Adjustment in Monterey Park
Hinge Adjustment in Commerce: frequently asked questions
Can loose hinges cause lock problems?
Yes, it is the most common cause. A sagging door moves the latch and bolt downward so they no longer meet the strike. Securing the hinges often fixes the lock without touching it.
Can door problems be fixed without replacing the lock?
Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.
How can I make my door harder to kick in?
Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.
Why do I have to push my door to lock it in Commerce?
The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.
Will the repair damage my door or paint?
We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.
Do you work on commercial doors as well?
Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.
Why does my door lock fine in summer but not winter?
Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.
How long does a door adjustment take?
Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.
Can you make car keys in Commerce?
Yes. We cut and program car keys on site anywhere in Commerce, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you have a locksmith shop in Commerce?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Commerce and the rest of the Gateway Cities area. All work is done at your location.
How long does it take a locksmith to reach me in Commerce?
It depends on where the nearest technician is and on traffic along I-5, I-710, or Atlantic Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
