Quick answer
The 1995 Nissan Altima typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1995 Nissan Altima keys on site in Compton, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1995 Nissan Altima
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1995 Nissan Altima use?
- How we make a 1995 Nissan Altima key
- How Nissan key and immobilizer systems work
- Common Nissan key and lock problems
- All keys lost or just need a spare?
- Stranded with your Nissan right now?
- 1995 Nissan Altima key replacement across Compton
- Getting a 1995 Nissan Altima key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Nissan key?
- What affects the cost of a 1995 Nissan Altima key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Compton choose Big Daddy
- Looking after your Nissan key
- Choosing a car locksmith you can trust
- Other Nissan Altima years
- Other Nissan models
- Related automotive locksmith services in Compton
- 1995 Nissan Altima keys near Compton
- 1995 Nissan Altima key replacement in Compton: frequently asked questions
What kind of key does a 1995 Nissan Altima use?
The 1995 Nissan Altima typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1995 Nissan Altima key
For the 1995 Nissan Altima we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1995 model year. For other years, see the Nissan Altima key replacement overview, or browse all Nissan models.
How Nissan key and immobilizer systems work
Nissan and Infiniti use NATS, the Nissan Anti-Theft System, with a transponder registered in the immobilizer or body control module. The Intelligent Key added proximity entry and, from the late 2000s, push-button start. Programming requires a PIN that is calculated from a code read out of the body control module, and newer models use rolling 20-digit codes that need current equipment.
Nissan’s NATS immobilizer spread across the lineup around 2000, and the Intelligent Key followed in the mid-2000s. Every Altima since 2007 has push-button start, making it one of the most common smart-key cars on the road.
Common Nissan key and lock problems
These are the issues we see most often on Nissan vehicles in Compton:
- Steering lock (ESCL) failures on some push-button models that prevent starting
- Intelligent Keys that are not detected when the fob battery is weak
- Twist-knob ignitions that will not turn without a recognized key
- Body control module problems that erase programmed keys
All keys lost or just need a spare?
There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.
Stranded with your Nissan right now?
If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.
1995 Nissan Altima key replacement across Compton
Located in Los Angeles County, Compton is an incorporated city within our Gateway Cities service area. We cover every part of Compton, including Richland Farms, Sunny Cove, Downtown Compton, the Rosecrans corridor, and the Alameda industrial corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 90220, 90221, and 90222 ZIP codes.
Compton’s neighborhoods range from the horse properties of Richland Farms to postwar tract homes and a large warehouse corridor along Alameda, with steady demand for security upgrades and vehicle keys.
Whether you are at home, at work, or stuck near Compton/Woodley Airport, the Martin Luther King Jr. Memorial, Compton College, or Gateway Towne Center, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Compton by SR-91, I-710, I-105, Compton Boulevard, Rosecrans Avenue, and Alameda Street. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a 1995 Nissan Altima key made, step by step
Call with the year, make and model
Tell us you need a key for a 1995 Nissan Altima, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Nissan key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1995 Nissan Altima key
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Situations we are called to most often
- The dash reads "key not detected" and the start button does nothing.
- A used car was sold with one worn key and no spare.
- The ignition will not turn and the key will not come out.
- The key is locked in the trunk and the trunk release is disabled.
- A hardware-store copy opens the door but the engine will not start.
Why drivers in Compton choose Big Daddy
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your Nissan key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
Choosing a car locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Other Nissan Altima years
- 2026 Altima
- 2025 Altima
- 2024 Altima
- 2023 Altima
- 2022 Altima
- 2021 Altima
- 2020 Altima
- 2019 Altima
- 2018 Altima
- 2017 Altima
- 2016 Altima
- 2015 Altima
- 2014 Altima
- 2013 Altima
- 2012 Altima
- 2011 Altima
- 2010 Altima
- 2009 Altima
- 2008 Altima
- 2007 Altima
- 2006 Altima
- 2005 Altima
- 2004 Altima
- 2003 Altima
- 2002 Altima
- 2001 Altima
- 2000 Altima
- 1999 Altima
- 1998 Altima
- 1997 Altima
- 1996 Altima
- 1994 Altima
- 1993 Altima
Other Nissan models
- Nissan Pathfinder keys
- Nissan Sentra keys
- Nissan Maxima keys
- Nissan Frontier keys
- Nissan Quest keys
- Nissan Murano keys
- Nissan Armada keys
- Nissan Titan keys
- Nissan Versa keys
- Nissan Rogue keys
- Nissan GT-R keys
- Nissan Leaf keys
- Nissan Xterra keys
Related automotive locksmith services in Compton
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Motorcycle Key Replacement
Replacing lost or broken motorcycle keys.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
1995 Nissan Altima keys near Compton
We make 1995 Nissan Altima keys in the communities around Compton as well. See the main 1995 Nissan Altima key replacement page or the Compton locksmith page.
- 1995 Nissan Altima keys in Lynwood
- 1995 Nissan Altima keys in Willowbrook
- 1995 Nissan Altima keys in Paramount
- 1995 Nissan Altima keys in South Gate
- 1995 Nissan Altima keys in Cudahy
- 1995 Nissan Altima keys in Athens
- 1995 Nissan Altima keys in Gardena
- 1995 Nissan Altima keys in Westmont
- 1995 Nissan Altima keys in Carson
- 1995 Nissan Altima keys in Lakewood
- 1995 Nissan Altima keys in Downey
- 1995 Nissan Altima keys in Huntington Park
1995 Nissan Altima key replacement in Compton: frequently asked questions
Does a 1995 Nissan Altima key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1995 Nissan Altima key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Nissan key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
My Nissan says "No Key Detected". What should I do?
Replace the fob battery, then hold the fob against the start button while pressing it. If the car still does not respond, the fob, the antenna or the steering lock may be at fault, and we can test each.
Do all keys have to be present when programming a Nissan?
Yes on most models. Programming re-registers every key, and any key not present is erased from the system.
Will my lost 1995 Nissan Altima key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Is a locksmith-made Nissan key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
How much does a 1995 Nissan Altima key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
Do you also repair the ignition on a 1995 Nissan Altima?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
What do you need from me to make a 1995 Nissan Altima key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Is there a travel charge for Compton?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Compton, so you know the cost in advance.
Which parts of Compton do you serve?
All of Compton, including Richland Farms, Sunny Cove, Downtown Compton, and the Rosecrans corridor, and addresses in ZIP codes 90220, 90221, and 90222.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
