Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

2013 GMC Acadia Key Replacement in Compton, CA

Big Daddy Car Key Replacement makes 2013 GMC Acadia keys on site in Compton. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
2013 GMC Acadia Key Replacement in Compton, CA by Big Daddy Car Key Replacement

Quick answer

The 2013 GMC Acadia typically uses a remote head key, which combines a laser-cut blade, a transponder chip and lock and unlock buttons in one unit. Big Daddy Car Key Replacement makes 2013 GMC Acadia keys on site in Compton, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
2013 GMC Acadia
Typical key
Remote head key
Transponder chip
Yes
Blade
Laser-cut
Programming
Required, done on site
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 2013 GMC Acadia use?

The 2013 GMC Acadia typically uses a remote head key, which combines a laser-cut blade, a transponder chip and lock and unlock buttons in one unit.

Remote head key

A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps.

2013 GMC Acadia key replacement in Compton
Remote head key for a 2013 GMC Acadia, made on site in Compton.

How we make a 2013 GMC Acadia key

For the 2013 GMC Acadia we match the remote by its frequency and part number, cut the blade to code, program the transponder so the engine starts, and then pair the remote buttons. If your old key’s electronics still work and only the shell or blade is broken, moving them into a new case is a cheaper repair. Expect 20 to 40 minutes for most remote head keys with the vehicle present, and somewhat longer when all keys are lost.

This page covers the 2013 model year. For other years, see the GMC Acadia key replacement overview, or browse all GMC models.

How GMC key and immobilizer systems work

General Motors has used several anti-theft systems over the years. PASS-Key (VATS) keys from the late 1980s through the 1990s carry a visible resistor pellet that must match one of fifteen values. Passlock, common on trucks and compacts into the 2000s, uses a sensor in the ignition cylinder and an ordinary key. PASS-Key III and III+ use a transponder chip, and from about 2010 GM moved to laser-cut flip keys and then proximity fobs programmed through secured access.

GMC trucks and SUVs used Passlock, with no chip in the key, until the 2007 redesign brought transponder keys. Laser-cut flip keys followed around 2010 on crossovers, and push-button start reached the pickups later.

Common GMC key and lock problems

These are the issues we see most often on GMC vehicles in Compton:

  • Passlock faults that leave a security light flashing and the engine disabled for ten minutes at a time
  • Worn ignition cylinders on trucks and SUVs that will not turn or will not release the key
  • Flip-key blades that loosen or snap at the hinge
  • Proximity fobs that stop being detected after a battery or module replacement

All keys lost or just need a spare?

There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.

Stranded with your GMC right now?

If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.

2013 GMC Acadia key replacement across Compton

Located in Los Angeles County, Compton is an incorporated city within our Gateway Cities service area. Customers anywhere in Compton, including Richland Farms, Sunny Cove, Downtown Compton, the Rosecrans corridor, and the Alameda industrial corridor, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 90220, 90221, and 90222.

Compton’s neighborhoods range from the horse properties of Richland Farms to postwar tract homes and a large warehouse corridor along Alameda, with steady demand for security upgrades and vehicle keys.

Whether you are at home, at work, or stuck near Compton/Woodley Airport, the Martin Luther King Jr. Memorial, Compton College, or Gateway Towne Center, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Compton by SR-91, I-710, I-105, Compton Boulevard, Rosecrans Avenue, and Alameda Street. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.

Getting a 2013 GMC Acadia key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 2013 GMC Acadia, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 2013 GMC Acadia key in Compton
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a GMC key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 2013 GMC Acadia key

Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.

The remote itself is the main cost, followed by programming. OEM remotes cost more than quality aftermarket ones; we explain the difference and let you choose where both are available. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.

Situations we are called to most often

  • The key is locked in the trunk and the trunk release is disabled.
  • The dash reads "key not detected" and the start button does nothing.
  • A hardware-store copy opens the door but the engine will not start.
  • A used car was sold with one worn key and no spare.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.

Why drivers in Compton choose Big Daddy

Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Compton.
GMC car key service in Compton
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your GMC key

Buttons fail before anything else. A silicone cover and a light keychain extend the life of the key, and a worn rubber pad can be replaced before the circuit board is damaged.

  • When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.

Choosing a car locksmith you can trust

  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Get an itemized receipt showing labor, parts and the business details.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.

Other GMC Acadia years

Other GMC models

2013 GMC Acadia keys near Compton

We make 2013 GMC Acadia keys in the communities around Compton as well. See the main 2013 GMC Acadia key replacement page or the Compton locksmith page.

2013 GMC Acadia key replacement in Compton: frequently asked questions

The buttons on my 2013 GMC Acadia key stopped working but it still starts the car. What is wrong?

The remote transmitter has failed or its battery is dead, while the separate transponder chip is fine. Try a new battery first. If that does not help, the remote portion needs repair or replacement.

Can you replace only the shell of my GMC key?

Yes. If the circuit board and chip work, we transfer them into a new shell and cut a new blade, which costs much less than a complete key.

Will an aftermarket remote key work on my 2013 GMC Acadia?

A quality aftermarket key with the correct chip and frequency works the same as the original. Very cheap online keys are a gamble; many cannot be programmed at all.

Why is the security light flashing on my GMC and the engine will not start?

The anti-theft system does not recognize the key or the ignition sensor signal. It may be a worn key, a failed Passlock sensor or an unprogrammed chip. We diagnose which and correct it; a relearn procedure is often part of the fix.

Can a GMC key be programmed without going to the dealer?

Yes for the great majority of models. Older systems use an on-board relearn and newer ones need a diagnostic tool with security access, which we carry.

Can you program a key I bought online for my 2013 GMC Acadia?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

Do you also repair the ignition on a 2013 GMC Acadia?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Can you make a key for a 2013 GMC Acadia if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Do I have to tow my 2013 GMC Acadia to you?

No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.

Can you make a 2013 GMC Acadia key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

Do you have a locksmith shop in Compton?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Compton and the rest of the Gateway Cities area. All work is done at your location.

Is there a travel charge for Compton?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Compton, so you know the cost in advance.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

Call Now (562) 550-7206Open 24 hours · mobile locksmith